ETSI EN 300 392-11-1-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 11 Supplementary services stage 2 Sub-part 1 Call Identification (CI) (V1 2 1)《陆地集群无线电(TETRA)_1.pdf

《ETSI EN 300 392-11-1-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 11 Supplementary services stage 2 Sub-part 1 Call Identification (CI) (V1 2 1)《陆地集群无线电(TETRA)_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 392-11-1-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 11 Supplementary services stage 2 Sub-part 1 Call Identification (CI) (V1 2 1)《陆地集群无线电(TETRA)_1.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 392-11-1 V1.2.1 (2004-01)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 11: Supplementary services stage 2;Sub-part 1: Call Identification (CI)ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 2 Reference REN/TETRA-03096 Keywords radi

2、o, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present

3、document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of d

4、ispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and othe

5、r ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend

6、 to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit o

7、f its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 3 Contents Intellectual Property Rights6 Foreword.6 1 Scope 8 2 References 8 3 Definitions and abbreviations.9 3.1 Definitions9

8、3.2 Abbreviations .10 4 Supplementary Service Calling Line Identification Presentation (SS-CLIP) stage 2 specification.10 4.1 Functional model10 4.1.1 Functional model description10 4.1.2 Description of functional entities11 4.1.2.1 Served User CGLI Reception, FE1 .11 4.1.2.2 Served User current SwM

9、I, CGLI Presentation, FE21 .11 4.1.2.3 Group Controlling SwMI, FE2212 4.1.3 Relationship of functional model to individual call functional model12 4.1.4 Relationship of functional model to group call functional model.13 4.2 Information flows.13 4.2.1 Definition of information flows13 4.2.1.1 CGLI (C

10、allinG Line Identification) 14 4.2.2 Relationship of information flows to basic call information flows.14 4.2.3 Examples of information flow sequences .15 4.2.3.1 Normal operation of SS-CLIP.15 4.3 Functional entity actions 16 4.3.1 Functional entity actions of FE21.16 4.3.2 Functional entity action

11、s of FE1.16 4.3.3 Functional entity actions of FE22.16 4.4 Allocation of functional entities to physical equipment .16 4.5 Interworking considerations .17 5 Supplementary Service Connected Line Identification Presentation (SS-COLP) stage 2 specification .17 5.1 Functional model17 5.1.1 Functional mo

12、del description17 5.1.2 Description of functional entities18 5.1.2.1 Served User, Calling User COLI Reception, FE1.18 5.1.2.2 Served User Current SwMI, COLI Presentation, FE21 18 5.1.2.3 Group Controlling SwMI, FE2218 5.1.3 Relationship of functional model to basic individual call functional model.1

13、9 5.1.4 Relationship of functional model to basic group call functional model20 5.2 Information flows.20 5.2.1 Definition of information flows20 5.2.1.1 COLI (Connected Line Identification)21 5.2.2 Relationship of information flows to basic call information flows.21 5.2.3 Examples of information flo

14、w sequences .22 5.2.3.1 Normal operation SS-COLP in case of individual call22 5.2.4 Normal operation SS-COLP in case of group call 23 5.2.5 Functional entity actions.23 5.2.5.1 Functional entity actions of FE1 .23 5.2.5.2 Functional entity actions of FE21 .23 5.2.5.3 Functional entity actions of FE2

15、2 .23 5.3 Allocation of functional entities to physical equipment .24 5.4 Interworking considerations .24 6 Supplementary Service Calling Line Identification Restriction stage 2 specification .24 6.1 Functional model24 ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 4 6.1.1 Functional model descriptions

16、24 6.1.1.1 Functional model description for SS-CLIR in case of Individual Call .25 6.1.1.2 Functional model description for SS-CLIR in case of Group Call25 6.1.2 Description of functional entities26 6.1.2.1 Restriction Request, FE1.26 6.1.2.2 Restriction Control, Group Controlling SwMI, FE22 .26 6.1

17、.3 Relationship of functional model to basic individual call SS-CLIR functional model.27 6.1.3.1 Relationship of functional model to basic group call SS-CLIR functional model 28 6.2 Information flows.28 6.2.1 Definition of information flows28 6.2.1.1 RESTRICT28 6.2.2 Relationship of information flow

18、s to basic call information flows.29 6.2.3 Examples of information flow sequences .29 6.2.3.1 Normal operation of SS-CLIR in case of individual call 30 6.2.3.2 Normal operation of SS-CLIR in case of Group Call .31 6.3 Functional entity actions 31 6.3.1 SS-CLIR Individual call .31 6.3.1.1 Functional

19、entity actions of FE1 .31 6.3.1.2 Functional entity actions of FE21 .31 6.3.1.3 Functional entity actions of FE25 .32 6.3.2 SS-CLIR Group call32 6.3.2.1 Functional entity actions of FE1 .32 6.3.2.2 Functional entity actions of FE21 .32 6.3.2.3 Functional entity actions of FE22 .32 6.4 Allocation of

20、functional entities to physical equipment .32 6.5 Interworking considerations .32 7 Supplementary Service Connected Line Restriction stage 2 specification 33 7.1 Functional model33 7.1.1 Functional model descriptions 33 7.1.1.1 Functional model description for SS-COLR in case of individual call .33

21、7.1.1.2 Functional model of SS-COLR in case of group call34 7.1.2 Description of functional entities35 7.1.2.1 Functional entities in case of SS-COLR individual call35 7.1.2.1.1 Restriction Request, FE1 .35 7.1.2.1.2 Restriction Control, FE2135 7.1.2.2 Relationship of functional model to basic indiv

22、idual call COLR functional model35 7.1.2.3 Functional entities in case of SS-COLR group call.36 7.1.2.3.1 Served User, FE1.36 7.1.2.3.2 Group controlling SwMI, FE22.36 7.1.2.3.3 Calling User, Affected user SwMI FE25.36 7.1.2.3.4 Calling User MS FE5 36 7.1.2.4 Relationship of functional model to basi

23、c group call COLR functional model 37 7.2 Information flows.37 7.2.1 Definition of information flows37 7.2.1.1 RESTRICT37 7.2.2 Relationship of information flows to basic call information flows.38 7.2.3 Examples of information flow sequences .38 7.2.3.1 Normal operation of SS-COLR in case of individ

24、ual call.39 7.2.3.2 Normal operation of SS-COLR in case of Group Call39 7.3 Functional entity actions 40 7.3.1 SS-COLR individual call 40 7.3.1.1 Functional entity actions of FE1 .40 7.3.1.2 Functional entity actions of FE21 .41 7.3.1.3 Functional entity actions of FE25 .41 7.3.2 SS-COLR group call.

25、41 7.3.2.1 Functional entity actions of FE1 .41 7.3.2.2 Functional entity actions of FE22 .41 7.3.2.3 Functional entity actions of FE25 .41 7.3.2.4 Functional entity action of FE5.41 7.4 Allocation of functional entities to physical equipment .42 ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 5 Annex A

26、(informative): Bibliography.43 History 44 ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ET

27、SI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/we

28、bapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may bec

29、ome, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Terrestrial Trunked Radio (TETRA). The present document had been published as ETS 300 392-11-1. During the maintenance it was converted into an EN. The present docume

30、nt is part 11, sub-part 1 of a multi-part deliverable covering the Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2: “Air Interface (AI)“; EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-

31、4: “Gateways basic operation“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392-7: “Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplementary services stage 1“; EN 300 392-11: “Supplementary services stage 2“; EN 300 392-11-1: “Call Ide

32、ntification (CI)“; ETS 300 392-11-2: “Call Report (CR)“; ETS 300 392-11-3: “Talking Party Identification (TPI)“; EN 300 392-11-4: “Call Forwarding (CF)“; ETS 300 392-11-5: “List Search Call (LSC)“; EN 300 392-11-6: “Call Authorized by Dispatcher (CAD)“; ETS 300 392-11-7: “Short Number Addressing (SN

33、A)“; EN 300 392-11-8: “Area Selection (AS)“; ETS 300 392-11-9: “Access Priority (AP)“; EN 300 392-11-10: “Priority Call (PC)“; ETS 300 392-11-11: “Call Waiting (CW)“; EN 300 392-11-12: “Call Hold (HOLD)“; ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 7 ETS 300 392-11-13: “Call Completion to Busy Subscr

34、iber (CCBS)“; EN 300 392-11-14: “Late Entry (LE)“; ETS 300 392-11-16: “Pre-emptive Priority Call (PPC)“; EN 300 392-11-17: “Include Call (IC)“; EN 300 392-11-18: “Barring of Outgoing Calls (BOC)“; EN 300 392-11-19: “Barring of Incoming Calls (BIC)“; ETS 300 392-11-20: “Discreet Listening (DL)“; EN 3

35、00 392-11-21: “Ambience Listening (AL)“; ETS 300 392-11-22: “Dynamic Group Number Assignment (DGNA)“; ETS 300 392-11-23: “Call Completion on No Reply (CCNR)“; ETS 300 392-11-24: “Call Retention (CRT)“; EN 300 392-12: “Supplementary services stage 3“; ETS 300 392-13: “SDL model of the Air Interface (

36、AI)“; ETS 300 392-14: “Protocol Implementation Conformance Statement (PICS) proforma specification“. TS 100 392-15: “TETRA frequency bands, duplex spacing and channel numbering“; TS 100 392-16: “Network Performance Metrics“; TS 100 392-17: “TETRA V+D and DMO Release 1.1 specifications“. National tra

37、nsposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 September 2004 Date of withdrawal of any conflicting National Standard (dow): 30 Septem

38、ber 2004 ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 8 1 Scope The present document specifies the stage 2 description of the Supplementary Services CLIP, CLIR and COLP all part of Call Identification for the Terrestrial Trunked Radio (TETRA). The term “Line“ is used in the present document by extensi

39、on to the air interface and to keep those supplementary service names at the Air Interface in TETRA Radio based network. Calling Line Identification Presentation (SS-CLIP) is a supplementary service which is offered to the connected user and which provides either the calling users identity (ITSI for

40、 TETRA) in case of individual call or the calling user identity (GTSI is presented as part of the normal group call set-up) in case of group call. COnnected Line Identification Presentation (SS-COLP) is a supplementary service which is offered to the calling user and which provides the connected use

41、rs identity (connected ITSI for individual call, connected GTSI for a group call). Calling/Connected Line Identification Restriction (SS-CLIR) is a supplementary service offered to a user to restrict presentation of that users ITSI to another user. The generic term SS-CLIR covers in fact two differe

42、nt supplementary services: SS-CLIR (Calling Line Identity Restriction) and SS-COLR (COnnected Line identity Restriction). Contrary to ECMA-148 9 and in line with public ISDN, the two services have been split in the present document to improve its readability. Man-Machine Interface and charging princ

43、iples are outside the present document. Supplementary service specifications are produced in three stage according to the method defined in ITU-T Recommendation I.130 1. The stage 2 description identifies the functional capabilities and the information flows needed to support the supplementary servi

44、ce as specified in its stage 1 description (see EN 300 392-10-1 7). The stage 2 description is followed by the stage 3 description (see EN 300 392-12-1 8, which specifies the protocols at the air interface and at the various Inter-System Interfaces (ISI) to support the service. The present document

45、is applicable to MS and SwMIs involved in the operation of those supplementary services. Specifications of interworking gateways to non-TETRA networks (mainly PSTN and ISDN) are outside the scope of the present document. The stage 2 descriptions for the SS-CLIP, SS-CLIR and SS-COLP are derived from

46、ECMA-148 9 taken as normative reference for the corresponding supplementary services for Private Integrated Services Networks (PISNs). NOTE: The stage 2 description is followed by the stage 3 description, which specifies the encoding rules for the information flows and process behaviour for the diff

47、erent entities in SwMI and MS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For

48、 a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ITU-T Recommendation I.130: “Method for

49、the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN“. 2 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, functional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000) modified“. ETSI ETSI EN 300 392-11-1 V1.2.1 (2004-01) 9 3 ETSI EN 300 392-1: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 1: General network design“. 4 ETSI EN 300 392-3-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Pa