ETSI EN 300 330-2-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment in the frequency range 9 kHz to 25 MHz and inductive_1.pdf

《ETSI EN 300 330-2-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment in the frequency range 9 kHz to 25 MHz and inductive_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 330-2-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment in the frequency range 9 kHz to 25 MHz and inductive_1.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 330-2 V1.6.1 (2015-03) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requir

2、ements of article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, includin

3、g IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN)

4、has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been produced by ETSI in response to mandate M/284 issued from the Eur

5、opean Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.7. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/

6、EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC i.2 are summarized in

7、annex A. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz, as identif

8、ied below: Part 1: “Technical characteristics and test methods“; Part 2: “Harmonized EN covering the essential requirements of article 3.2 of the R and 2) inductive loop transmitters operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID) and EAS equipments operating in LF and

9、 HF ranges and for radio equipment including wireless power transfer (WPT) function in the same frequency range; 3) receivers of systems as defined by bullets 1 and 2; 4) these radio equipment types are capable of operating in the permitted frequency bands within the 9 kHz to 30 MHz range as specifi

10、ed in table 1: - either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna; - for all types of modulation; - with or without speech. Table 1 shows a list of the frequency bands as designated to Short Range Devices by some European Commission Decisions and

11、 the CEPT/ERC/REC 70-03 i.5 as known at the date of publication of the present document. Table 1: Frequency bands designated to Short Range Devices within 9 kHz to 30 MHz Frequency Bands/frequencies Applications Transmit and Receive 9 kHz to 90 kHz Inductive devices, Generic use Transmit and Receive

12、 90 kHz to 119 kHz Inductive devices, Generic use Transmit and Receive 119 kHz to 140 kHz Inductive devices, Generic use Transmit and Receive 140 kHz to 148,5 kHz Inductive devices, Generic use Transmit and Receive 148,5 kHz to 5 MHz Inductive devices, Generic use Transmit and Receive 400 kHz to 600

13、 kHz RFID only Transmit and Receive 5 kHz to 30 MHz Inductive devices, Generic use Transmit and Receive 3 155 kHz to 3 400 kHz Inductive devices, Generic use Transmit and Receive 4 234 kHz Inductive devices, Railway applications Transmit and Receive 4 516 kHz Inductive devices, Railway applications

14、Transmit and Receive 6 765 kHz to 6 795 kHz Inductive devices, Generic use Transmit and Receive 7 400 kHz to 8 800 kHz Inductive devices, Generic use Transmit and Receive 10 200 kHz to 11 000 kHz Inductive devices, Generic use Transmit and Receive 11 810 kHz to 15 310 kHz RFID only Transmit and Rece

15、ive 12,5 MHz to 20 MHz Inductive devices, Wireless healthcare Transmit and Receive 13,553 MHz to 13,567 MHz Inductive devices, Generic use Transmit and Receive 26,957 MHz to 27,283 MHz Inductive devices, Generic use Transmit and Receive 27,095 MHz Inductive devices, Railway applications NOTE 1: It s

16、hould be noted that table 1 represents the most widely implemented position within the European Union and the CEPT countries, but it should not be assumed that all designated bands are available in all countries. NOTE 2: In addition, it should be noted that other frequency bands may be available in

17、a country within the frequency range 9 kHz to 30 MHz covered by the present document. ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 7 NOTE 3: On non-harmonized parameters, national administrations may impose certain conditions such as the type of modulation, frequency, channel/frequency separations, maxim

18、um transmitter radiated power, duty cycle, and the inclusion of an automatic transmitter shut-off facility, as a condition for the issue of an Individual Rights for use of spectrum or General Authorization, or as a condition for use under “licence exemption“ as it is in most cases for Short Range De

19、vices. The present document covers fixed stations, mobile stations and portable stations. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC i.2 (R Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems

20、 in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies

21、. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessa

22、ry for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regu

23、lations. i.2 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R A guide to the production of candidate Harmonized Standards for application under the R it pro

24、vides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each requirement to be either: - Unconditional: meaning that the req

25、uirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support optional functionality defined within the schedule. in the case of Conditional requirements, it associates the requirement with the particular optional serv

26、ice or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with the referenced procedures; - Other: meaning that the test procedure is il

27、lustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard ETSI EN 300 330-2 The following requirements and test specifications are relevant to the presumption of conform

28、ity under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with satisfactory outcomes is a necessary condition for a presumption of

29、 conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in the technical

30、 construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly. Where no test is specified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI EN 300 330-2 V1.6.1 (2015-

31、03) 13 Annex B (informative): Void ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 14 Annex C (informative): Bibliography Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive). Council Directive 73/23/EEC of

32、 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (LV Directive). Council Directive 93/42/EEC concerning medical devices. Council Directive 90/385/EEC concerning active implantable medical devices. ETSI

33、 ETSI EN 300 330-2 V1.6.1 (2015-03) 15 History Document history Edition 1 December 1994 Publication as ETSI ETSI I-ETS 300 330 Amendment 1 January 1997 Amendment 1 to 1st Edition of ETSI I-ETS 300 330 V1.2.2 May 1999 Publication as ETSI EN 300 330 V1.1.1 June 2001 Publication V1.3.1 April 2006 Publication V1.5.1 February 2010 Publication V1.6.0 June 2014 EN Approval Procedure AP 20141017: 2014-06-19 to 2014-10-17 V1.6.1 December 2014 Vote V 20150220: 2014-12-22 to 2015-02-20 V1.6.1 March 2015 Publication