ETSI EN 300 065-3-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational i_1.pdf

《ETSI EN 300 065-3-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational i_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 065-3-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational i_1.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 065-3 V1.2.1 (2009-05)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Narrow-band direct-printing telegraph equipmentfor receiving meteorological or navigationalinformation (NAVTEX);Part 3: Harmonized EN covering the

2、 essential requirements ofarticle 3.3 (e) of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IP

3、R Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword Thi

4、s Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive

5、 98/34/EC i.1 laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the D

6、irective 1999/5/EC i.2 of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Part 2: “Harmonized EN covering the essential requirements of article 3.2 of the R Part 3: “Harmoni

7、zed EN covering the essential requirements of article 3.3(e) of the R - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were va

8、lid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edit

9、ion of the referenced document (including any amendments) applies. 1 ETSI EN 300 065-1 (V1.2.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Part 1: Technical chara

10、cteristics and methods of measurement“. 2 ETSI TR 100 028 (V.1.3.1) (All parts): “ Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 82.2 Informative references The foll

11、owing referenced documents are not essential to the use of the ETSI deliverable but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 Directive 98/34/EC of the European Par

12、liament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. i.2 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment

13、and the mutual recognition of their conformity (R the value of the measurement uncertainty for the measurement of each parameter shall be included in the test report; the recorded value of the measurement uncertainty shall be, for each measurement, equal to or lower than the figures in table 1. For

14、the test methods, according to the present document, the measurement uncertainty figures shall be calculated in accordance with TR 100 028 2 and shall correspond to an expansion factor (coverage factor) k = 1,96 or k = 2 (which provide confidence levels of respectively 95 % and 95,45 % in the case w

15、here the distributions characterizing the actual measurement uncertainties are normal (Gaussian). Table 1 is based on such expansion factors. Table 1: Maximum measurement uncertainty Parameter Uncertainty Radio frequency 1 10-7Audio frequency 1 10-5ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 155.3 Essen

16、tial radio test suites 5.3.1 Environmental tests 5.3.1.1 Introduction Environmental tests shall be carried out before tests are performed on the same equipment with respect to the other requirements of the present document. 5.3.1.2 Vibration test The vibration test method is given in EN 300 065-1 1,

17、 clause 5.6.1.1. 5.3.1.3 Temperature tests 5.3.1.3.1 Dry heat The dry heat test method is given in EN 300 065-1 1, clause 5.6.2.1.1. 5.3.1.3.2 Damp heat The damp heat test method is given in EN 300 065-1 1, clause 5.6.2.2.1. 5.3.1.4 Low temperature The low temperature test method is given in EN 300

18、065-1 1, clause 5.6.2.3.1. 5.3.2 Conformance tests 5.3.2.1 Protection of input circuits The test method is given in EN 300 065-1 1, clause 6.6. 5.3.2.2 Sensitivity test The test method is given in EN 300 065-1 1, clause 6.1.2. 5.3.2.3 Simulataneous reception test The test method is given in EN 300 0

19、65-1 1, clause 6.7.2. 5.3.2.4 Message processing test, B1 characters The test method is given in EN 300 065-1 1, clause 6.8.1. 5.3.2.5 Message processing test, B2 characters The test method is given in EN 300 065-1 1, clause 6.8.2. 5.3.2.6 SAR alarm test The test method is given in EN 300 065-1 1, c

20、lause 6.8.4. 5.3.2.7 Out of paper alarm and storage inhibition The test method is given in EN 300 065-1 1, clause 6.9.1. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 165.3.2.8 Automatic line and paper feed The test method is given in EN 300 065-1 1, clause 6.9.2. 5.3.2.9 Corrupted characters The test met

21、hod is given in EN 300 065-1 1, clause 6.9.3. 5.3.2.10 Corrupted characters in the preamble The test method is given in EN 300 065-1 1, clause 6.9.4. 5.3.2.11 Messages with B3, B4 = 00 The test method is given in EN 300 065-1 1, clause 6.9.5. 5.3.2.12 Storage, tagging and erasure The test method is

22、given in EN 300 065-1 1, clause 6.10.1. 5.3.2.13 Erasure of messages by timeout The test method is given in EN 300 065-1 1, clause 6.10.2. 5.3.2.14 Storage of message identifications The test method is given in EN 300 065-1 1, clause 6.10.3. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 17Annex A (normati

23、ve): HS Requirements and conformance Test specifications Table (HS-RTT) The HS Requirements and conformance Test specifications Table (HS-RTT) in table A.1 serves a number of purposes, as follows: it provides a statement of all the requirements in words and by cross reference to (a) specific clause(

24、s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific ref

25、erenced document(s); it qualifies each requirement to be either: - Unconditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependant on the manufacturer having chosen to support optional functionality defined within the schedule. in

26、 the case of Conditional requirements, it associates the requirement with the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated

27、to be met in accordance with the referenced procedures; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 18Table A.1: HS Requirements and conformance Test specifications Ta

28、ble (HS-RTT) Harmonized Standard EN 300 065-3 The following requirements and test specifications are relevant to the presumption of conformity under the article 3.3(e) of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the

29、 requirement. The completion of all tests classified “E“ as specified with satisfactory outcomes is a necessary condition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conform

30、ance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced ex

31、plicitly. Where no test is specified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 20Annex B (informative): The EN title in the official languages The enlargement of the European Union (EU) resulted in a requirement from the EU for a lar

32、ger number of languages for the translation of the titles of Harmonized Standards and mandated ENs that are to be listed in the Official Journal to support the implementation of this legislation. For this reason the title translation concerning the present document can be consulted via the e-approva

33、l application. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 21Annex C (informative): Bibliography Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive). Council Directive 73/23/EEC of 19 February 1973 on

34、the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (LV Directive). ETSI EG 201 399: “Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive“. ETSI ETSI EN 300 065-3 V1.2.1 (2009-05) 22History Document history V1.1.1 May 2001 Publication V1.2.1 January 2009 One-step Approval Procedure OAP 20090514: 2009-01-14 to 2009-05-14 V1.2.1 May 2009 Publication