ETSI EG 201 299-1-2000 Integrated Services Digital Network (ISDN) Network Integration Testing (NIT) ISDN PSTN End-To-End Testing Part 1 Test Suit Structure and Test Purposes (TSS&T_1.pdf

《ETSI EG 201 299-1-2000 Integrated Services Digital Network (ISDN) Network Integration Testing (NIT) ISDN PSTN End-To-End Testing Part 1 Test Suit Structure and Test Purposes (TSS&T_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EG 201 299-1-2000 Integrated Services Digital Network (ISDN) Network Integration Testing (NIT) ISDN PSTN End-To-End Testing Part 1 Test Suit Structure and Test Purposes (TSS&T_1.pdf（149页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI EG 201 299-1 2.1.1 (2000-03) ETSI Guide Integrated Services Digital Network (ISDN); Network Integration Testing (NIT); ISDN/PSTN end-to-end testing; Part 1: Test Suit Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which

2、is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in

3、 SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Guide (EG) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 1 of a multi-part

4、EG covering Integrated Services Digital Network (ISDN); Network Integration Testing (NIT); ISDNPSTN end-to-end testing, as identified below: Part 1: Part 2: “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXI

5、T) proforma for the network“. Introd uction The present document contains the Test Suite Structure and Test Purposes (TSS Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1: Protocol specification ITU-T Recommendation Q.

6、93 1 (1993), modified“. EN 300 267-1: “Integrated Services Digital Network (ISDN); Telephony 7 kHz, videotelephony, audiographic conference and videoconference teleservices; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. Pl 31 ETS 300 080: “Integrated

7、 Services Digital Network (ISDN); ISDN lower layer protocols for telematic terminals“. 41 ETS 300 103: “Integrated Services Digital Network (ISDN); Support of CCITT Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an ISDN Synchronous and asynchronous terminal adapt

8、ation functions“. Pl EN 300 092- 1: “Integrated Services Digital Network (ISDN); Calling Line Identification Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. 61 EN 300 093- 1: “Integrated Services Digital Netwo

9、rk (ISDN); Calling Line Identification Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. VI EN 300 097-1: “Integrated Services Digital Network OSDN); Connected Line Identification Presentation (COLP) supplementar

10、y service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 098-1: “Integrated Services Digital Network OSDN); Connected Line Identification Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol;

11、Part 1: Protocol specification“. EN 300 138-1: “Integrated Services Digital Network (ISDN); Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 06 1-1: “Integrated Services Digital Network (ISDN); Subad

12、dressing (SUB) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. ETSI 7 ETSI EG 201 299-1 V2.1.1 (2000-03) EN 300 055- 1: “Integrated Services Digital Network (ISDN); Terminal Portability (TP) supplementary service; Digital Subscri

13、ber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 286- 1: “Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 185

14、-1: “Integrated Services Digital Network (ISDN); Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 207-1: “Integrated Services Digital Network (ISDN); Diversion supplementary services; Digital

15、Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 210-1: “Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 130-1: “Int

16、egrated Services Digital Network (ISDN); Malicious Call Identification (MCID) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 188-1: “Integrated Services Digital Network (ISDN); Three-Party (3PTY) supplementary service; Di

17、gital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 141-1: “Integrated Services Digital Network (ISDN); Call Hold (HOLD) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 058-

18、 1: “Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. EN 300 356-1: “Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3

19、 for the international interface; Part 1: Basic services ITU-T Recommendations Q.761 to Q.764 (1997), modified“. EN 300 369-1: “Integrated Services Digital Network (ISDN); Explicit Call Transfer (ECT) supplementary service; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Proto

20、col specification“. EN 300 195-1: “Integrated Services Digital Network (ISDN); Supplementary service interactions; Digital Subscriber Signalling System No. one (DSS i) protocol; Part 1: Protocol specification“. ETS 300 289: “Business TeleCommunications (BTC); 64 kbitls digital unrestricted leased li

21、ne with octet integrity (D64U); Connection characteristics“. ITU-T Recommendation G.821: “Error performance of an international digital connection operating at a bit rate below the primary rate and forming part of an integrated services digital network“. CCITT Recommendation G.822 (1988): “Controlle

22、d slip rate objectives of an international digital connection“. CCITT Recommendation O. 152 (1988): “Error performance measuring equipment for 64 kbitls paths“. CCITT Recommendation 1.1 12 (1988): “Vocabulary and terms for ISDNs“. CCITT Recommendation 1.210 (1988): “Principles of the telecommunicati

23、on services supported by an ISDN and the means to describe them“. ETSI 8 ETSI EG 201 299-1 V2.1.1 (2000-03) 411 421 CCITT Recommendation E. 164 (1988): “Numbering plan for the ISDN era“. ISO/IEC 9646-1: “Information Technology - OS1 Conformance Testing Methodology and Framework - Part 1: General Con

24、cepts“. ITU-T Recommendation G.7 11: “Pulse code modulation (PCM) of voice frequencies“. ITU-T Recommendation H.221: “Frame structure for a 64 to 1920 kbitls channel in audiovisual teleservices“. ITU-T Recommendation F.721: “ Videotelephony teleservice for ISDN“. ITU-T Recommendation F. 182: “Guidel

25、ines for the support of the communication of documents using Group 3 facsimile between user terminals via public networks“. ISO/IEC 7776: “Information technology - Telecommunications and information exchange between systems - High-level data link control procedures - Description of the X.25 LAPB-com

26、patible DTE data link procedures“. ISO/IEC 8208: “Information technology - Data communications - X.25 Packet Layer Protocol for Data Terminal Equipment“. EG 201 018: “Integrated Services Digital Network (ISDN); Application of the Bearer Capability (BC), High Layer Compatibility (HLC) and Low Layer C

27、ompatibility (LLC) information elements by terminals supporting ISDN services“. ETS 300 097-UAl: “Integrated Services Digital Network (ISDN); Connected Line Identification Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol speci

28、fication“. ITU-T Recommendation Q.737.1: “User-to-user signalling (UUS)“. ITU-T Recommendation Q.699: “Interworking between ISDN access and non-ISDN access over ISDN User Part of Signalling System No. 7“. ITU-T Recommendation Q.734.2: “Three-party service“. EN 300 196-1: “Integrated Services Digital

29、 Network (ISDN); Generic functional protocol for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. EN 300 359-1: “Integrated Services Digital Network (ISDN); Completion of Calls to Busy Subscriber (CCBS) supplementa

30、ry service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. EN 300 357: “Integrated Services Digital Network (ISDN); Completion of Calls to Busy Subscriber (CCBS) supplementary service; Service description“. EN 301 065-1: “Integrated Services Digital N

31、etwork (ISDN); Completion of Calls on No Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. EN 300 O0 1: “Attachments to the Public Switched Telephone Network (PSTN); General technical requirements for equipment connect

32、ed to an analogue subscriber interface in the PSTN“. ETS 300 648: “Public Switched Telephone Network (PSTN); Calling Line Identification Presentation (CLIP) supplementary service; Service description“. EN 300 659: “Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loo

33、p for display (and related) services“. ITU-T Recommendation V.110: “Support by an ISDN of data terminal equipments with V-Series type interfaces“. ETSI 9 ETSI EG 201 299-1 V2.1.1 (2000-03) POI ITU-T Recommendation X.30: “Support of X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by

34、 an Integrated Services Digital Network (ISDN)“. 3 Def i n it i o ns For the purposes of the present document, the following terms and definitions apply. 3.1 Definitions related to conformance testing Abstract Test Suite: refer to ISO/IEC 9646-1 30 Implementation Under Test: refer to ISO/IEC 9646-1

35、30 Lower Tester: refer to ISO/IEC 9646-1 30 Implementation Conformance Statement (ICs) proforma: refer to ISO/IEC 9646-1 30 Implementation extra Information for Testing (IXIT) proforma: refer to ISO/IEC 9646- 1 30 Point of Control and Observation: refer to ISO/IEC 9646-1 30 Protocol Implementation C

36、onformance Statement: refer to ISO/IEC 9646-1 30 Protocol Implementation extra Information for Testing: refer to ISO/IEC 9646-1 30 System Under Test: refer to ISO/IEC 9646-1 30 Test Purpose: refer to ISO/IEC 9646-1 30 3.2 Definitions related to EN 300 403-1 User: DSS 1 protocol entity at the User si

37、de of the user-network interface where a T reference point or coincident S and T reference point applies User (S/T): DSS 1 protocol entity at the User side of the user-network interface where a coincident S and T reference point applies User (T): DSS 1 protocol entity at the User side of the user-ne

38、twork interface where a T reference point applies (User is the Private ISDN) Integrated Services Digital Network (ISDN): see CCITT Recommendation I. 112 27, subclause 2.2 definition 308 Service: telecommunications service: see CCITT Recommendation I. 112 27, subclause 2.2 definition 20 1 Supplementa

39、ry service: see CCITT Recommendation 1.210 28, subclause 2.4 ISDN number: number conforming to the numbering and structure specified in CCITT Recommendation E. 164 29 3.3 Definitions related to test purpose descriptions BC = speech: bearer capability information element with its information transfer

40、 capability field set to “speech“ and its user information layer one protocol field set to “G.711 31 A-law BC = 3,l kHz audio: bearer capability information element with its information transfer capability field set to “3,l kHz Audio“ and its user information layer one protocol field set to “G.711 3

41、1 A-law BC = UDI: bearer capability information element with its information transfer capability set to “unrestricted digital information“ ETSI 10 ETSI EG 201 299-1 V2.1.1 (2000-03) BC = UDUTA: bearer capability information element with its information transfer capability set to “unrestricted digita

42、l information with tones/announcements“ and its user information layer one protocol field set to “Recommendations H.221 32 and H.242“ BC = ITU-T Recommendation V.110 49 / ITU-T Recommendation X.30 50: a Bearer capability information element with its information transfer capability set to “unrestrict

43、ed digital information“ and its user information layer I field set to “CCITT standardized rate adaption ITU-T Recommendation V.110 49 / ITU-T Recommendation X.30 50“, including sync/async and user rate values HLC = telephony: High Layer compatibility information element with its high layer character

44、istics identification field set to “telephony“ HLC = videotelephony-ic: High Layer compatibility information element with its high layer characteristics identification field set to “videotelephony (ITU-T Recommendation F.721 33)“ and its extended audiovisual characteristics field set to “capability

45、set of initial channel of ITU-T Recommendation H.221 32“ HLC = facsimile group 2/3: High Layer compatibility information element with its high layer characteristics identification field set to “facsimile group 2/3 (ITU-T Recommendation F. 182 34)“ HLC = facsimile group 4: High Layer compatibility in

46、formation element with its high layer characteristics identification field set to “facsimile group 4 class 1“ HLC = telex: High Layer compatibility information element with its high layer characteristics identification field set to “telex“ LLC = telematic-term: Low Layer compatibility information el

47、ement with its user information layer 2 field indicating “ISO/IEC 7776 DTE-DTE 35 operation“ and user information layer 3 field indicating “ISO/IEC 8208 36“ LLC = voice band data via modem: Low Layer compatibility information element with its user information layer I field indicating a “modem type“

48、coding LLC = ITU-T Recommendation V.110 49 / ITU-T Recommendation X.30 50: a Low Layer compatibility information element with its user information layer 1 field indicating “CCITT standardized rate adaption ITU-T Recommendation V. 110 49 / ITU-T Recommendation X.30 50“ and including sync/async and us

49、er rate values telephony 7 kHz fallback not allowed SETUP message: SETUP message containing a single BC = UDI/TA and a HLC = telephony videotelephony fallback not allowed SETUP message: SETUP message containing a single BC = UDI/TA and a single HLC = videotelephony-ic SI = UPVP: Screening Indicator forwarded to the served user coded as “User-provided, verified and passed“ SI = NP: Screening Indicator forwarded to the served user coded as “Network provided“ PI = PR: Presentation Indicator forwarded to the served user cod