EN ISO TS 14907-2-2016 en Electronic fee collection - Test procedures for user and fixed equipment - Part 2 Conformance test for the on-board unit application interface.pdf

《EN ISO TS 14907-2-2016 en Electronic fee collection - Test procedures for user and fixed equipment - Part 2 Conformance test for the on-board unit application interface.pdf》由会员分享，可在线阅读，更多相关《EN ISO TS 14907-2-2016 en Electronic fee collection - Test procedures for user and fixed equipment - Part 2 Conformance test for the on-board unit application interface.pdf（86页珍藏版）》请在麦多课文档分享上搜索。

1、PD CEN ISO/TS 14907-2:2016Electronic fee collection Testprocedures for user and fixedequipmentPart 2: Conformance test for the on-board unit application interface (ISO/TS14907-2:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06PD CEN ISO/TS 14907-2:2016 PUBLISHED

2、 DOCUMENTNational forewordThis Published Document is the UK implementation of CEN ISO/TS14907-2:2016. It supersedes DD CEN ISO/TS 14907-2:2011 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Intelligent transport systems.A list of organizations

3、represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0

4、580 92444 6ICS 35.240.60; 43.040.15Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments issued since publicationDate Text affectedTECHNICAL

5、SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 14907-2 August 2016 ICS 43.040.15; 35.240.60 Supersedes CEN ISO/TS 14907-2:2011English Version Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit applicatio

6、n interface (ISO/TS 14907-2:2016) Perception du tlpage - Modes opratoires relatifs aux quipements embarqus et aux quipements fixes -Partie 2: Essai de conformit de linterface dapplication de lunit embarque (ISO/TS 14907-2:2016) Elektronische Gebhrenerhebung - Testverfahren fr straenseitige und fahrz

7、eugseitige Einrichtungen - Teil 2: Konformittsprfungen fr die Anwendungsschnittstelle der fahrzeugseitigen Einrichtung (ISO/TS 14907-2:2016) This Technical Specification (CEN/TS) was approved by CEN on 26 June 2016 for provisional application. The period of validity of this CEN/TS is limited initial

8、ly to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the

9、CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies

10、of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain

11、, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide f

12、or CEN national Members. Ref. No. CEN ISO/TS 14907-2:2016 EPD CEN ISO/TS 14907-2:2016CEN ISO/TS 14907-2:2016 (E) 3 European foreword This document (CEN ISO/TS 14907-2:2016) has been prepared by Technical Committee ISO/TC 204 “Intelligent transport systems” in collaboration with Technical Committee C

13、EN/TC 278 “Intelligent transport systems” the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Thi

14、s document supersedes CEN ISO/TS 14907-2:2011. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

15、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/

16、TS 14907-2:2016 has been approved by CEN as CEN ISO/TS 14907-2:2016 without any modification. PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 43 Terms and definitions . 54 Abbreviated terms 65 OBU and supporting information . 85.1 ICS 85.2 I

17、XIT 86 Testing requirements 96.1 Conceptual test architecture . 96.2 Conformance test system 106.2.1 Functionality of tester 106.2.2 Conformance testing 116.3 Test documentation . 116.3.1 Tester 116.3.2 Test methods and test cases 116.3.3 Test results . 11Annex A (normative) Implementation conforman

18、ce statement proforma .12Annex B (normative) Implementation of extra information for testing (IXIT) proforma .25Annex C (informative) OBU test cases 29Annex D (informative) OBE conformance test procedures conducted in Japan .70Bibliography .75 ISO 2016 All rights reserved iiiContents PagePD CEN ISO/

19、TS 14907-2:2016ISO/TS 14907-2:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body i

20、nterested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechn

21、ical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO do

22、cuments should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respons

23、ible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given fo

24、r the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following UR

25、L: Foreword Supplementary information .The committee responsible for this document is ISO/TC 204, Intelligent transport systems.This third edition cancels and replaces the second edition (ISO/TS 14907-2:2011), which has been technically revised with the following changes: updated references to claus

26、es and annexes in accordance with ISO 14906:2011/Amd1:2015; updated Annex D to reflect current situation in Japan.ISO/TS 14907 consists of the following parts, under the general title Electronic fee collection Test procedures for user and fixed equipment: Part 1: Description of test procedures Part

27、2: Conformance test for the on-board unit application interfaceiv ISO 2016 All rights reservedPD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)IntroductionThis part of ISO/TS 14907 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures for elec

28、tronic fee collection (EFC) applications. ISO 2016 All rights reserved vPD CEN ISO/TS 14907-2:2016PD CEN ISO/TS 14907-2:2016Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the on-board unit application interface1 ScopeThis part of ISO/TS 14907 desc

29、ribes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011/Amd1:2015, for electronic fee collection (EFC) applications. After the tests of isolated data items and function

30、s (C.2 to C.4), an example is given for testing of a complete EFC transaction (C.3).The scope of this part of ISO/TS 14907 comprises definitions of OBU conformance assessment tests of basic dedicated short-range communication (DSRC) L7 functionality, EFC application functions, EFC attributes (i.e. E

31、FC application information), the addressing procedures of EFC attributes and (hardware) components e.g. integrated circuit cards (ICC) and man-machine interfaces (MMI), the EFC transaction model, which defines the common elements and steps of any EFC transaction, and the behaviour of the interface s

32、o as to support interoperability on an EFC-DSRC application interface level, see Figure 1.TECHNICAL SPECIFICATION ISO/TS 14907-2:2016(E) ISO 2016 All rights reserved 1PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)Figure 1 The EFC application interfaceThe purpose of this part of ISO/TS 14907 is to

33、define tests that assess OBU capabilities, assess OBU behaviour, serve as a guide for OBU conformance evaluation and type approval, achieve comparability between the results of the corresponding tests applied in different places at different times, and facilitate communications between parties.Where

34、as, this part of ISO/TS 14907 defines examples of test cases for DSRC and EFC functionality in Annex C, it does not intend to specify a complete test suite for a certain implementation. To compose a test suite for a specific EFC implementation, the test cases may have to be modified and new test cas

35、es may have to be defined and added in order for the conformance test to be complete. It can be useful to take into account the following considerations when defining a complete test suite small range: “exhaustive testing” of critical interoperability/compatibility features, large range: testing of

36、boundaries and random values, and composite types: testing of individual items in sequence or parallel.Figure 2 shows the overall procedure of conformance testing.2 ISO 2016 All rights reservedPD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)Figure 2 Conformance testing processFigure 3 gives a more d

37、etailed picture of the interface between the entity performing the conformance test and the supplier of the Device Under Test (DUT). By the EFC application specification, the implementation conformance statement proforma and the implementation extra information for testing proforma the supplier is r

38、equested to provide the DUT (OBU), containing the Implementation ISO 2016 All rights reserved 3PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)Under Test (IUT), as well as the documentation needed to perform the tests. More details on the content of the different documents are given in Clause 5 on O

39、BU and supporting information.NOTE 1 The Device Under Test contains the Implementation Under Test.Figure 3 Documentation DUT supplierIt is outside the scope of this part of ISO/TS 14907 to define tests that assess performance, robustness, and reliability of an implementation.NOTE 2 ISO/TS 14907-1 de

40、fines test procedures that are aimed at assessing performance, robustness and reliability of EFC equipment and systems.NOTE 3 The ISO/IEC 10373 series defines test methods for proximity, vicinity, integrated circuit(s) cards and related devices that may be relevant for OBUs that support such cards.A

41、nnex D provides an informative overview of Japanese OBE conformance tests that are based on the ISO/TS 14907 series, in order to illustrate how these can be applied in practice.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are ind

42、ispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.4 ISO 2016 All rights reservedPD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)ISO 14906:2011/Amd1:2015, Elect

43、ronic fee collection Application interface definition for dedicated short-range communicationEN 12834:2003, Road transport and traffic telematics Dedicated short-range communication (DSRC) DSRC application layer3 Terms and definitionsFor the purposes of this document, the following terms and definit

44、ions apply.3.1access credentialstrusted attestation or secure module that establishes the claimed identity of an object or applicationSOURCE: EN 15509:2014, 3.13.2attributeaddressable package of data consisting of a single data element or structured sequences of data elementSOURCE: ISO 17575-1:, 3.2

45、3.3authenticatordata, possibly encrypted, that is used for authenticationSOURCE: EN 15509:2014, 3.33.4channelinformation transfer pathSOURCE: ISO/IEC 7498-2:1989, 3.3.133.5elementDSRC directory containing application information in the form of attributesSOURCE: ISO 14906:2011, 3.11, modified3.6imple

46、mentation conformance statementstatement of capabilities and options that have been implemented defining to what extent it is compliant with a given specification3.7implementation conformance statement proformadocument, in the form of a questionnaire, which when completed for an implementation or sy

47、stem becomes an implementation conformance statement (ICS)SOURCE: ISO/IEC 9646-1:1994, 3.3.403.8implementation extra information for testingstatement containing all of the information related to the implementation under test (IUT) and its corresponding system under test (SUT) which will enable the t

48、esting laboratory to run an appropriate test suite against that IUTSOURCE: ISO/IEC 19015:2000, 3.20 ISO 2016 All rights reserved 5PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)3.9implementation extra information for testing proformadocument, in the form of a questionnaire, which when completed for

49、 an implementation under test (IUT) becomes an implementation extra information for testing (IXIT)SOURCE: ISO/IEC 9646-1:1994, 3.3.423.10on-board equipmentall required equipment on-board a vehicle for performing required EFC functions and communication services3.11on-board unitsingle electronic unit on-board a vehicle for performing specific EFC functions and for communication with external systemsNote 1 to entry: An OBU always includes, in this context, at least the support