EN ISO TR 20173-2009 en Welding - Grouping systems for materials - American materials《焊接 材料分组系统 美国材料》.pdf

《EN ISO TR 20173-2009 en Welding - Grouping systems for materials - American materials《焊接 材料分组系统 美国材料》.pdf》由会员分享，可在线阅读，更多相关《EN ISO TR 20173-2009 en Welding - Grouping systems for materials - American materials《焊接 材料分组系统 美国材料》.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、PD CEN ISO/TR20173:2009ICS 25.160.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWPUBLISHED DOCUMENTWelding Groupingsystems for materials American materials(ISO/TR 20173:2009)This Published Document was published under the authority of the Standards Policy and Strategy Commit

2、tee on 30Novemer 2009 BSI 2009ISBN 978 0 580 64120 6Amendments/corrigenda issued since publicationDate CommentsPD CEN ISO/TR 20173:2009National forewordThis Published Document is the UK implementation of CEN ISO/ TR 20173:2009. It supersedes PD CEN ISO/TR 20173:2005 which is withdrawn.The UK partici

3、pation in its preparation was entrusted to Technical Committee WEE/36, Qualification of welding personnel and welding procedures.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions

4、 of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN ISO/TR 20173 October 2009 ICS 25.160.20 Supersedes CEN ISO/TR 20173:2005English Version Weldin

5、g - Grouping systems for materials - American materials (ISO/TR 20173:2009) Soudage - Systmes de groupement des matriaux - Matriaux amricains (ISO/TR 20173:2009) Schweien - Werkstoffgruppeneinteilung - Amerikanische Werkstoffe (ISO/TR 20173:2009) This Technical Report was approved by CEN on 15 Septe

6、mber 2009. It has been drawn up by the Technical Committee CEN/TC 121. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth

7、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation

8、 in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TR 20173:2009: EPD CEN ISO/TR 20173:2009CEN ISO/TR 20173:2009 (E) 3 Foreword This document (CEN ISO/TR 20173:2009) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collabor

9、ation with Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent r

10、ights. This document supersedes CEN ISO/TR 20173:2005. Endorsement notice The text of ISO/TR 20173:2009 has been approved by CEN as a CEN ISO/TR 20173:2009 without any modification. PD CEN ISO/TR 20173:2009ISO/TR 20173:2009(E) ISO 2009 All rights reserved iiiContents Page Foreword iv 1 Scope . 1 2 A

11、merican grouping system for materials. 1 Bibliography . 58 PD CEN ISO/TR 20173:2009ISO/TR 20173:2009(E) iv ISO 2009 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing I

12、nternational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison

13、 with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of tech

14、nical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In exceptional ci

15、rcumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example), it may decide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report

16、is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for id

17、entifying any or all such patent rights. ISO/TR 20173 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. This second edition cancels and replaces the first edition (ISO/TR 20173:2005), which has

18、been technically revised. Requests for official interpretations of any aspect of this Technical Report should be directed to the Secretariat of ISO/TC 44/SC 10 via your national standards body. A complete listing of these bodies can be found at http:/www.iso.org. PD CEN ISO/TR 20173:2009TECHNICAL RE

19、PORT ISO/TR 20173:2009(E) ISO 2009 All rights reserved 1Welding Grouping systems for materials American materials 1 Scope This Technical Report provides an American grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608:20051. It may als

20、o apply for other purposes, such as heat treatment, forming, and non-destructive testing. Types of steels are listed in accordance with the grouping system of ISO/TR 15608:20051, Table 1. This Technical Report covers grouping systems for the following standardized materials: steel; aluminium and its

21、 alloys; nickel and its alloys; copper and its alloys; titanium and its alloys; zirconium and its alloys; cast irons. 2 American grouping system for materials See Tables 1 and 2. Table 1 American grouping system for ferrous material ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or MNo

22、. GroupNo. ISO/TR 15608:20051group Nominal composition AS 15 5-490 1 1.1 C AS 15 7-430 1 1.1 C AS 15 7-460 1 1.1 C AS 15 7-490 1 1.1 C A/SA 36 K02600 1 1 11.1 C-Mn-Si A/SA 36 K02600 1 1 11.1 C-Mn-Si A/SA 53 Type E, Gr. A K02504 1 1 11.1 C PD CEN ISO/TR 20173:2009ISO/TR 20173:2009(E) 2 ISO 2009 All r

23、ights reservedTable 1 (continued) ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or MNo. GroupNo. ISO/TR 15608:20051group Nominal composition A/SA 53 Type E, Gr. B K03005 1 1 11.1 C-Mn A/SA 53 Type F 1 1 11.1 C A/SA 53 Type S, Gr. A K02504 1 1 11.1 C A/SA 53 Type S, Gr. B K03005 1 1 11

24、.1 C-Mn A/SA 105 K03504 1 2 11.1 C A/SA 106 A K02501 1 1 1.1 C-Si A/SA 106 B K03006 1 1 11.1 C-Mn-Si A/SA 106 C K03501 1 2 11.1 C-Mn-Si A 108 1015 CW G10150 1 1 1.1 C A 108 1018 CW G10180 1 1 1.1 C A 108 1020 CW G10200 1 1 1.1 C A 108 8620 CW G86200 3 3 4.1 0.5Ni-0.5Cr-Mo A 131 A 1 1 1.1 C A 131 AH3

25、2 1 2 1.2 C-Mn-Si A 131 AH36 1 2 1.2 C-Mn-Si A 131 B 1 1 1.1 C-Mn-Si A 131 CS 1 1 1.1 C-Mn-Si A 131 D 1 1 1.1 C-Mn-Si A 131 DH32 1 2 1.2 C-Mn-Si A 131 DH36 1 2 1.2 C-Mn-Si A 131 DS 1 1 1.1 C-Mn-Si A 131 E 1 2 1.1 C-Mn-Si A 131 EH32 1 2 1.2 C-Mn-Si A 131 EH36 1 2 1.2 C-Mn-Si A/SA 134 SA283, Gr. A 1 1

26、 1.1 C A/SA 134 SA283, Gr. B 1 1 1.1 C A/SA 134 SA283, Gr. C K02401 1 1 1.1 C A/SA 134 SA283, Gr. D K02702 1 1 1.1 C A/SA 134 SA285, Gr. A K01700 1 1 1.1 C A/SA 134 SA285, Gr. B K02200 1 1 1.1 C A/SA 134 SA285, Gr. C K02801 1 1 11.1 C A/SA 135 A 1 1 1.1 C A/SA 135 B 1 1 11.1 C A 139 A 1 1 1.1 C A 13

27、9 B K03003 1 1 1.1 C PD CEN ISO/TR 20173:2009ISO/TR 20173:2009(E) ISO 2009 All rights reserved 3Table 1 (continued) ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or MNo. GroupNo. ISO/TR 15608:20051group Nominal composition A 139 C K03004 1 1 11.1 C A 139 D K03010 1 1 11.1 C A 139 E K0

28、3012 1 1 11.1 C A 167 Type 302B S30215 8 1 8.1 18Cr-8Ni-2Si A 167 Type 308 S30800 8 2 8.2 20Cr-10Ni A 167 Type 309 S30900 8 2 8.2 23Cr-12Ni A 167 Type 309S S30908 8 2 8.2 23Cr-12Ni A 167 Type 310 S31000 8 2 8.2 25Cr-20Ni A 167 Type 310S S31008 8 2 8.2 25Cr-20Ni A/SA 178 A K01200 1 1 1.1 C A/SA 178 C

29、 K03503 1 1 11.1 C A/SA 178 D 1 2 11.1 C-Mn-Si A/SA 179 K01200 1 1 1.1 C A/SA 181 Cl. 60 K03502 1 1 11.1 C-Si A/SA 181 Cl. 70 K03502 1 2 11.1 C-Si A 182 F60 S32205 10H 1 10.1 22Cr-5Ni-3Mo-N A 182 F6a, Cl. 3 S41000 6 3 7.2 13Cr A 182 F6a, Cl. 4 S41000 6 3 7.2 13Cr A 182 S34565 S34565 8 4 8.2 24Cr-17N

30、i-6Mn-4.5Mo-N A/SA 182 F1 K12822 3 2 1.1 C-0.5Mo A/SA 182 F10 S33100 8 2 8.1 20Ni-8Cr A/SA 182 F11, Cl. 1 K11597 4 1 5.1 1.25Cr-0.5Mo-Si A/SA 182 F11, Cl. 2 K11572 4 1 5.1 1.25Cr-0.5Mo-Si A/SA 182 F11, Cl. 3 K11572 4 1 5.1 1.25Cr-0.5Mo-Si A/SA 182 F12, Cl. 1 K11562 4 1 5.1 1Cr-0.5Mo A/SA 182 F12, Cl

31、. 2 K11564 4 1 5.1 1Cr-0.5Mo A/SA 182 F2 K12122 3 2 4.2 0.5Cr-0.5Mo A/SA 182 F21 K31545 5 1 5.2 3Cr-1Mo A/SA 182 F22, Cl. 1 K21590 5 1 5.2 2.25Cr-1Mo A/SA 182 F22, Cl. 3 K21590 5 1 5.2 2.25Cr-1Mo A/SA 182 F22V K31835 5C 1 6.2 2.25Cr-1Mo-V A/SA 182 F304 S30400 8 1 8.1 18Cr-8Ni A/SA 182 F304H S30409 8

32、 1 8.1 18Cr-8Ni A/SA 182 F304L S30403 8 1 8.1 18Cr-8Ni A/SA 182 F304LN S30453 8 1 8.1 18Cr-8Ni-N PD CEN ISO/TR 20173:2009ISO/TR 20173:2009(E) 4 ISO 2009 All rights reservedTable 1 (continued) ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or MNo. GroupNo. ISO/TR 15608:20051group Nomina

33、l composition A/SA 182 F304N S30451 8 1 8.1 18Cr-8Ni-N A/SA 182 F310 S31000 8 2 8.2 25Cr-20Ni A/SA 182 F310MoLN S31050 8 2 8.2 25Cr-22Ni-2Mo-N A/SA 182 F316 S31600 8 1 8.1 16Cr-12Ni-2Mo A/SA 182 F316H S31609 8 1 8.1 16Cr-12Ni-2Mo A/SA 182 F316L S31603 8 1 8.1 16Cr-12Ni-2Mo A/SA 182 F316LN S31653 8 1

34、 8.1 16Cr-12Ni-2Mo-N A/SA 182 F316N S31651 8 1 8.1 16Cr-12Ni-2Mo-N A/SA 182 F317 S31700 8 1 8.1 18Cr-13Ni-3Mo A/SA 182 F317L S31703 8 1 8.1 18Cr-13Ni-3Mo A/SA 182 F321 S32100 8 1 8.1 18Cr-10Ni-Ti A/SA 182 F321H S32109 8 1 8.1 18Cr-10Ni-Ti A/SA 182 F347 S34700 8 1 8.1 18Cr-10Ni-Cb A/SA 182 F347H S347

35、09 8 1 8.1 18Cr-10Ni-Cb A/SA 182 F348 S34800 8 1 8.1 18Cr-10Ni-Cb A/SA 182 F348H S34809 8 1 8.1 18Cr-10Ni-Cb A/SA 182 F3V K31830 5C 1 6.2 3Cr-1Mo-V-Ti-B A/SA 182 F3VCb 5C 1 6.2 3Cr-1Mo-0.25V-Cb-Ca A/SA 182 F429 S42900 6 2 7.2 15Cr A/SA 182 F430 S43000 7 2 7.1 17Cr A/SA 182 F44 S31254 8 4 8.2 20Cr-18

36、Ni-6Mo A/SA 182 F45 S30815 8 2 8.2 21Cr-11Ni-N A/SA 182 F46 S30600 8 1 8.1 18Cr-15Ni-4Si A/SA 182 F5 K41545 5B 1 5.3 5Cr-0.5Mo A/SA 182 F50 S31200 10H 1 10.2 25Cr-6Ni-Mo-N A/SA 182 F51 S31803 10H 1 10.1 22Cr-5Ni-3Mo-N A/SA 182 F53 S32750 10H 1 10.2 25Cr-7Ni-4Mo-N A/SA 182 F54 S39274 10H 1 10.2 25Cr-

37、7Ni-3Mo-2W-Cu-N A/SA 182 F55 S32760 10H 1 10.1 25Cr-8Ni-3Mo-W-Cu-N A/SA 182 F5a K42544 5B 1 5.3 5Cr-0.5Mo A/SA 182 F6a, Cl. 1 S41000 6 1 7.2 13Cr A/SA 182 F6a, Cl. 2 S41000 6 3 7.2 13Cr A/SA 182 F6b S41026 6 3 7.2 13Cr-0.5Mo A/SA 182 F6NM S41500 6 4 7.2 13Cr-4.5Ni-Mo PD CEN ISO/TR 20173:2009ISO/TR 2

38、0173:2009(E) ISO 2009 All rights reserved 5Table 1 (continued) ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or MNo. GroupNo. ISO/TR 15608:20051group Nominal composition A/SA 182 F9 K90941 5B 1 5.4 9Cr-1Mo A/SA 182 F91 K90901 5B 2 6.4 9Cr-1Mo-V A/SA 182 FR K22035 9A 1 9.1 2Ni-1Cu A/SA

39、 182 FXM-11 S21904 8 3 8.3 21Cr-6Ni-9Mn A/SA 182 FXM-19 S20910 8 3 8.3 22Cr-13Ni-5Mn A/SA 182 FXM-27Cb S44627 10I 1 7.1 27Cr-1Mo A/SA 192 K01201 1 1 1.1 C-Si A/SA 202 A K11742 4 1 4.2 0.5Cr-1.25Mn-Si A/SA 202 B K12542 4 1 4.2 0.5Cr-1.25Mn-Si A/SA 203 A K21703 9A 1 9.1 2.5Ni A/SA 203 B K22103 9A 1 9.

40、1 2.5Ni A/SA 203 D K31718 9B 1 9.2 3.5Ni A/SA 203 E K32018 9B 1 9.2 3.5Ni A/SA 203 F 9B 1 9.2 3.5Ni A/SA 204 A K11820 3 1 1.1 C-0.5Mo A/SA 204 B K12020 3 2 1.1 C-0.5Mo A/SA 204 C K12320 3 2 1.2 C-0.5Mo A/SA 209 T1 K11522 3 1 1.1 C-0.5Mo A/SA 209 T1a K12023 3 1 1.1 C-0.5Mo A/SA 209 T1b K11422 3 1 1.1

41、 C-0.5Mo A/SA 210 A-1 K02707 1 1 11.1 C-Si A/SA 210 C K03501 1 2 11.1 C-Mn-Si A 211 A570-30 K02502 1 1 1.1 C A 211 A570-33 K02502 1 1 1.1 C A 211 A570-40 K02502 1 1 1.1 C A/SA 213 S31277 45 8.2 27Ni-22Cr-7Mo-Mn-Cu A/SA 213 S30600 S30600 8 1 8.1 17Cr-14Ni-4Si A/SA 213 S30601 S30601 8 1 8.1 17.5Cr-17.

42、5Ni-5.3Si A/SA 213 S30815 S30815 8 2 8.2 21Cr-11Ni-N A/SA 213 S31277 S31277 45 8.2 27Ni-22Cr-7Mo-Mn-Cu A/SA 213 S31725 S31725 8 4 8.1 19Cr-15Ni-4Mo A/SA 213 S31726 S31726 8 4 8.1 19Cr-15.5Ni-4Mo A/SA 213 S32615 S32615 8 1 8.1 18Cr-20Ni-5.5Si A/SA 213 T11 K11597 4 1 5.1 1.25Cr-0.5Mo-Si PD CEN ISO/TR

43、20173:2009ISO/TR 20173:2009(E) 6 ISO 2009 All rights reservedTable 1 (continued) ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or MNo. GroupNo. ISO/TR 15608:20051group Nominal composition A/SA 213 T12 K11562 4 1 5.1 1Cr-0.5Mo A/SA 213 T17 K12047 10B 1 4.1 1Cr-V A/SA 213 T2 K11547 3 1

44、4.2 0.5Cr-0.5Mo A/SA 213 T21 K31545 5A 1 5.2 3Cr-1Mo A/SA 213 T22 K21590 5A 1 5.2 2.25Cr-1Mo A/SA 213 T5 K41545 5B 1 5.3 5Cr-0.5Mo A/SA 213 T5b K51545 5B 1 5.3 5Cr-0.5Mo-Si A/SA 213 T5c K41245 5B 1 5.3 5Cr-0.5Mo-Ti A/SA 213 T9 K90941 5B 1 5.4 9Cr-1Mo A/SA 213 T91 K90901 5B 2 6.4 9Cr-1Mo-V A/SA 213 T

45、P201 S20100 8 3 8.3 17Cr-4Ni-6Mn A/SA 213 TP202 S20200 8 3 8.3 18Cr-5Ni-9Mn A/SA 213 TP304 S30400 8 1 8.1 18Cr-8Ni A/SA 213 TP304H S30409 8 1 8.1 18Cr-8Ni A/SA 213 TP304L S30403 8 1 8.1 18Cr-8Ni A/SA 213 TP304LN S30453 8 1 8.1 18Cr-8Ni-N A/SA 213 TP304N S30451 8 1 8.1 18Cr-8Ni-N A/SA 213 TP309Cb S30

46、940 8 2 8.2 23Cr-12Ni-Cb A/SA 213 TP309H S30909 8 2 8.2 23Cr-12Ni A/SA 213 TP309HCb S30941 8 2 8.2 23Cr-12Ni-Cb A/SA 213 TP309S S30908 8 2 8.2 23Cr-12Ni A/SA 213 TP310Cb S31040 8 2 8.2 25Cr-20Ni-Cb A/SA 213 TP310H S31009 8 2 8.2 25Cr-20Ni A/SA 213 TP310HCb S31041 8 2 8.2 25Cr-20Ni-Cb A/SA 213 TP310M

47、oLN S31050 8 2 8.2 25Cr-22Ni-2Mo-N A/SA 213 TP310MoLN S31050 8 2 8.2 25Cr-22Ni-2Mo-N A/SA 213 TP310S S31008 8 2 8.2 25Cr-20Ni A/SA 213 TP316 S31600 8 1 8.1 16Cr-12Ni-2Mo A/SA 213 TP316H S31609 8 1 8.1 16Cr-12Ni-2Mo A/SA 213 TP316L S31603 8 1 8.1 16Cr-12Ni-2Mo A/SA 213 TP316LN S31653 8 1 8.1 16Cr-12N

48、i-2Mo-N A/SA 213 TP316N S31651 8 1 8.1 16Cr-12Ni-2Mo-N A/SA 213 TP321 S32100 8 1 8.1 18Cr-10Ni-Ti A/SA 213 TP321H S32109 8 1 8.1 18Cr-10Ni-Ti PD CEN ISO/TR 20173:2009ISO/TR 20173:2009(E) ISO 2009 All rights reserved 7Table 1 (continued) ASTM/ASME ASME/AWS Specification No. Type or grade UNS No. P or

49、 MNo. GroupNo. ISO/TR 15608:20051group Nominal composition A/SA 213 TP347 S34700 8 1 8.1 18Cr-10Ni-Cb A/SA 213 TP347H S34709 8 1 8.1 18Cr-10Ni-Cb A/SA 213 TP347HFG S34710 8 1 8.1 18Cr-10Ni-Cb A/SA 213 TP348 S34800 8 1 8.1 18Cr-10Ni-Cb A/SA 213 TP348H S34809 8 1 8.1 18Cr-10Ni-Cb A/SA 213 XM-15 S38100 8 1 8.1 18Cr-18Ni-2Si A/SA 213 XM-19 S20910 8 3 8.3 22Cr-13Ni-5Mn A/SA 214 K01807 1 1 1.1 C A/SA 216 WCA J02502 1 1 1.1 C-Si A/SA