EN ISO 28017-2011 9375 Rubber hoses and hose assemblies wire or textile reinforced for dredging applications - Specification (ISO 28017 2011)《清淤应用橡胶管和软组件 线材和织物加固 规范》.pdf

《EN ISO 28017-2011 9375 Rubber hoses and hose assemblies wire or textile reinforced for dredging applications - Specification (ISO 28017 2011)《清淤应用橡胶管和软组件 线材和织物加固 规范》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 28017-2011 9375 Rubber hoses and hose assemblies wire or textile reinforced for dredging applications - Specification (ISO 28017 2011)《清淤应用橡胶管和软组件 线材和织物加固 规范》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 28017:2011Rubber hoses and hoseassemblies, wire or textilereinforced, for dredgingapplications Specification(ISO 28017:2011)Copyright European Committee for Standardiza

2、tion Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28017:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO28017:2011. It supersedes BS ISO 28017:2009 which is withdrawn.T

3、he UK participation in its preparation was entrusted to TechnicalCommittee PRI/66/-/1, Rubber and plastics tubing, hoses and hoseassemblies - Industrial, chemical and petrochemical applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publ

4、ication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 69767 8ICS 47.060; 83.140.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published unde

5、r the authority of theStandards Policy and Strategy Committee on 31 December 2011.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS

6、-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 28017 November 2011 ICS 83.140.40 English Version Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) Tuyaux et flexibles en caoutchouc, armature textile ou mtallique, p

7、our des applications de dragage - Spcifications (ISO 28017:2011) Gummischluche und Schlauchleitungen, Draht- oder Textilverstrkt, fr Nassbaggeranwendungen - Anforderung (ISO 28017:2011) This European Standard was approved by CEN on 14 November 2011. CEN members are bound to comply with the CEN/CENEL

8、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or

9、 to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offi

10、cial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slo

11、vakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwid

12、e for CEN national Members. Ref. No. EN ISO 28017:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28017:2011EN ISO 28017:2011 (E) 3 Foreword This document (EN IS

13、O 28017:2011) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products“ in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the secretariat of which is held by BSI. This European Standard shall be given the status of a national s

14、tandard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

15、 and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,

16、Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 28017:

17、2011 has been approved by CEN as a EN ISO 28017:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28017:2011ISO 28017:2011(E) ISO 2011 All

18、rights reserved iiiContents PageForeword iv1 Scope 12 Normative references .13 Terms and definitions .24 Classification 24.1 Classes .24.2 Grades 25 Materials and construction .35.1 Hoses 35.2 Flotation material .45.3 End fittings and end connections .46 Dimension and tolerances 46.1 Diameters .46.2

19、 Hose assembly length 47 Physical properties .57.1 Rubber compounds 57.2 Performance requirements .67.3 Frequency of testing .98 Test certificate or report 109 Marking .1010 Recommendations for packaging and storage .10Annex A (normative) Type tests and routine tests 11Annex B (normative) Measuremen

20、t of adhesion between end fitting and lining 12Annex C (normative) Hose assembly tensile-strength test 15Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28017:2011Forew

21、ordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technic

22、al committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of el

23、ectrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the

24、 member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for ident

25、ifying any or all such patent rights.ISO 28017 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Hoses (rubber and plastics).This second edition cancels and replaces the first edition (ISO 28017:2009), which has been technically revised. The main changes a

26、re the following: 5.1: minimum lining thicknesses have been specified for hoses of different nominal sizes; 5.2: additional requirements have been specified for flotation materials; Clause 6: tighter tolerances have been specified for the inside diameters of all nominal sizes; 7.1.2: requirements ha

27、ve been included for the tear strength of the hose lining; 7.1.3: requirements have been included for the rebound resilience properties of the hose lining; 7.2.5: the requirements concerning minimum reserve buoyancy have been made clearer; 7.2.6: the flotation material recovery test procedure has be

28、en made clearer; 7.2.9: requirements have been included for the minimum tensile strength of empty hose assemblies; 7.3: a more detailed description of type test requirements has been given; Annex A: a tear strength test and a rebound resilience test of the lining compound have been included, as well

29、 as a tensile-strength test on empty hose assemblies; a new annex (Annex C) specifying a tensile-strength test has been added.ISO 28017:2011(E)iv ISO 2011 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networ

30、king permitted without license from IHS-,-,-BS EN ISO 28017:2011INTERNATIONAL STANDARD ISO 28017:2011(E)Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications Specification1 ScopeThis International Standard specifies requirements for two types, seven classes and thre

31、e grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand, coral and small st

32、ones with a specific gravity in the range from 1,0 to 2,3 at ambient temperatures ranging from -10 C to +40 C.This International Standard covers two types of hose, as follows: type 1: floating type, for delivery only, which includes flotation material to give the hose buoyancy; type 2: submarine typ

33、e for delivery and suction.This International Standard does not specify requirements concerning the service life of hoses or hose assemblies. Specifying such requirements is the responsibility of the customer, in consultation with the hose manufacturer.2 Normative referencesThe following referenced

34、documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 34-1:2010, Rubber, vulcanized or thermoplastic Determination of tear st

35、rength Part 1: Trouser, angle and crescent test piecesISO 34-2:2011, Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test piecesISO 1402, Rubber and plastics hoses and hose assemblies Hydrostatic testingISO 1431-1, Rubber, vulcanized or thermoplastic Resistan

36、ce to ozone cracking Part 1: Static and dynamic strain testingISO 4649:2010, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum deviceISO 4662:2009, Rubber, vulcanized or thermoplastic Determination of rebound resilienceISO 4671, Rubber and pla

37、stics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assembliesISO 7233:2006, Rubber and plastics hoses and hose assemblies Determination of resistance to vacuumISO 8033, Rubber and plastics hoses Determination of adhesion between componentsISO 83

38、30, Rubber and plastics hoses and hose assemblies VocabularyISO 8331, Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenanceISO 10619-1, Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temper

39、ature ISO 2011 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28017:20113 Terms and definitionsFor the purposes of this document, the terms and de

40、finitions given in ISO 8330 apply.4 Classification4.1 ClassesSeven classes of hose are specified, distinguished by their maximum working pressure, of nominal sizes from 100 to 1 200, as shown in Table 1.Table 1 Classes and corresponding maximum working pressures and nominal sizesNominal sizeClass5 1

41、0 15 20 25 30 40Maximum working pressure, MWPbar5 10 15 20 25 30 40MPa0,5 1,0 1,5 2,0 2,5 3,0 4,0100 X X X X X X X150 X X X X X X X200 X X X X X X X250 X X X X X X N/A300 X X X X X X N/A350 X X X X X X N/A400 X X X X X X N/A450 X X X X X X N/A500 X X X X X X N/A550 X X X X X X N/A600 X X X X X X N/A

42、650 X X X X X X N/A700 X X X X X X N/A750 X X X X X X N/A800 X X X X X X N/A850 X X X X X X N/A900 X X X X X X N/A1 000 X X X X X X N/A1 100 X X X X X X N/A1 200 X X X X X N/A N/ANOTE X = Applicable, N/A = Not applicable.4.2 GradesType 2 hoses are classified into three grades, A, B and C, according

43、to their construction (number of reinforcing helical wires), as shown in Table 2.Type 1 hoses are not divided into grades.ISO 28017:2011(E)2 ISO 2011 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking

44、permitted without license from IHS-,-,-BS EN ISO 28017:2011Table 2 GradesType GradeConstruction and purposeNumber of reinforcing wires Purpose1 0 Delivery only2A 2 Delivery or suctionB 1 Delivery or suctionC 0 Delivery onlyThe types and grades available in each class (i.e. for each maximum working p

45、ressure) are as shown in Table 3.Table 3 Types and grades available in each classType GradeClass5 10 15 20 25 30 40Maximum working pressure, MWPbar5 10 15 20 25 30 40MPa0,5 1,0 1,5 2,0 2,5 3,0 4,01 X X X X X X X2A X X X N/A N/A N/A N/AB X X X N/A N/A N/A N/AC X X X X X X XNOTE X = Applicable, N/A =

46、Not applicable.5 Materials and construction5.1 HosesType 1 hose assemblies shall consist of an abrasion-resistant rubber lining, one or more layers of steel or textile reinforcement, a textile-reinforced rubber undercover, a flexible closed-cell flotation material integrally fitted round the hose bo

47、dy as described in 5.2, an abrasion- and weather-resistant rubber or thermoplastic outer cover (which, in the case of a rubber cover, may include one or two textile breaker layers), and end fittings as described in 5.3 on both ends.Type 2 hose assemblies shall consist of an abrasion-resistant rubber

48、 lining, one or more layers of steel or textile reinforcement, a textile-reinforced rubber, full rubber or thermoplastic cover at least 6 mm thick for hoses of nominal size less than 500, at least 10 mm thick for hoses of nominal size in the range from 500 to 850 inclusive and at least 12 mm thick for hoses of nominal size in the range from 900 to 1 200 inclusive, and end fittings as described in 5.3 on both ends. The lining thickness shall be at least 8 mm for nominal sizes up to and including 200, at least 10 mm for nominal sizes 250 to 500 inclusive, at least 12 mm