EN ISO 25649-7-2017 en Floating leisure articles for use on and in the water - Part 7 Additional specific safety requirements and test methods for class E devices.pdf

《EN ISO 25649-7-2017 en Floating leisure articles for use on and in the water - Part 7 Additional specific safety requirements and test methods for class E devices.pdf》由会员分享，可在线阅读，更多相关《EN ISO 25649-7-2017 en Floating leisure articles for use on and in the water - Part 7 Additional specific safety requirements and test methods for class E devices.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、Floating leisure articles for use on and in the waterPart 7: Additional specific safety requirements and test methods for Class E devices (ISO 25469-7:2017)BS EN ISO 25649-7:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPIS

2、CHE NORM EN ISO 25649-7 October 2017 ICS 97.220.40 Supersedes EN 15649-7:2009English Version Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25469-7:2017) Articles de loisirs flottants utiliser sur ou d

3、ans leau - Partie 7: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe E (ISO 25469-7:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 7: Teil 7: Zustzliche besondere sicherheitstechnische Anforderungen und Prfverfahren fr Artikel der Klass

4、e E (ISO 25469-7:2017) This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

5、 bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r

6、esponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

7、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUR

8、OPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25649-7:2017 ENational forewordThis British Standard is

9、the UK implementation of EN ISO 25649-7:2017. It is identical to ISO 25649-7:2017. It supersedes BS EN 15649-7:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on t

10、his committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88120 6IC

11、S 97.200.50; 97.220.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STA

12、NDARDBS EN ISO 256497:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 25649-7 October 2017 ICS 97.220.40 Supersedes EN 15649-7:2009English Version Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices

13、 (ISO 25469-7:2017) Articles de loisirs flottants utiliser sur ou dans leau - Partie 7: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe E (ISO 25469-7:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 7: Teil 7: Zustzliche besondere sicher

14、heitstechnische Anforderungen und Prfverfahren fr Artikel der Klasse E (ISO 25469-7:2017) This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

15、of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Germa

16、n). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,

17、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a

18、nd United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

19、No. EN ISO 25649-7:2017 EBS EN ISO 256497:2017EN ISO 25649-7:2017 (E) 3 European foreword This document (EN ISO 25649-7:2017) has been prepared by Technical Committee ISO/TC 83 “Sports and other recreational facilities and equipment” in collaboration with Technical Committee CEN/TC 136 “Sports, play

20、ground and other recreational facilities and equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standards shal

21、l be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15649-7:2009. This document h

22、as been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgar

23、ia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerla

24、nd, Turkey and the United Kingdom. Endorsement notice The text of ISO 25649-7:2017 has been approved by CEN as EN ISO 25649-7:2017 without any modification. ISO 25649-7:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Materials . 35 Construction and fun

25、ctional components of boats . 35.1 Conditioning 35.2 Hull integrity . 35.2.1 Requirements . 35.2.2 Test method 35.3 Manual lifting and carrying devices 45.3.1 Requirements . 45.3.2 Test method 45.4 Rowlocks and oars . 45.4.1 Requirements . 45.4.2 Test methods . 45.5 Hull drainage 55.6 Towing device

26、55.7 Seating and attachment systems (where offered as standard or optional equipment). 56 Safety requirements and test methods . 56.1 Minimum area and maximum permissible number of persons . 56.1.1 Requirement 56.1.2 Testing . 56.2 Static stability of the boat 66.2.1 Requirement 66.2.2 Test method 6

27、6.3 Dimensional stability when getting on and off the boat . 76.3.1 Requirement 76.3.2 Testing . 86.4 Maximum load capacity 86.4.1 Requirement 86.4.2 Testing . 86.5 Safety ropes and grab handles . 86.5.1 Requirement 86.5.2 Test method 86.6 Residual buoyancy specific for boats . 96.6.1 Requirement 96

28、.6.2 Test method 96.7 Manoeuvrability . 96.7.1 Requirement 96.7.2 Test method 97 Performance requirements and test methods for boats . 97.1 General . 97.2 Strength and performance of the towing device for boats 97.2.1 Requirement 97.2.2 Test method 97.3 Rowing test (where applicable, see 5.4) 107.4

29、Water tightness test for boats . 107.4.1 Requirement .107.4.2 Test method . 10 ISO 2017 All rights reserved iiiContents PageBS EN ISO 256497:2017ISO 25649-7:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Materials . 35 Construction and functional comp

30、onents of boats . 35.1 Conditioning 35.2 Hull integrity . 35.2.1 Requirements . 35.2.2 Test method 35.3 Manual lifting and carrying devices 45.3.1 Requirements . 45.3.2 Test method 45.4 Rowlocks and oars . 45.4.1 Requirements . 45.4.2 Test methods . 45.5 Hull drainage 55.6 Towing device 55.7 Seating

31、 and attachment systems (where offered as standard or optional equipment). 56 Safety requirements and test methods . 56.1 Minimum area and maximum permissible number of persons . 56.1.1 Requirement 56.1.2 Testing . 56.2 Static stability of the boat 66.2.1 Requirement 66.2.2 Test method 66.3 Dimensio

32、nal stability when getting on and off the boat . 76.3.1 Requirement 76.3.2 Testing . 86.4 Maximum load capacity 86.4.1 Requirement 86.4.2 Testing . 86.5 Safety ropes and grab handles . 86.5.1 Requirement 86.5.2 Test method 86.6 Residual buoyancy specific for boats . 96.6.1 Requirement 96.6.2 Test me

33、thod 96.7 Manoeuvrability . 96.7.1 Requirement 96.7.2 Test method 97 Performance requirements and test methods for boats . 97.1 General . 97.2 Strength and performance of the towing device for boats 97.2.1 Requirement 97.2.2 Test method 97.3 Rowing test (where applicable, see 5.4) 107.4 Water tightn

34、ess test for boats . 107.4.1 Requirement .107.4.2 Test method . 10 ISO 2017 All rights reserved iiiContents PageBS EN ISO 256497:2017ISO 25649-7:2017(E)8 Standard equipment and accessories for boats 108.1 Requirement 108.2 Testing . 109 Marking .1010 Instructions for use for boats .1011 Exclusions .

35、12Annex A (normative) Inflatable canoes, kayaks and sit-on-top kayaks 13Annex B (normative) Inflatable boat propelled by sail or motor 15Annex C (informative) General arrangement of a typical boat with the hull made of non-reinforced material .21Annex D (informative) General arrangement of a typical

36、 boat with the hull made of reinforced material .22Annex E (informative) General arrangement of a typical paddle boat/kayak .23Annex F (informative) Examples of typical products forming Class E 24Bibliography .25iv ISO 2017 All rights reservedBS EN ISO 256497:2017ISO 25649-7:2017(E)8 Standard equipm

37、ent and accessories for boats 108.1 Requirement 108.2 Testing . 109 Marking .1010 Instructions for use for boats .1011 Exclusions .12Annex A (normative) Inflatable canoes, kayaks and sit-on-top kayaks 13Annex B (normative) Inflatable boat propelled by sail or motor 15Annex C (informative) General ar

38、rangement of a typical boat with the hull made of non-reinforced material .21Annex D (informative) General arrangement of a typical boat with the hull made of reinforced material .22Annex E (informative) General arrangement of a typical paddle boat/kayak .23Annex F (informative) Examples of typical

39、products forming Class E 24Bibliography .25iv ISO 2017 All rights reserved ISO 25649-7:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried

40、 out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

41、 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different a

42、pproval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be th

43、e subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any

44、 trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs ad

45、herence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 25649-7 was prepared by the European Committee Standardization (CEN) Technical Committee CEN/TC 136, Sports, playground and other recreational fa

46、cilities and equipment, in collaboration with ISO Technical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all the parts in the ISO 25649-series can be found on the IS

47、O website. ISO 2017 All rights reserved vBS EN ISO 256497:2017ISO 25649-7:2017(E)IntroductionThis document is closing the regulatory gab between aquatic toys smaller than 1,2 m on the one hand and inflatable boats providing a buoyancy greater than 1 800 N on the other hand. It includes all kinds of

48、boat propulsion and covers canoes and kayaks as well. The mostly combined safety and performance requirements deal with space per person, load capacity, floating stability, engine power and behaviour after loss of air pressure (failure of an air chamber).Practical test runs shall prove the manoeuvra

49、bility of the boat under various conditions and the adequate motorization.Comprehensive consumer information related to selection before purchase and during use complete the requirement profile of the document.This document covers boats of customary construction and design with an overall length from 1,2 m (uninflated, flat) up to 1 800 N buoyancy. Such boats are mostly intended for recreational water activities and for the use by children. However, smaller tender boats such as those used on yachts also fall within this size rang