EN ISO 23537-1-2016 en Requirements for sleeping bags - Part 1 Thermal and dimensional requirements (Incorporates Amendment A1 2018)《睡袋-第1部分 热要求和尺寸要求(ISO 23537-1 2016)》.pdf

《EN ISO 23537-1-2016 en Requirements for sleeping bags - Part 1 Thermal and dimensional requirements (Incorporates Amendment A1 2018)《睡袋-第1部分 热要求和尺寸要求(ISO 23537-1 2016)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 23537-1-2016 en Requirements for sleeping bags - Part 1 Thermal and dimensional requirements (Incorporates Amendment A1 2018)《睡袋-第1部分 热要求和尺寸要求(ISO 23537-1 2016)》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 23537-1:2016Requirements for sleeping bags Part 1: Thermal and dimensional requirements (ISO 23537-1:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 23537-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation

2、of EN ISO 23537-1:2016. It is identical to ISO 23537-1:2016. Together with BS EN ISO 23537-2:2016, it supersedes BS EN 13537:2012 which is withdrawn.BSI, as a member of CEN, is obliged to publish EN ISO 23537-1 as a British Standard. However, attention is drawn to the fact that during the developmen

3、t of this European Standard, the UK committee voted against its approval as a European Standard.It is the opinion of the UK committee that the variability and repeatability of the thermal test was not correctly verified following agreed test procedure modifications during the development of this sta

4、ndard: e.g. by application of a round robin testing process. In addition the calibration of thermal manikins is still in question, which could add variability to the test procedure.The UK participation in its preparation was entrusted by Technical Committee SW/136, Sports, playground and other recre

5、ational equipment, to Subcommittee SW/136/11, Sleeping bags and tents.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap

6、plication. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 90410 3ICS 97.200.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy C

7、ommittee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 23537-1 October 2016 ICS 97.200.30 Supersedes EN 13537:2012English Version Requirements for sleeping bags - Part 1: Thermal and dimensional requirement

8、s (ISO 23537-1:2016) Exigences pour les sacs de couchage - Partie 1: Exigences thermiques et dimensionnelles (ISO 23537-1:2016) Anforderungen an Schlafscke - Teil 1: Thermische Anforderungen und Abmessungen (ISO 23537-1:2016)This European Standard was approved by CEN on 5 September 2016. CEN members

9、 are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

10、to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

11、 Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

12、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B

13、-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 23537-1:2016 EBS EN ISO 23537-1:2016EN ISO 23537-1:2016 (E) 3 European foreword This document (EN ISO 23537-1:2016) has been prepared by Technical Committee IS

14、O/TC 83 “Sports and other recreational facilities and equipment“ in collaboration with Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard,

15、 either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and

16、/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13537:2012. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

17、Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw

18、itzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 23537-1:2016 has been approved by CEN as EN ISO 23537-1:2016 without any modification. BS EN ISO 23537-1:2016ISO 23537-1:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Requir

19、ements and test methods 34.1 Water vapour permeability index . 34.2 Inside dimensions 34.2.1 Inside length 34.2.2 Maximum inside width . 34.2.3 Inside foot width 34.3 Total mass 34.4 Thermal properties . 34.4.1 Principle 34.4.2 Thermal manikin . 44.4.3 Climatic room . 44.4.4 Thermal resistance 44.4.

20、5 Artificial ground . 54.4.6 Test samples and pre-treatment 54.4.7 Test procedure . 54.4.8 Calculation of temperatures of the range of utility 54.4.9 Calibration of thermal manikin . 75 Test report . 76 Labelling 86.1 Graph for the range of utility 86.2 Marking . 86.3 Information supplied to the con

21、sumer 9Annex A (normative) Reference values of thermal resistance for calibration 11Annex B (informative) Precision of test results .13Annex C (normative) Physiological model for calculation of range of utility .14Annex D (informative) Warning of misuse of temperature rating 19Annex E (informative)

22、Rationale .20 ISO 2016 All rights reserved iiiContents PageBS EN ISO 23537-1:2016ISO 23537-1:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally c

23、arried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the wor

24、k. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the diffe

25、rent approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may

26、 be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patent

27、s).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Or

28、ganization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 23537 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment in c

29、ollaboration with ISO Technical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).ISO 23537 consists of the following parts, under the general title, Requirements for sleeping bags

30、: Part 1: Thermal and dimensional requirements Part 2: Fabric and material propertiesiv ISO 2016 All rights reservedBS EN ISO 23537-1:2016ISO 23537-1:2016(E)IntroductionThis is the first edition of this part of ISO 23537. It is based on continued development of the European Standard, EN 13537.This I

31、nternational Standard consists of two parts which allows for separate validation of thermal properties and product and material performance. This separation of parts also allows for continued development of new product combinations as it encourages manufacturers to consider new combinations of mater

32、ials which for example might not be suitable to test by traditional textile physical tests, but which can still have thermal properties evaluated.This part of ISO 23537 considers important aspects to the thermal performance of the sleeping bag.During the development of this part of ISO 23537, consid

33、eration was given to the need to continue to reduce inter laboratory variability of the thermal testing and a number of test parameters have been tightened as a consequence.Consideration has also been given to the definition of extreme climate zone which is now referred to as temperatures 10 % (vari

34、ation coefficient);c) global bias (i.e. mean value) on the complete set of the reference sleeping bags 5 % (variation coefficient).Additionally, the repeatability of the measurement on each sleeping bag shall be better than 4 % (variation coefficient).5 Test reportThe test report shall include at le

35、ast the following:a) reference and description of the sleeping bag sample;b) if only one sleeping bag was used for the 3 measurements (see 4.4.7), a note saying that only one sleeping bag was used;2) The reference sets of sleeping bags are available from: a) SWEREA IVF AB, Box 104, SE- 431 22 Mlndal

36、 (Sweden); b) Hohenstein Laboratories GmbH c) AITEX, Plaza Emilio Sala 1, E - 03801 Alcoy (Alicante) (Spain). This Information is given for the convenience of users of this document and does not constitute an endorsement by ISO of the sleeping bags named.Table 2 (continued) ISO 2016 All rights reser

37、ved 7BS EN ISO 23537-1:2016ISO 23537-1:2016(E)c) description of operating conditions, and especially:1) description of the thermal manikin, garments worn and artificial ground;2) ambient conditions in the climatic room (temperature, humidity, wind speed);d) results of the test (thermal resistance Rc

38、(1) and/or Rc(2) of the sleeping bag sample);e) calculated temperatures of the range of utility of the sleeping bag sample Text, Tlim, Tcomfand/or Tmax;f) a reference to this part of ISO 23537, i.e. ISO 23537-1: 2016;g) details of deviations from this part of ISO 23537, if applicable;h) date of test

39、.6 Labelling6.1 Graph for the range of utilityThe range of utility for the sleeping bag sample shall be given on the label for marking (see 6.2) in the form of a graph.The transition range shall be marked. The risk range shall also be marked and, simultaneously, the hazards existing in such environm

40、ental temperatures shall be pointed out. The comfort range may be marked.The ranges shown in the graph shall be termed “comfort range”, “transition range” and “risk range”. These terms shall be given below the respective range. At the temperature limits Tmax, Tcomf, Tlim, and Textthe respective valu

41、es shall be given in C.The graph including its given data shall be used in a linear form. An example is shown in Figure 1. The colouring and the scale of the graph can be designed freely.Key1 comfort range2 transition range3 risk rangeFigure 1 Example for a graph for the range of utilityBelow the gr

42、aph, a warning note shall be included with the following wording:“WARNING: In the risk range a strong sensation of cold has to be expected. There is a risk of health damage by hypothermia.”For a warning of misuse of temperature rating, see Annex D.6.2 MarkingAt least the following information shall

43、be permanently attached to the sleeping bag (e.g. by printing on the sleeping bag or by sewn-in labels):a) reference to this part of ISO 23537, i.e. ISO 23537-1;8 ISO 2016 All rights reservedBS EN ISO 23537-1:2016ISO 23537-1:2016(E)b) composition of the filling, shell fabric and lining;c) ranges of

44、utility (graph);d) care labelling, according to ISO 3758;e) name of the brand;f) name or reference number of the product.6.3 Information supplied to the consumerAt least the following information shall be supplied to the consumer together with the sleeping bag at the point of sale:a) inside length,

45、maximum inside width and foot width in centimetres in a graphical symbol (for an example, see Figure 2); ISO 2016 All rights reserved 9BS EN ISO 23537-1:2016ISO 23537-1:2016(E)Dimensions in centimetresa) rectangular sleeping bagb) mummy shaped sleeping bagKeyl inside lengthw1maximum inside widthw2in

46、side foot widthFigure 2 Graphical symbolsb) total mass of the sleeping bag:1) for sleeping bags of 1 000 g rounded to the nearest 10 g;2) for sleeping bags of 1 000 g rounded to the nearest 50 g;c) name and address of the brand;d) reference to this part of ISO 23537, i.e. ISO 23537-1;e) if only comp

47、liance to this part of ISO 23537 is claimed, a note saying that the indicated reference to part of ISO 23537 only covers the thermal requirements of the sleeping bag and not its fabric properties.10 ISO 2016 All rights reservedBS EN ISO 23537-1:2016ISO 23537-1:2016(E)Annex A (normative) Reference va

48、lues of thermal resistance for calibrationA.1 GeneralThe reference values for thermal resistances posture 1 Rc(1) and the thermal resistances posture 2 Rc(2) are those obtained with the thermal manikin “Charlie 3”3)operated in the specific conditions described in this Annex.A.2 Thermal manikinThe th

49、ermal manikin “Charlie 3” has a human shape with trunk, head with hair, mobile arms and legs, hands and feet. Its dimensions correspond to German standard garment size 50/52. Its mass is 44 kg. When laid within a sleeping bag, the manikin has his left arm folded over the chest, and his right arm lying alongside the torso.The body of the manikin is divided into 16 segments with independent surface temperature sensors and electric heating wires. The heating is monitored to maintain surface temperature of the corresponding segment at a constant value