EN ISO 23500-2015 en Guidance for the preparation and quality management of fluids for haemodialysis and related therapies《血液透析及相关治疗的流体制备与质量管理的指导(ISO 23500 2014)》.pdf

《EN ISO 23500-2015 en Guidance for the preparation and quality management of fluids for haemodialysis and related therapies《血液透析及相关治疗的流体制备与质量管理的指导(ISO 23500 2014)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 23500-2015 en Guidance for the preparation and quality management of fluids for haemodialysis and related therapies《血液透析及相关治疗的流体制备与质量管理的指导(ISO 23500 2014)》.pdf（96页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 23500:2015BS ISO 23500:2014Guidance for the preparationand quality management offluids for haemodialysis andrelated therapiesBS EN ISO 23500:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 23500:2015. It is identical t

2、o ISO 23500:2014. It supersedes BS ISO 23500:2014 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee CH/150, Implants for surgery, to Subcommittee CH/150/2, Cardiovascular implants.A list of organizations represented on this subcommittee can be obtained o

3、n request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 88237 1ICS 11.040.20; 11.040.40Complian

4、ce with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 This corrigendum renumbers BS

5、 ISO 23500:2014 as BS EN ISO 23500:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 23500 October 2015 ICS 11.040.40 English Version Guidance for the preparation and quality management of fluids for haemodialysis and related therapies (ISO 23500:2014) Directives concernant la prparation

6、et le management de la qualit des fluides dhmodialyse et de thrapies annexes (ISO 23500:2014) Leitfaden fr die Vorbereitung und das Qualittsmanagement von Konzentraten fr die Hmodialyse und verwandte Therapien (ISO 23500:2014) This European Standard was approved by CEN on 27 September 2015. CEN memb

7、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

8、on to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managem

9、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

10、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 1

11、7, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 23500:2015 EBS EN ISO 23500:2015EN ISO 23500:2015 (E)EN ISO 23500:2015 (E) 3 European foreword The text of ISO 23500:2014 has been prepared by Technical Co

12、mmittee ISO/TC 150 “Implants for surgery” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 23500:2015 by Technical Committee CEN/TC 205 “Non-active medical devices” the secretariat of which is held by DIN. This European Standard shall be given the status

13、of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be withdrawn at the latest by April 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of

14、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria

15、, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

16、 and the United Kingdom. Endorsement notice The text of ISO 23500:2014 has been approved by CEN as EN ISO 23500:2015 without any modification. ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 11.1 General . 11.2 Inclusions . 11.3 Exclusions 12 Normative references 13 T

17、erms and definitions . 24 Summary of quality requirements of ISO 13958, ISO 13959 and ISO 11663 94.1 Dialysis water . 94.2 Requirements for concentrate 114.3 Requirements for dialysis fluid 114.4 Record retention . 125 Critical aspects of system design 125.1 Technical aspects . 135.2 Microbiological

18、 aspects 136 Validation of system performance 146.1 Validation plan . 146.2 Installation and operational qualification 156.3 Performance qualification 166.4 Routine monitoring and revalidation .167 Quality management .177.1 General 177.2 Monitoring of fluid quality . 177.3 Monitoring of water treatm

19、ent equipment . 187.4 Monitoring of dialysis water storage and distribution 217.5 Monitoring of concentrate preparation 237.6 Monitoring of concentrate distribution 237.7 Monitoring of dialysis fluid proportioning 238 Strategies for microbiological control 248.1 General 248.2 Disinfection . 248.3 Mi

20、crobiological monitoring methods .269 Environment 2810 Personnel 29Annex A (informative) Rationale for the development and provisions of this International Standard .30Annex B (informative) Equipment .34Annex C (informative) Monitoring guidelines for water treatment equipment, distribution systems,

21、and dialysis fluid .52Annex D (informative) Strategies for microbiological control .57Annex E (informative) Validation 62Annex F (informative) Special considerations for home haemodialysis 65Annex G (informative) Special considerations for acute haemodialysis 71Bibliography .76BS EN ISO 23500:2015 I

22、SO 23500:2014 (E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subje

23、ct for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC

24、) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be no

25、ted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying

26、 any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of

27、 users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplem

28、entary informationThe committee responsible for this document is ISO/TC 150, Implants for surgery, Subcommittee SC 2, Cardiovascular implants and extracorporeal systems.This second edition cancels and replaces the first edition (ISO 23500:2011), which has been technically revised.iv ISO 2014 All rig

29、hts reservedBS EN ISO 23500:2015 ISO 23500:2014 (E)IntroductionThis International Standard was developed by ISO/TC 150/SC 2. The objective was to provide users with guidance for handling water and concentrates and for the production and monitoring of dialysis fluid used for haemodialysis. The need f

30、or such guidance is based on the critical role of dialysis fluid quality in providing safe and effective haemodialysis, and the recognition that day-to-day dialysis fluid quality is under the control of the healthcare professionals who deliver dialysis therapy.Quality requirements for the water and

31、concentrates used to prepare dialysis fluid, and for that dialysis fluid, are provided in ISO 13959, ISO 13958, and ISO 11663, respectively. This International Standard does not address clinical issues that might be associated with inappropriate usage of the water, dialysis water, concentrates, or d

32、ialysis fluid. Healthcare professionals involved in the provision of treatment for kidney failure should make the final decision regarding the applications with which these fluids are used, for example, haemodialysis, haemodiafiltration, high-flux haemodialysis, and the reprocessing of dialysers, an

33、d need to be aware of the issues that the use of inappropriate fluid quality raises in each of the therapies.The equipment used in the various stages of dialysis fluid preparation is generally obtained from specialized vendors. Dialysis practitioners are generally responsible for maintaining that eq

34、uipment following its installation. Therefore, this International Standard provides guidance on monitoring and maintenance of the equipment to ensure that dialysis fluid quality is acceptable at all times. At various places throughout this International Standard, the user is advised to follow the ma

35、nufacturers instructions regarding the operation and maintenance of equipment. In those instances in which the equipment is not obtained from a specialized vendor, it is the responsibility of the user to validate the performance of the equipment in the haemodialysis setting and to ensure that approp

36、riate operating and maintenance manuals are available. Annex B provides a general description of the system components that are used for water treatment, concentrate, and dialysis fluid preparation at a dialysis facility. These descriptions are intended to provide the user with a basis for understan

37、ding why certain equipment might be required and how it should be configured; they are not intended as detailed design standards. Requirements for water treatment equipment are provided in ISO 26722.The verbal forms used in this International Standard conform to usage described in Annex H of the ISO

38、/IEC Directives, Part 2:2004. For the purposes of this International standard, the auxiliary verb: “shall” means that compliance with a requirement or a test is mandatory for compliance with this International Standard; “should” means that compliance with a requirement or a test is recommended but i

39、s not mandatory for compliance with this International Standard; “may” is used to describe a permissible way to achieve compliance with a requirement or test.This International Standard reflects the conscientious efforts of healthcare professionals, patients, and medical device manufacturers to deve

40、lop recommendations for handling water and concentrates and for the production and monitoring of dialysis fluid for haemodialysis. This International Standard is directed towards the healthcare professionals involved in the management or routine care of haemodialysis patients and responsible for the

41、 quality of dialysis fluid. The recommendations contained in this International Standard might not be applicable in all circumstances and they are not intended for regulatory application.The guidance provided by this International Standard should help protect haemodialysis patients from adverse effe

42、cts arising from known chemical and microbial contaminants that might be found in improperly prepared dialysis fluid. However, the physician in charge of dialysis has the ultimate responsibility for ensuring that the dialysis fluid is correctly formulated and meets the requirements of all applicable

43、 quality standards.The concepts incorporated in this International Standard should not be considered inflexible or static. The recommendations presented here should be reviewed periodically in order to assimilate increased understanding of the role of dialysis fluid purity in patient outcomes and te

44、chnological developments. ISO 2014 All rights reserved vBS EN ISO 23500:2015 ISO 23500:2014 (E)BS EN ISO 23500:2015 ISO 23500:2014 (E)Guidance for the preparation and quality management of fluids for haemodialysis and related therapies1 Scope1.1 GeneralThis International Standard provides dialysis p

45、ractitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for use in online therapies, such as haemodiafiltration and haemofiltration. As such, this International Standard functions as a recommended practice.1.2 InclusionsThis Inte

46、rnational Standard addresses the users responsibility for the dialysis fluid once the equipment used in its preparation has been delivered and installed. For the purposes of this International Standard, the dialysis fluid includes dialysis water (see 3.18 for definition) used for the preparation of

47、dialysis fluid and substitution fluid, dialysis water used for the preparation of concentrates at the users facility, as well as concentrates and the final dialysis fluid and substitution fluid.The scope of this International Standard includesa) the quality management of equipment used to treat and

48、distribute water used for the preparationof dialysis fluid and substitution fluid, from the point at which municipal water enters the dialysisfacility to the point at which the final dialysis fluid enters the dialyser or the point at whichsubstitution fluid is infused,b) equipment used to prepare co

49、ncentrate from powder or other highly concentrated media at adialysis facility, andc) preparation of the final dialysis fluid or substitution fluid from dialysis water and concentrates.NOTE Because water used to prepare dialysis fluid is commonly prepared and distributed using the same equipment as the water used to reprocess dialysers, water used to reprocess dialysers is also covered by this International Standard.1.3 ExclusionsThis International Standard does not apply to sorbent-based dialysis fluid regeneration systems that regenerate and recirculate