EN ISO 16890-4-2016 en Air filters for general ventilation - Part 4 Conditioning method to determine the minimum fractional test efficiency《一般通风用空气过滤器第4部分 调理方法确定最低分数测试效率(ISO 16890-.pdf

《EN ISO 16890-4-2016 en Air filters for general ventilation - Part 4 Conditioning method to determine the minimum fractional test efficiency《一般通风用空气过滤器第4部分 调理方法确定最低分数测试效率(ISO 16890-.pdf》由会员分享，可在线阅读，更多相关《EN ISO 16890-4-2016 en Air filters for general ventilation - Part 4 Conditioning method to determine the minimum fractional test efficiency《一般通风用空气过滤器第4部分 调理方法确定最低分数测试效率(ISO 16890-.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 16890-4:2016Air filters for generalventilationPart 4: Conditioning method to determinethe minimum fractional test efficiency (ISO16890-4:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 16890-4:2016 BRITISH STANDARDNational forewordThis Britis

2、h Standard is the UK implementation of EN ISO 16890-4:2016. Together with BS EN ISO 16890-1:2016, BS EN ISO 16890-2:2016 and BS EN ISO 16890-3:2016 it supersedes BS EN 779:2012 and DD ISO/TS 21220:2009 which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee M

3、CE/21, Filters for gases and liquids.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Ins

4、titution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 80193 8 ICS 23.120; 91.140.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 201

5、6.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16890-4 December 2016 ICS 91.140.30 Supersedes EN 779:2012English Version Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fr

6、actional test efficiency (ISO 16890-4:2016) Filtres air de ventilation gnrale - Partie 4: Mthode de conditionnement afin de dterminer lefficacit spectrale minimum dessai (ISO 16890-4:2016) Luftfilter fr die allgemeine Raumlufttechnik - Teil 4: Konditionierungsverfahren fr die Ermittlung des Fraktion

7、sabscheidegradminimus (ISO 16890-4:2016)This European Standard was approved by CEN on 19 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration

8、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

9、ranslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

10、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZA

11、TION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16890-4:2016 EBS EN ISO 16890-4:2016EN ISO

12、 16890-4:2016 (E) 3 European foreword This document (EN ISO 16890-4:2016) has been prepared by Technical Committee ISO/TC 142 “Cleaning equipment for air and other gases“ in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning” the secretariat of which is held by U

13、NI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of

14、the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 779:2012. This document has been prepared under a mandate given to CEN by the European Commission and the Eur

15、opean Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

16、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16890-4:2016 has been

17、approved by CEN as EN ISO 16890-4:2016 without any modification. BS EN ISO 16890-4:2016ISO 16890-4:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and abbreviated terms . 25 General conditioning test requirements . 25.1 General . 25.2 Test devi

18、ce requirements . 25.3 Test device selection 25.4 Conditioning cabinet requirements 36 Conditioning materials 37 Conditioning cabinet 47.1 General . 47.2 Conditioning cabinet dimensions and construction materials . 47.3 Environment, temperature and relative humidity . 58 Safety issues 69 Test method

19、 . 69.1 General . 69.2 Conditioning procedure 710 Qualification 711 Reporting results . 8Annex A (informative) Hints for health and safety aspects for the use of IPA . 9Bibliography .11 ISO 2016 All rights reserved iiiContents PageBS EN ISO 16890-4:2016ISO 16890-4:2016(E)ForewordISO (the Internation

20、al Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been e

21、stablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standard

22、ization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance

23、with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of an

24、y patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement

25、.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The co

26、mmittee responsible for this document is ISO/TC 142, Cleaning equipment for air and other gases.This first edition of ISO 16890-4, together with ISO 16890-1, ISO 16890-2 and ISO 16890-3, cancels and replaces ISO/TS 21220:2009, which has been technically revised.ISO 16890 consists of the following pa

27、rts, under the general title Air filters for general ventilation: Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) Part 2: Measurement of fractional efficiency and air flow resistance Part 3: Determination of the gravimetric effi

28、ciency and the air flow resistance versus the mass of test dust captured Part 4: Conditioning method to determine the minimum fractional test efficiencyiv ISO 2016 All rights reservedBS EN ISO 16890-4:2016ISO 16890-4:2016(E)IntroductionThe effects of particulate matter (PM) on human health have been

29、 extensively studied in the past decades. The results are that fine dust can be a serious health hazard, contributing to or even causing respiratory and cardiovascular diseases. Different classes of particulate matter can be defined according to the particle size range. The most important ones are P

30、M10, PM2,5and PM1. The U.S. Environmental Protection Agency (EPA), the World Health Organization (WHO) and the European Union define PM10as particulate matter which passes through a size-selective inlet with a 50 % efficiency cut-off at 10 m aerodynamic diameter. PM2,5and PM1are similarly defined. H

31、owever, this definition is not precise if there is no further characterization of the sampling method and the sampling inlet with a clearly defined separation curve. In Europe, the reference method for the sampling and measurement of PM10is described in EN 12341. The measurement principle is based o

32、n the collection on a filter of the PM10fraction of ambient particulate matter and the gravimetric mass determination (see EU Council Directive 1999/30/EC of 22 April 1999).As the precise definition of PM10, PM2,5and PM1is quite complex and not simple to measure, public authorities, like the U.S. EP

33、A or the German Federal Environmental Agency (Umweltbundesamt), increasingly use in their publications the more simple denotation of PM10as being the particle size fraction less or equal to 10 m. Since this deviation to the above mentioned complex “official” definition does not have a significant im

34、pact on a filter elements particle removal efficiency, the ISO 16890 series refers to this simplified definition of PM10, PM2,5and PM1.Particulate matter in the context of the ISO 16890 series describes a size fraction of the natural aerosol (liquid and solid particles) suspended in ambient air. The

35、 symbol ePMxdescribes the efficiency of an air cleaning device to particles with an optical diameter between 0,3 m and x m. The following particle size ranges are used in the ISO 16890 series for the listed efficiency values.Table 1 Optical particle diameter size ranges for the definition of the eff

36、iciencies , ePMxEfficiency Size range, mePM100,3 10ePM2,50,3 2,5ePM10,3 1Air filters for general ventilation are widely used in heating, ventilation and air-conditioning applications of buildings. In this application, air filters significantly influence the indoor air quality and, hence, the health

37、of people, by reducing the concentration of particulate matter. To enable design engineers and maintenance personnel to choose the correct filter types, there is an interest from international trade and manufacturing for a well-defined, common method of testing and classifying air filters according

38、to their particle efficiencies, especially with respect to the removal of particulate matter. Current regional standards are applying totally different testing and classification methods, which do not allow any comparison with each other, and thus hinder global trade with common products. Additional

39、ly, the current industry standards have known limitations by generating results which often are far away from filter performance in service, i.e. overstating the particle removal efficiency of many products. With this new ISO 16890 series, a completely new approach for a classification system is ado

40、pted, which gives better and more meaningful results compared to the existing standards.The ISO 16890 series describes the equipment, materials, technical specifications, requirements, qualifications and procedures to produce the laboratory performance data and efficiency classification based upon t

41、he measured fractional efficiency converted into a particulate matter efficiency (ePM) reporting system.Air filter elements according to the ISO 16890 series are evaluated in the laboratory by their ability to remove aerosol particulate expressed as the efficiency values ePM1, ePM2,5and ePM10.The ai

42、r filter elements can then be classified according to the procedures defined in ISO 16890-1. The particulate removal efficiency of the filter element is measured as a function of the particle size in the range of 0,3 m to 10 m of the unloaded and unconditioned filter element as per the procedures de

43、fined in ISO 16890-2. After the initial particulate removal efficiency testing, the air filter element is conditioned ISO 2016 All rights reserved vBS EN ISO 16890-4:2016ISO 16890-4:2016(E)according to the procedures defined in this part of ISO 16890 and the particulate removal efficiency is repeate

44、d on the conditioned filter element. This is done to provide information about the intensity of any electrostatic removal mechanism which may or may not be present with the filter element for test. The average efficiency of the filter is determined by calculating the mean between the initial efficie

45、ncy and the conditioned efficiency for each size range. The average efficiency is used to calculate the ePMxefficiencies by weighting these values to the standardized and normalized particle size distribution of the related ambient aerosol fraction. When comparing filters tested in accordance with t

46、he ISO 16890 series, the fractional efficiency values shall always be compared among the same ePMxclass (ex. ePM1of filter A with ePM1of filter B). The test dust capacity and the initial arrestance of a filter element are determined as per the test procedures defined in ISO 16890-3.vi ISO 2016 All r

47、ights reservedBS EN ISO 16890-4:2016INTERNATIONAL STANDARD ISO 16890-4:2016(E)Air filters for general ventilation Part 4: Conditioning method to determine the minimum fractional test efficiency1 ScopeThis part of ISO 16890 establishes a conditioning method to determine the minimum fractional test ef

48、ficiency.It is intended for use in conjunction with ISO 16890-1, ISO 16890-2 and ISO 16890-3, and provides the related test requirements for the test device and conditioning cabinet as well as the conditioning procedure to follow.The conditioning method described in this part of ISO 16890 is referri

49、ng to a test device with a nominal face area of 610 mm 610 mm (24 inch 24 inch).ISO 16890 (all parts) refers to particulate air filter elements for general ventilation having an ePM1efficiency less than or equal to 99 % and an ePM10efficiency greater than 20 % when tested according to the procedures defined within ISO 16890 (all parts).NOTE The lower limit for this test procedure is set at a minimum ePM10efficiency of 20 % since it will be very difficult for a test filter element below this level to meet the statistical