EN ISO 15908-2002 en Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives《热塑塑料管道用胶粘剂 胶粘剂热稳定性的测试方法 ISO 15908-2002》.pdf

《EN ISO 15908-2002 en Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives《热塑塑料管道用胶粘剂 胶粘剂热稳定性的测试方法 ISO 15908-2002》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 15908-2002 en Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives《热塑塑料管道用胶粘剂 胶粘剂热稳定性的测试方法 ISO 15908-2002》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 15908:2002 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives The European Standard EN ISO 15908:2002 has the status of a British Standard ICS 83.180 BS EN ISO 15908:2002 This British Standard was published under

2、the authority of the Standards Policy and Strategy Committee on 30 April 2003 BSI 30 April 2003 ISBN 0 580 41646 1 National foreword This British Standard is the official English language version of EN ISO 15908:2002. It is identical with ISO 15908:2002. The UK participation in its preparation was e

3、ntrusted to Technical Committee PRI/52, Adhesives, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this doc

4、ument may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its

5、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests

6、 informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this docume

7、nt indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO15908 December2002 ICS83.180 Englishversion AdhesivesforthermoplasticpipingsystemsTestmethodfor thedeterminationofthermalstabilityofadhesives(

8、ISO 15908:2002) Adhsifspourrseauxdetuyauteriesenmatires thermoplastiquesMthodedessaidestabilitthermique dunadhsif(ISO15908:2002) KlebstoffefrthermoplastischeRohrleitungssysteme PrfverfahrenfrdieBestimmungderthermischen BestndigkeitvonKlebstoffen(ISO15908:2002) ThisEuropeanStandardwasapprovedbyCENon2

9、1June2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCent

10、reortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodi

11、esofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStas

12、sart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO15908:2002EENISO15908:2002(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Termsanddefinitions. .4 4 Principle4 5 Safety 4 6 Apparatus .4 7 Testmethod. .5 8

13、 Expressionofresults . .6 9 Testreport . .6ENISO15908:2002(E) 3 Foreword ThisdocumentENISO15908:2002hasbeenpreparedbyTechnicalCommitteeCEN/TC193“Adhesives“,the secretariatofwhichisheldbyAENOR,incollaborationwithTechnicalCommitteeISO/TC138“Plastics,pipes, fittingsandvalvesfortransportoffluids“. ThisE

14、uropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyJune2003,andconflictingnationalstandardsshallbewithdrawnatthelatestby June2003. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing count

15、riesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain, Sweden,SwitzerlandandtheUnitedKingdom.ENISO15908:2002(E) 4 1Scope ThisEuropeanStandardspecifiesatestmethodforthed

16、eterminationofthethermalstabilityofchloridecontaining solventbasedandsolventfreeadhesivesforjoiningthermoplasticpipingsystems. 2 Normativereferences ThisEuropeanStandardincorporates,bydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthe

17、text,andthepublicationsarelistedhereafter.Fordated references,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropeanStandardonly whenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthepublicationreferred toapplies(includingamendments). EN923, Adhesiv

18、esTermsanddefinitions. EN1066, AdhesivesSampling. EN1067, AdhesivesExaminationandpreparationofsamplesfortesting. 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsanddefinitionsofEN923apply. 4Principle Asampleofdryadhesivefilmisheatedinatesttubeat200C.Indicatorpaperisusedtoindicatew

19、henthe adhesivefilmreleaseshydrochloride.Thetimetakenfortheadhesivefilmtoreleasehydrochlorideat200Cis takenasameasureofthethermalstabilityoftheadhesive. 5Safety Personsusingthisstandardshallbefamiliarwithnormallaboratorypractice. Thisstandarddoesnotpurporttoaddressallthesafetyproblems,ifany,associat

20、edwithitsuse. Itistheresponsibilityoftheusertoestablishsafetyandhealthpracticesandtoensurecompliancewithany Europeanornationalregulatoryconditions. 6Apparatus 6.1 Heatingblock, forheatingtesttubesat(200 0,5)C 6.2 Testtubes, ofglass,height110mm,diameter5mmandwallthickness0,9mm 6.3 Universalindicatorp

21、aper , pH111 6.4 Adhesiveapplicator, capableofproducinganadhesivefilmofthickness 1mm mm 0 +0,1ENISO15908:2002(E) 5 6.5 Glassplate 6.6 Stopwatch 7 Testmethod 7.1 Conditiontheadhesive,theapplicatorandthetestplateat(23 2)Cand(50 5)%relativehumidityforat least6h.Thetestplateandtheadhesiveapplicatorshall

22、befreeofdirtandgrease. 7.2 TakearepresentativesampleoftheadhesivetobetestedasdescribedinEN1066andexamineand prepareitfortestingasdescribedinEN1067. 7.3 Afterconditioning,pourtheadhesiveontotheglassplateandspreaditusingtheadhesiveapplicator.An adhesivefilmof1mmthicknessshallbeobtained.Allowtheadhesiv

23、efilmtodryfor(24 2)hat(23 2)C. 7.4 Removetheadhesivefilmfromtheglassplate,andcutitintosmallpieceswithmaximumedgelengthof 2mm.Fillthetesttubewiththepiecesoftheadhesivefilm(Figure1)toadepthofapproximately10mmwhichis equivalentto(50 5)mgadhesive.Apiece,approximately10mmlength,ofindicatorpaperisplacedin

24、thetopof thetesttube.Preparethreetesttubesforeachadhesiveundertest. Key 1 Indicatorpaper 2 Sampleadhesive(filmpieces),approximately10mmlength Figure1Testtube 7.5 Bringtheheatingblockto(200 0,5)C.Placethetesttubesintheheatingblockandimmediatelystartthe stopwatch.Thetesttubesshallbe(66 1)mmintheheatin

25、gblockand(44 1)mmabovetheheatingblock (Figure2). Whenthelowerpartoftheindicatorpaperchangescolour(pH=3,fromyellowtored)stopthestopwatch.Record thetimeinminutestothenearest0,5min.ENISO15908:2002(E) 6 Dimensionsinmillimetres Key 1Temperature(200 0,5)C Figure2Heatingblockwithtesttubes 8 Expressionofres

26、ults Expressthethermalstabilityoftheadhesiveinminutesasthearithmeticmeanofthethreeresults. 9 Testreport Thetestreportshallinclude: a)areferencetothisEuropeanStandard; b)thetypeandidentificationoftheadhesivetested; c)thethermalstabilityrecordedforeachtestandthearithmeticmean; d)anymodificationtothepr

27、oceduredescribedinthisstandard,andanycircumstanceswhichmayhaveaffected theresults; e)thedateoftest.BS EN ISO 15908:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view

28、 on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the

29、 quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +

30、44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel

31、: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless

32、 otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its prod

33、ucts and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other bene

34、fits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at htt

35、p:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval syste

36、m or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.