EN ISO 15750-1-2008 en Packaging - Steel drums - Part 1 Removable head (open head) drums with a minimum total capacity of 208 l 210 l and 216 5 l《包装 钢制鼓形桶 最小总容量为208L 210L和216 5L的可拆.pdf
《EN ISO 15750-1-2008 en Packaging - Steel drums - Part 1 Removable head (open head) drums with a minimum total capacity of 208 l 210 l and 216 5 l《包装 钢制鼓形桶 最小总容量为208L 210L和216 5L的可拆.pdf》由会员分享,可在线阅读,更多相关《EN ISO 15750-1-2008 en Packaging - Steel drums - Part 1 Removable head (open head) drums with a minimum total capacity of 208 l 210 l and 216 5 l《包装 钢制鼓形桶 最小总容量为208L 210L和216 5L的可拆.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD BS EN ISO 15750-1:2008 Packaging Steel drums Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l ICS 55.140 BS EN ISO 15750-1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on
2、 11 June 2002 BSI 2008 ISBN 978 0 580 61023 3 National foreword This British Standard is the UK implementation of EN ISO 15750-1:2008. It is identical with ISO 15750-1:2002. It supersedes BS ISO 15750-1:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Commi
3、ttee PKW/5, Primary and transport packaging. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with
4、a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comments 30 November 2008 This corrigendum renumbers BS ISO 15750-1:2002 as BS EN ISO 15750-1:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15750-1 June 2008 ICS 55.14
5、0 English Version Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002) Emballages - Fts en acier - Partie 1: Fts ouverture totale dune capacit totale minimale de 208 l, 210 l et 216,5 l (ISO 15750-1:2002) Verp
6、ackung - Stahlfsser - Teil 1: Deckelfsser mit einem Gesamtvolumen von mindestens 208 l, 210 l und 216,5 l (ISO 15750-1:2002) This European Standard was approved by CEN on 16 May 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
7、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versio
8、ns (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,
9、Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STAN
10、DARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15750-1:2008: EForeword The text of ISO 15750
11、-1:2002 has been prepared by Technical Committee ISO/TC 122 “Packaging” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 15750-1:2008 by Technical Committee CEN/TC 261 “Packaging” the secretariat of which is held by AFNOR. This European Standard shall be
12、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn at the latest by December 2008. Attention is drawn to the possibility that some of the elements of this documen
13、t may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aus
14、tria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsem
15、ent notice The text of ISO 15750-1:2002 has been approved by CEN as a EN ISO 15750-1:2008 without any modification. BS EN ISO 15750-1:2008Introduction Throughout the world a large number of steel drum types with different dimensions and characteristics are being used. The differences in location of
16、the filling opening and outer dimensions result in differences in filling, handling and transportation. This part of ISO 15750 gives uniform specifications for four main types of drums for use in international trade and the preferred target option is drum type A (see Table 1). It specifies the chara
17、cteristics and dimensions of steel drums which are of importance for the exchangeability, and does not give detailed performance requirements and related test methods. The performance requirements depend on the specific application. Where the drums are intended to be used for the transport of danger
18、ous goods, attention is drawn to the regulatory requirements which govern the transport of those goods in the countries concerned, including capseals/overseals fitted in accordance with the certificate. Depending upon the mode of transport, this means meeting the requirements of: UN (United Nations)
19、: Recommendations on the transport of dangerous goods. Model regulations; ICAO (International Civil Aviation Organization): Technical Instructions for safe transport of dangerous goods by air; IMO (International Maritime Organization): International Maritime Dangerous Goods (IMDG) Code. This involve
20、s the certification and marking of the drums according to the regulations. iii BS EN ISO 15750-1:2008 blank ISO 2002 All irthgs resdevre 1 Packaging Steel drums Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l 1 Scope This part of ISO 15750 specifies
21、 the characteristics and dimensions of removable head (open head) drums, manufactured from steel sheet, having a total capacity of 208 l, 210 l and 216,5 l. It also specifies a method for measuring the total and brimful capacity. 2 Normative references The following normative documents contain provi
22、sions which, through reference in this text, constitute provisions of this part of ISO 15750. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 15750 are encouraged to investigate the poss
23、ibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 228-1:2000, Pipe threads where
24、pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation ISO 3573:1986, Hot-rolled carbon steel sheet of commercial and drawing qualities ISO 3574:1986, Cold-reduced carbon steel sheet of commercial and drawing qualities ISO 15750-3, Packaging Steel drums Part
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ENISO1575012008ENPACKAGINGSTEELDRUMSPART1REMOVABLEHEADOPENHEADDRUMSWITHAMINIMUMTOTALCAPACITYOF208L210LAND2165L
链接地址:http://www.mydoc123.com/p-725711.html