EN ISO 15614-7-2016 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7 Overlay welding《金属材料的焊接工艺试验7部分焊接程序的规范和鉴定 堆焊(IS.pdf

《EN ISO 15614-7-2016 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7 Overlay welding《金属材料的焊接工艺试验7部分焊接程序的规范和鉴定 堆焊(IS.pdf》由会员分享，可在线阅读，更多相关《EN ISO 15614-7-2016 en Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7 Overlay welding《金属材料的焊接工艺试验7部分焊接程序的规范和鉴定 堆焊(IS.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 15614-7:2016Specification and qualificationof welding procedures formetallic materials Weldingprocedure testPart 7: Overlay welding (ISO 15614-7:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 15614-7:2016 BRITISH STANDARDNational forewordThi

2、s British Standard is the UK implementation of EN ISO 15614-7:2016. It supersedes BS EN ISO 15614-7:2007 which iswithdrawn.The UK participation in its preparation was entrusted to Technical Committee WEE/36, Qualification of welding personnel and welding procedures.A list of organizations represente

3、d on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 829

4、49 9 ICS 25.160.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUR

5、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15614-7 October 2016 ICS 25.160.10 Supersedes EN ISO 15614-7:2007English Version Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) Descriptif et qual

6、ification dun mode opratoire de soudage pour les matriaux mtalliques - preuve de qualification dun mode opratoire de soudage - Partie 7: Rechargement par soudage (ISO 15614-7:2016) Anforderung und Qualifizierung von Schweiverfahren fr metallische Werkstoffe - Schweiverfahrensprfung - Teil 7: Auftrag

7、schweien (ISO 15614-7:2016) This European Standard was approved by CEN on 11 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

8、 lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u

9、nder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Forme

10、r Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EU

11、ROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15614-7:2016 EBS EN ISO 15614-7:2016EN ISO 15614-7:2016

12、 (E) 3 European foreword This document (EN ISO 15614-7:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be

13、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may

14、be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 15614-7:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound

15、to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

16、Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 15614-7:2016 has been approved by CEN as EN ISO 15614-7:2016 without any modification. ISO 2016Specification and qualification of welding procedures for metallic materials W eld

17、ing procedure test Part 7: Overlay weldingDescriptif et qualification dun mode opratoire de soudage pour les matriaux mtalliques preuve de qualification dun mode opratoire de soudage Partie 7: Rechargement par soudageINTERNATIONAL STANDARDISO15614-7Second edition2016-10-15Reference numberISO 15614-7

18、:2016(E)ISO 15614-7:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, includi

19、ng photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +4

20、1 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS EN ISO 15614-7:2016ISO 15614-7:2016(E)Foreword vIntroduction vii1 Scope .12 Normative references 13 Terms and definitions .24 Preliminary welding procedure specification (pWPS) .34.1 Corrosion resistant overlay welding 34.2 Hardfacing .

21、 35 Welding procedure qualification test .36 Test piece 36.1 Shape and dimensions of test pieces . 36.1.1 General 36.1.2 Corrosion resistant overlay welding and hardfacing . 36.1.3 Intermediate layer 36.2 Welding of test pieces . 57 Examination and testing .57.1 Extent of examination and testing . 5

22、7.2 Non-destructive testing (NDT) 67.3 Location and taking of test specimens . 67.4 Destructive testing . 87.4.1 General 87.4.2 Macroscopic examination 97.4.3 Hardness testing 97.4.4 Side bend testing 97.4.5 Chemical analysis .107.4.6 Delta ferrite content/ferrite number (FN) .107.5 Acceptance crite

23、ria . 117.5.1 Acceptance criteria for non-destructive testing (NDT) .117.5.2 Destructive testing 117.6 Re-testing 128 Range of qualification 128.1 General 128.2 Qualification related to the manufacturer 128.3 Qualification related to the material . 138.3.1 Parent metal 138.3.2 Parent metal thickness

24、 138.4 Qualification related to the filler material/overlay 138.4.1 Filler material designation . 138.4.2 Thickness of the overlay . 138.5 Common to welding procedures . 148.5.1 Welding process 148.5.2 Welding position .148.5.3 Type of current .148.5.4 Arc energy .148.5.5 Preheating temperature . 14

25、8.5.6 Interpass temperature .148.5.7 Post-heating for hydrogen release .158.5.8 Post-weld heat-treatment (PWHT) .158.5.9 Number of layers 158.6 Specific to welding processes 15 ISO 2016 All rights reserved iiiContents PageBS EN ISO 15614-7:2016ISO 15614-7:2016(E)8.6.1 Process 111 manual metal arc we

26、lding (metal arc welding with covered electrode) 158.6.2 Processes 12 (submerged arc welding) and 72 (electroslag overlay welding) 158.6.3 Processes 13 gas-shielded metal arc welding and 14 (gas-shielded arc welding with non-consumable tungsten electrode) 168.6.4 Process 15 (plasma arc welding) 168.

27、6.5 Process 153 (plasma transferred arc) 168.6.6 Process 311 (oxy-acetylene welding) .169 Welding procedure qualification record (WPQR) .17Annex A (informative) Welding procedure qualification record form (WPQR) .18Bibliography .22iv ISO 2016 All rights reservedBS EN ISO 15614-7:2016ISO 15614-7:2016

28、(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a

29、 technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matte

30、rs of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This docu

31、ment was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all su

32、ch patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and doe

33、s not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.i

34、so.org/iso/foreword.html.The committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Quality management in the field of welding.This second edition cancels and replaces the first edition (ISO 15614-7:2007), which has been technically revised.ISO 15614

35、consists of the following parts, under the general title Specification and qualification of welding procedures for metallic materials Welding procedure test : Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys Part 2: Arc welding of aluminium and its alloys Part 3: Fus

36、ion welding of non-alloyed and low-alloyed cast irons Part 4: Finishing welding of aluminium castings Part 5: Arc welding of titanium, zirconium and their alloys Part 6: Arc and gas welding of copper and its alloys Part 7: Overlay welding Part 8: Welding of tubes to tube-plate joints Part 10: Hyperb

37、aric dry welding Part 11: Electron and laser beam welding Part 12: Spot, seam and projection welding Part 13: Upset (resistance butt) and flash welding Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys ISO 2016 All rights reserved vBS EN ISO 15614-7:2016ISO 15614-7:2016(E)Request

38、s for official interpretations of any aspect of this part of ISO 15614 should be directed to the secretariat if ISO/TC 44/SC 10 via your national standards body, a complete listing which can be found at www.iso.org.vi ISO 2016 All rights reservedBS EN ISO 15614-7:2016ISO 15614-7:2016(E)IntroductionT

39、his part of ISO 15614 is one of a series of International Standards, the details of which are given in ISO 15607:2003, Annex A.All new welding procedure tests are intended to be carried out in accordance with this edition of ISO 15614-7 from the date of its publication. However, qualifications perfo

40、rmed in accordance with the previous editions of this part of ISO 15614 are still valid and it is not considered necessary to perform additional tests to fulfil its requirements for any application with reference to previous editions. Nevertheless, in order to comply with the requirements of the pre

41、sent edition it may be necessary to perform additional tests for previously qualified WPS. ISO 2016 All rights reserved viiBS EN ISO 15614-7:2016BS EN ISO 15614-7:2016Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding1 ScopeThi

42、s part of ISO 15614 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests.This part of ISO 15614 defines the conditions for execution of welding procedure tests and the range of qualification for welding procedures for all practical w

43、elding operations within the range of variables listed in Clause 8.This part of ISO 15614 applies to all welding processes suitable for overlay welding. In situations where qualification is carried out on a pre-production test piece, the qualification is performed in accordance with ISO 15613 except

44、 that, as far as possible, the testing is according to this part of ISO 15614. Building up and repair of parent metal is covered by ISO 15613 or ISO 15614-1.This edition of ISO 15614-7 is applicable to all new welding procedure qualification tests. It does not invalidate previous welding procedure t

45、ests made in accordance with previous editions of this part of ISO 15614. Where additional tests are required by the present edition, it is only necessary that those additional tests be carried out on a test piece made in accordance with the existing WPS and this part of ISO 15614.If buttering is us

46、ed for welding between dissimilar materials, the welding procedure is qualified in accordance with ISO 15614-1. This buttering may be required for weld combining different material structure or properties, e.g. joining martensitic steels or ferritic steels with austenitic steels.Additional tests may

47、 be required by application standards.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references the latest edition of the refe

48、renced document (including any amendments) applies.ISO 3452-1, Non-destructive testing Penetrant testing Part 1: General principlesISO 5173, Destructive tests on welds in metallic materials Bend testsISO 9015-1, Destructive tests on welds in metallic materials Ha rdness testing Pa rt 1: Hardness tes

49、t on arc welded jointsISO 13916, Welding Gu idance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperatureISO 14174, Welding consumables F luxes for submerged arc welding and electroslag welding ClassificationISO 14175, Welding consumables Gases and gas mixtures for fusion welding and allied processesISO 15607:2003, Specification and qualification of welding procedures for metallic materials G eneral rulesINTERNATIONAL STANDARD ISO 15614