EN ISO 14253-5-2015 en Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 Uncertainty in verification testing of in.pdf

《EN ISO 14253-5-2015 en Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 Uncertainty in verification testing of in.pdf》由会员分享，可在线阅读，更多相关《EN ISO 14253-5-2015 en Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 Uncertainty in verification testing of in.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 14253-5:2015Geometrical productspecifications (GPS) Inspection by measurementof workpieces and measuringequipmentPart 5: Uncertainty in verification testing ofindicating measuring instrumentsBS EN ISO 14253-5:2015 BRITISH STANDARDNational forewordThis British Stand

2、ard is the UK implementation of EN ISO 14253-5:2015.The UK participation in its preparation was entrusted to Technical Committee TDW/4, Technical Product Realization.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to

3、 include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 76441 7 ICS 17.040.01 Compliance with a British Standard cannot confer immunity from legal obligations.

4、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14253-5 September 2015 ICS 17.040.01 English

5、Version Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) Spcification gomtrique des produits (GPS) - Vrification par la mesure des pices et d

6、es quipements de mesure - Partie 5: Incertitude lie aux essais de vrification des appareils de mesure indicateurs (ISO 14253-5:2015) This European Standard was approved by CEN on 10 July 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions fo

7、r giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in thre

8、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bod

9、ies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

10、pain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldw

11、ide for CEN national Members. Ref. No. EN ISO 14253-5:2015 EBS EN ISO 14253-5:2015EN ISO 14253-5:2015 (E) 3 European foreword This document (EN ISO 14253-5:2015) has been prepared by Technical CommitteeISO/TC 213 “Dimensional and geometrical product specifications and verification” in collaboration

12、withTechnical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification”the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by Mar

13、ch 2016, and conflicting national standards shallbe withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject ofpatent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patentright

14、s. According to the CEN-CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,France, Ger

15、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,Turkey and the United Kingdom. Endorsement notice The text of ISO 14253-5:2015 has been approved by CEN as EN ISO 14253-

16、5:2015 without anymodification. BS EN ISO 14253-5:2015ISO 14253-5:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 General 65 Test measurand 75.1 General . 75.2 Input quantities and test measurand definition 86 Tester responsibility criterion . 97 Speci

17、fic issues in testing indicating measuring instruments 117.1 General 117.2 Errors of the indicating measuring instrument.117.3 Errors in user-provided quantity values . 127.4 Using alternative test equipment . 12Annex A (informative) Guidance on using alternative test equipment .14Annex B (informati

18、ve) Relation to the GPS matrix model .16Bibliography .17 ISO 2015 All rights reserved iiiContents PageBS EN ISO 14253-5:2015ISO 14253-5:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of prep

19、aring International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in

20、liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC

21、Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility tha

22、t some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent de

23、clarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information

24、 about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 213, Dimensional and geometrical product specifications and verifications.ISO 14253 consists of the fo

25、llowing parts, under the general title Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment : Part 1: Decision rules for proving conformity or nonconformity with specifications Part 2: Guide to the estimation of uncertainty in GPS measurement, in c

26、alibration of measuring equipment and in product verification Part 3: Guidelines for achieving agreements on measurement uncertainty statements Part 4: Background on functional limits and specification limits in decision rules Part 5: Uncertainty in verification testing of indicating measuring instr

27、uments Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces Technical Reportiv ISO 2015 All rights reservedBS EN ISO 14253-5:2015ISO 14253-5:2015(E)IntroductionThis part of ISO 14253 belongs to the general geometrical product specification (GPS) series of

28、 documents (see ISO 14638). It influences chain link F of all chains of standards in the general GPS matrix.The ISO/GPS matrix model given in ISO 14638 gives an overview of the ISO/GPS system of which this international standard is a part. The fundamental rules of ISO/GPS given in ISO 8015 apply to

29、this part of ISO 14253 and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this part of ISO 14253, unless otherwise indicated.For more detailed information about the relationship of this part of ISO 14253 to other standards and to the GPS matrix model,

30、 see Annex B.Decision rules for deciding conformity or non-conformity to specifications are based on the measurement uncertainty incurred while testing.Usual practice in measurement familiarizes metrologists and practitioners with measurement uncertainty. Any possible effect that may affect the meas

31、urement result is considered and quantified as an uncertainty component and is eventually included in the combined uncertainty. The purpose of the measurement is to gather quantitative information on a given measurand, and the uncertainty statement expresses how reliable that information is.In the c

32、ase of tests of indicating measuring instruments, the purpose of the measurement is to investigate one or more metrological characteristics of the indicating measuring instrument rather than to measure characteristics of features of a workpiece. The uncertainty being evaluated in this case, the test

33、 value uncertainty, quantifies the accuracy of the test value. The test detects the quality of the indicating measuring instrument, reported through the test values and not through the test value uncertainty.The test value uncertainty for indicating measuring instruments is not conceptually trivial

34、to evaluate, and careful consideration is necessary to determine which uncertainty components should and which should not be accounted for.Some tests of indicating measuring instruments may be relative to quantities other than instrument indications, or a single test may investigate both the instrum

35、ent indication(s) and other metrological characteristics. An example is a test of a micrometer investigating the indication error (subject to an MPE) as well as the measuring force (subject to an MPL). For tests, or portions of them, relative to metrological characteristics other than instrument ind

36、ications, this part of ISO 14253 is not applicable: they are about quantities for which the application of the ISO/IEC Guide 98-3 (GUM) and of the ISO 14253-2 is conceptually straightforward, with no need of further guidance in this part of ISO 14253.A rigorous definition of the test value uncertain

37、ty when testing indicating measuring instruments is given. Application of conventional uncertainty evaluation based on this definition and according to the ISO/IEC Guide 98-3 (GUM) and the ISO 14253-2 determines which uncertainty components to account for. ISO 2015 All rights reserved vBS EN ISO 142

38、53-5:2015BS EN ISO 14253-5:2015Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments1 ScopeThis part of ISO 14253 specifies concepts and terms for evaluating the uncerta

39、inties of the test values derived according to a test protocol agreed upon by the parties and relative to instrument indication(s), obtained in verification testing of GPS indicating measuring instruments.NOTE The uncertainty of the test values, referred to as test value uncertainty, is not to be co

40、nfused with the measurement uncertainty associated with using that indicating measuring instrument to measure workpieces. The former only is covered in this part of ISO 14253; for guidance on the latter see the ISO/IEC Guide 98-3 (GUM) and ISO 14253-2.When a test of an indicating measuring instrumen

41、t comprises several test values, some relative to the instrument indication and some to other metrological characteristics, this part of ISO 14253 is concerned with the uncertainty of the former only.This part of ISO 14253 does not provide guidelines to ensure the adequacy of a test protocol; rather

42、, once a test protocol is given, it describes how to evaluate the consequent test value uncertainty.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited

43、applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 10360-1:2000, Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 1: VocabularyISO 14253-1:2013, Geometrical pro

44、duct specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformity or nonconformity with specificationsISO/TR 14253-6:2012, Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Pa

45、rt 6: Generalized decision rules for the acceptance and rejection of instruments and workpiecesISO 14978:2006, Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipmentISO 17450-2:2012, Geometrical product specifications (GPS) General concepts Part 2: Bas

46、ic tenets, specifications, operators, uncertainties and ambiguitiesISO/IEC Guide 98-3:2008, Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)ISO/IEC Guide 99:2007, International vocabulary of metrology Basic and general concepts and associated terms

47、(VIM)INTERNATIONAL STANDARD ISO 14253-5:2015(E) ISO 2015 All rights reserved 1BS EN ISO 14253-5:2015ISO 14253-5:2015(E)3 Terms and definitionsFor the purpose of this document, the terms and definitions given in ISO 10360-1, ISO 14253-1, ISO/TR 14253-6, ISO 14978, ISO 17450-2, ISO/IEC Guide 98-3 (GUM

48、), ISO/IEC Guide 99 (VIM), and the following apply.3.1testsequence of preparatory, measurement, mathematical and decisional actions according to a test protocolNote 1 to entry: Not all steps in the sequence are necessarily present in a test protocol.Note 2 to entry: Tests are often used to verify th

49、e specifications of a GPS indicating measuring instrument.Note 3 to entry: The specification of an indicating measuring instrument may be expressed by one or more MPEs (Maximum Permissible Errors).Note 4 to entry: Prominent cases of tests are the acceptance test and the reverification test.Note 5 to entry: This term is sometimes used in a wider sense, encompassing cases when a test produces a binary or categorical result. An example of a binary assessment is determining whether or not a software algorithm converged. For the p