EN ISO 13140-2-2016 en Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 - Part 2 Abstract test suite《电子收费-车载和路边符合EN ISO 1314.pdf

《EN ISO 13140-2-2016 en Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 - Part 2 Abstract test suite《电子收费-车载和路边符合EN ISO 1314.pdf》由会员分享，可在线阅读，更多相关《EN ISO 13140-2-2016 en Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 - Part 2 Abstract test suite《电子收费-车载和路边符合EN ISO 1314.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 13140-2:2016Electronic fee collection Evaluation of on-board and r o a d s i d e e q u i p m e n t f o r conformity to EN ISO 13141Part 2: Abstract test suite (ISO 13140-2:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 13140-2:2016 BRITISH S

2、TANDARDNational forewordThis British Standard is the UK implementation of EN ISO 13140-2:2016. It supersedes PD CEN ISO/TS 13140-2:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems.A list of organizations repre

3、sented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 58

4、0 92833 8 ICS 03.220.20; 35.240.60 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate T e x t a

5、f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13140-2 December 2016 ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 13140-2:2012English Version Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 - Part 2: Abstract test suit

6、e (ISO 13140-2:2016) Perception du tlpage - valuation des quipements embarqus et en bord de route quant la conformit avec lISO 13141 - Partie 2: Suite dessais abstraite (ISO 13140-2:2016) Elektronische Gebhrenerhebung - Bewertung der Konformitt von fahrzeuginternen und straenseitigen Ausrstungen nac

7、h EN ISO 13141 - Teil 2: Zusammengefasstes Prfprogramm (ISO 13140-2:2016) This European Standard was approved by CEN on 6 December 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national

8、 standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version

9、 in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czec

10、h Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUR

11、OPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13140-2:201

12、6 EBS EN ISO 13140-2:2016EN ISO 13140-2:2016 (E) 3 European foreword This document (EN ISO 13140-2:2016) has been prepared by Technical Committee ISO/TC 204 “Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent transport systems” the secretariat of which i

13、s held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility th

14、at some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN ISO/TS 13140-2:2012. According to the CEN-CENELEC Internal Regulations, the national standards or

15、ganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

16、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 13140-2:2016 has been approved by CEN as EN ISO 13140-2:2016 without any modification. BS EN ISO 13140-2:2016ISO 13140-2:2016(E)

17、Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Abbreviated terms 25 Abstract Test Method (ATM) . 35.1 General . 35.2 Test architecture 35.3 Protocol Implementation Extra Information for Testing (PIXIT) 36 Untestable Test Purposes (TP) 47 Abstract test suite

18、(ATS) conventions . 47.1 General . 47.2 Naming conventions . 47.2.1 Declarations part . 47.2.2 Constraints part 67.2.3 Dynamic part . 67.3 Implementation conventions 77.3.1 Declaration part 77.3.2 Constraint part 77.3.3 Dynamic part . 7Annex A (normative) Abstract test suite (ATS) for on-board equip

19、ment . 8Annex B (normative) Abstract test suite (ATS) for roadside equipment 9Annex C (informative) PIXIT proforma for on-board equipment 10Annex D (informative) PIXIT proforma for roadside equipment 12Bibliography .14 ISO 2016 All rights reserved iiiContents PageBS EN ISO 13140-2:2016ISO 13140-2:20

20、16(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which

21、 a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all mat

22、ters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This do

23、cument was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all

24、such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and d

25、oes not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www

26、.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 204, Intelligent transport systems.This first edition of ISO 13140-2 cancels and replaces ISO/TS 13140-2:2012, which has been technically revised. This first edition incorporates the following main modifications compare

27、d to the Technical Specification: conversion from a Technical Specification to an International Standard; amendment of terms, in order to reflect harmonization of terms across electronic fee collection (EFC) standards; amendments to reflect changes in ISO 13140-1 due to changes to the underlying bas

28、e standards, in particular ISO 13141; editorial and formal corrections.A list of all parts in the ISO 13140 series can be found on the ISO website.iv ISO 2016 All rights reservedBS EN ISO 13140-2:2016ISO 13140-2:2016(E)IntroductionISO 17575 is part of a set of standards that supports interoperabilit

29、y of autonomous EFC-systems. It defines the EFC context data, their charge reports and their use of communication infrastructure.The set of standards also supports short-range communication links in the context of autonomous electronic fee collection (EFC) on-board equipment (OBE) to enable spot che

30、cks for the enforcement process. The application interface is defined in ISO 13141:2015.Within the set of EFC standards, this document defines the process and tests for conformity evaluation of OBE and roadside equipment (RSE) that comply with the requirements in ISO 13141:2015.This document is inte

31、nded to assess OBE and RSE capabilities, assess OBE and RSE behaviour, serve as a guide for OBE and RSE conformance evaluation and type approval, achieve comparability between the results of the corresponding tests applied in different places at different times, and facilitate communication between

32、parties (for example, between equipment manufacturers and test houses).This document is based on ISO 13141:2015, the set of dedicated short-range communication (DSRC) standards defining the communication stack, and ISO 9646.This document is based on using the tree and tabular combined notation (TTCN

33、) that is a standardized language suitable for specification of test cases and steps for assessment of protocol and application behaviour. The TTCN language is also supported by modern automated tools that accelerate software design, implementation and testing. ISO 2016 All rights reserved vBS EN IS

34、O 13140-2:2016BS EN ISO 13140-2:2016Electronic fee collection Evaluation of on-board and roadside equipment for conformity to ISO 13141 Part 2: Abstract test suite1 ScopeThis document specifies the abstract test suite (ATS) to evaluate the conformity of on-board equipment (OBE) and roadside equipmen

35、t (RSE) to ISO 13141:2015 in accordance with the test suite structure and test purposes defined in ISO 13140-1:2016.It provides a basis for conformance tests for dedicated short-range communication (DSRC) equipment (OBE and RSE) to support interoperability between different equipment supplied by dif

36、ferent manufacturers.NOTE The OBE and RSE are subject to additional testing in order to ascertain that they fulfil the essential radio requirements as set out in European Directives, a pre-requisite for CE marking and placing on the European market. They are also likely to be subject to additional t

37、esting of physical, environmental endurance, quality assurance and control at manufacturing, charge point integration, as part of factory, site and system acceptance testing. The definition of these tests is outside the scope of this document.2 Normative referencesThe following documents are referre

38、d to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 9646-3:1998, Information

39、technology Open Systems Interconnection Conformance testing methodology and framework Part 3: The Tree and Tabular Combined Notation (TTCN)ETSI/TS 102 486-2-3 V1.2.1 (2008-10), Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Test specific

40、ations for Dedicated Short Range Communication (DSRC) transmission equipment; Part 2: DSRC application layer; Sub-Part 3: Abstract Test Suite (ATS) and partial PIXIT proforma3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1base standardapproved i

41、nternational standard, technical specification or ITU-T RecommendationNote 1 to entry: This includes but is not limited to approved standard deliverables from ISO, ITU, CEN, CENELEC, ETSI and IEEE.SOURCE: ISO/IEC/TR 10000-1:1998, 3.1.1, modifiedINTERNATIONAL STANDARD ISO 13140-2:2016(E) ISO 2016 All

42、 rights reserved 1BS EN ISO 13140-2:2016ISO 13140-2:2016(E)3.2implementation conformance statementstatement of capabilities and options that have been implemented defining to what extent the implementation is compliant with a given specificationSOURCE: ISO/TS 14907-2:2016, 3.63.3implementation confo

43、rmance statement proformadocument, in the form of a questionnaire, which when completed for an implementation or a system becomes an implementation conformance statement (ICS)SOURCE: ISO/IEC 9646-1:1994, 3.3.403.4implementation extra information for testingstatement containing all of the information

44、 related to the implementation under test (IUT) and its corresponding system under test (SUT) which will enable the testing laboratory to run an appropriate test suite against that IUTSOURCE: ISO/IEC 19015:2000, 3.203.5implementation extra information for testing proformadocument, in the form of a q

45、uestionnaire, which when completed for an implementation under test (IUT) becomes an implementation extra information for testing (IXIT)SOURCE: ISO/IEC 9646-1:1994, 3.3.42, modified3.6on-board equipmentall required equipment on-board a vehicle for performing required EFC functions and communication

46、services3.7on-board unitsingle electronic unit on-board a vehicle for performing specific EFC functions and for communication with external systems3.8roadside equipmentequipment located along the road, either fixed or mobile3.9testercombination of equipment, humans and processes able to perform spec

47、ified conformance testsSOURCE: EN 15876-1:2016, 3.124 Abbreviated termsAP Application Process (ISO 14906)ASN.1 Abstract Syntax Notation One (ISO/IEC 8824-1)ATS Abstract Test SuiteBI Behaviour Invalid (i.e. Invalid Behaviour tests)BV Behaviour Valid (i.e. Valid Behaviour tests)2 ISO 2016 All rights r

48、eservedBS EN ISO 13140-2:2016ISO 13140-2:2016(E)Cf Confirm (ISO 14906)CM Co-ordination messageDSRC Dedicated Short-Range communication (ISO 14906)DUT Device Under Test (ISO/TS 14907-2)EFC Electronic Fee Collection (ISO 17573)ICS Implementation Conformance Statement (EN 15509)IXIT Implementation eXtr

49、a Information for Testing (ISO/TS 14907-2)IUT Implementation Under Test (ISO/TS 14907-2)MAC Medium Access Control (EN 12795)OBE On-board equipmentOBU On-board unitPIXIT Protocol Implementation extra Information for TestingRSE Roadside equipmentSAP Service Access PointSCS Semiconductor Characterization SystemTC Test CaseTSS Test Suite Structure (EN 15876-1)5 Abstract Test Method (ATM)5.1 GeneralThis clause describes the abstract test method (ATM) used to test the layers at the OBE side and at the RSE side.5.2 Test