EN ISO 12354-1-2017 en Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1 Airborne sound insulation between rooms.pdf

《EN ISO 12354-1-2017 en Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1 Airborne sound insulation between rooms.pdf》由会员分享，可在线阅读，更多相关《EN ISO 12354-1-2017 en Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1 Airborne sound insulation between rooms.pdf（100页珍藏版）》请在麦多课文档分享上搜索。

1、Building acoustics - Estimation of acoustic performance of buildings from the performance of elementsPart 1: Airborne sound insulation between roomsBS EN ISO 123541:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEANSTANDARDNORME EUROPENNE EUROPISCHE NORMEN

2、ISO 12354-1 August 2017ICS 91.120.20 Supersedes EN 12354-1:2000EnglishVersionBuilding acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1:Airborne sound insulation between rooms (ISO 12354-1:2017)Acoustique du btiment - Calcul de la performanceacoust

3、ique des btiments partir de la performance des lments - Partie 1: Isolement acoustique auxbruits ariens entre des locaux (ISO 12354-1:2017) Bauakustik - Berechnung der akustischen Eigenschaften von Gebuden aus denBauteileigenschaften - Teil1: Luftschalldmmungzwischen Rumen (ISO 12354-1:2017)This Eur

4、opean Standard was approved by CEN on 23 April 2017.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thisEuropean Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical referencesconcer

5、ning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made bytranslation under the responsibility of a CEN member into

6、its own language and notified to the CEN-CENELEC ManagementCentre has the same status as the officialversions.CEN members are the nationalstandards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany

7、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE

8、FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reservedworldwide for CENnational Members.Ref. No. EN ISO 12354-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 123541:2017. I

9、t is identical to ISO 123541:2017. It supersedes BS EN 123541:2000, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/1/6, Building acoustics.A list of organizations represented on this committee can be obtained on request to its secretary.This public

10、ation does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92659 4ICS 91.120.20Compliance with a British Standard cannot confer immunity

11、from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 123541:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS

12、O 12354-1 August 2017 ICS 91.120.20 Supersedes EN 12354-1:2000English Version Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017) Acoustique du btiment - Calcul de la performance ac

13、oustique des btiments partir de la performance des lments - Partie 1: Isolement acoustique aux bruits ariens entre des locaux (ISO 12354-1:2017) Bauakustik - Berechnung der akustischen Eigenschaften von Gebuden aus den Bauteileigenschaften - Teil 1: Luftschalldmmung zwischen Rumen (ISO 12354-1:2017)

14、 This European Standard was approved by CEN on 23 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe

15、rences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE

16、N member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedoni

17、a, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

18、 EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12354-1:2017 EBS EN ISO 123541:2017EN ISO 12354-1:2017 (E) 3 European forewor

19、d This document (EN ISO 12354-1:2017) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the s

20、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be th

21、e subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12354-1:2000. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe

22、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovaki

23、a, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12354-1:2017 has been approved by CEN as EN ISO 12354-1:2017 without any modification. ISO 12354-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federat

24、ion of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committe

25、e. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and th

26、ose intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2

27、(see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the

28、 document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific te

29、rms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by the European Committee f

30、or Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with ISO Technical Committee TC 43, Acoustics, SC 2, Building acoustics, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreemen

31、t).This first edition cancels and replaces ISO 15712-1:2005, which has been technically revised. A list of all the parts in the ISO 12354 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 123541:2017ISO 12354-1:2017(E)ForewordISO (the International Organization for Stan

32、dardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right

33、 to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures u

34、sed to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules

35、 of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights ident

36、ified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanatio

37、n on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was p

38、repared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with ISO Technical Committee TC 43, Acoustics, SC 2, Building acoustics, in accordance with the agreement on technical cooperation b

39、etween ISO and CEN (Vienna Agreement).This first edition cancels and replaces ISO 15712-1:2005, which has been technically revised. A list of all the parts in the ISO 12354 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 123541:2017ISO 12354-1:2017(E)IntroductionThis

40、document is part of a series specifying calculation models in building acoustics.Although this document covers the main types of building construction it cannot as yet cover all variations in the construction of buildings. It sets out an approach for gaining experience for future improvements and de

41、velopments.The accuracy of this document can only be specified in detail after widespread comparisons with field data, which can only be gathered over a period of time after establishing the prediction model. To help the user in the meantime, indications of the accuracy have been given, based on ear

42、lier comparisons with comparable prediction models and an estimation procedure has been presented in Annex K. It is the responsibility of the user (i.e. a person, an organization, the authorities) to address the consequences of the accuracy, inherent for all measurement and prediction methods, by sp

43、ecifying requirements for the input data and/or applying a safety margin to the results or applying some other correction. This document is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of building const

44、ruction, taking into account local circumstances.The calculation models described use the most general approach for engineering purposes, with a clear link to measurable quantities that specify the performance of building elements. The known limitations of these calculation models are described in t

45、his document. Other calculation models also exist, each with their own applicability and restrictions.The models are based on experience with predictions for dwellings; they could also be used for other types of buildings provided the construction systems and dimensions of elements are not too diffe

46、rent from those in dwellings.The document also provides details for application to lightweight constructions (typically steel or wood framed lightweight elements as opposed to heavier masonry or concrete elements). ISO 2017 All rights reserved vBS EN ISO 123541:2017ISO 12354-1:2017(E)IntroductionThi

47、s document is part of a series specifying calculation models in building acoustics.Although this document covers the main types of building construction it cannot as yet cover all variations in the construction of buildings. It sets out an approach for gaining experience for future improvements and

48、developments.The accuracy of this document can only be specified in detail after widespread comparisons with field data, which can only be gathered over a period of time after establishing the prediction model. To help the user in the meantime, indications of the accuracy have been given, based on e

49、arlier comparisons with comparable prediction models and an estimation procedure has been presented in Annex K. It is the responsibility of the user (i.e. a person, an organization, the authorities) to address the consequences of the accuracy, inherent for all measurement and prediction methods, by specifying requirements for the input data and/or applying a safety margin to the results or applying some other correction. This document is intended for acoustical experts and provides the framework for the development of application docum