EN ISO 11957-2009 en Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements《声学 隔音间隔音性能测定 实验室和现场测量》.pdf

《EN ISO 11957-2009 en Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements《声学 隔音间隔音性能测定 实验室和现场测量》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11957-2009 en Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements《声学 隔音间隔音性能测定 实验室和现场测量》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO11957:2009ICS 17.140.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAcoustics Determination ofsound insulationperformance of cabins Laboratory and insitu measurements(ISO 11957:1996)This British Standardwas published under theauthority of the Standar

2、dsPolicy and StrategyCommittee on 30 April2010 BSI 2010ISBN 978 0 580 67689 5Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 11957:2009National forewordThis British Standard is the UK implementation of EN ISO 11957:2009.It is identical to ISO 11957:1996. It supersedes BS EN ISO

3、11957:1997which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EH/1/4, Machinery noise.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionso

4、f a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 11957August 2009ICS 17.140.01 Supersedes EN ISO 11957:1996 English VersionAcoustics - Determination of

5、 sound insulation performance ofcabins - Laboratory and in situ measurements (ISO 11957:1996)Acoustique - Dtermination des performances disolationacoustique des cabines - Mesurages en laboratoire et insitu (ISO 11957:1996)Akustik - Messung der Schalldmmung vonSchallschutzkabinen - Messungen im Labor

6、 und imEinsatzfall (ISO 11957:1996)This European Standard was approved by CEN on 3 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-dat

7、e lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the r

8、esponsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, I

9、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue M

10、arnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11957:2009: EBS EN ISO 11957:2009EN ISO 11957:2009 (E) 3 Foreword The text of ISO 11957:1996 has been prepared by Technical Committee ISO/TC 43 “Acous

11、tics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11957:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an id

12、entical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be he

13、ld responsible for identifying any or all such patent rights. This document supersedes EN ISO 11957:1996. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relatio

14、nship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus

15、, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1195

16、7:1996 has been approved by CEN as a EN ISO 11957:2009 without any modification. BS EN ISO 11957:2009EN ISO 11957:2009 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a man

17、date given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 98/37/EC, amended by 98/79/EC on machinery. Once this standard is cited in the Official Journal of the European Communities un

18、der that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and

19、 associated EFTA regulations. WARNING - Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 11957:2009EN ISO 11957:2009 (E) 5 Annex ZB (informative) Relationship between this European Standard and the Essential Requireme

20、nts of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard

21、 is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformit

22、y with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:

23、2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009BS EN ISO 11957:2009This page deliberately left blankBS EN ISO11957:2009BSI GroupHeadquarters 389Chiswick High Road,

24、London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBrit

25、ish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while

26、usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers aut

27、omatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI

28、Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinte

29、rnational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing membe

30、rs of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to Brit

31、ish Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except asperm

32、itted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of

33、implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: