EN ISO 11819-1-2001 en Acoustics - Measurement of the Influence of Road Surface on Traffic Noise - Part 1 Statistics Pass-by Method《声学 路面对交通噪声影响的测量 第1部分 统计旁路法》.pdf

《EN ISO 11819-1-2001 en Acoustics - Measurement of the Influence of Road Surface on Traffic Noise - Part 1 Statistics Pass-by Method《声学 路面对交通噪声影响的测量 第1部分 统计旁路法》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11819-1-2001 en Acoustics - Measurement of the Influence of Road Surface on Traffic Noise - Part 1 Statistics Pass-by Method《声学 路面对交通噪声影响的测量 第1部分 统计旁路法》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 11819-1:2001 Incorporating Amendment No. 1 to BS ISO 11819-1:1997 (renumbers the BS ISO as BS EN ISO 11819-1: 2001) Acoustics Measurement of the influence of road surfaces on traffic noise Part 1: Statistical Pass-By method The European Standard EN ISO 11819-1:2001 has the

2、 status of a British Standard ICS 17.140.30; 93.080.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN ISO 11819-1:2001 This British Standard, having been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the

3、 Standards Committee and comes into effect on 15 April 2000 BSI 28 March 2002 ISBN 0 580 35855 0 National foreword This British Standard is the official English language version of EN ISO 11819-1:2001. It is identical with ISO 11819-1:1997. The UK participation in its preparation was entrusted by Te

4、chnical Committee EH/1, Acoustics, to Subcommittee EH/1/2, Traffic noise, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publicatio

5、ns referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provision

6、s of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpreta

7、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page

8、, pages ii and iii, a blank page, pages 1 to 27 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 13621 28 March 2002 Implementation of the European StandardEUROPEANSTANDARD NORM

9、EEUROPENNE EUROPISCHENORM ENISO118191 August2001 ICS17.140.30 Englishversion AcousticsMeasurementoftheinfluenceofroadsurfaceson trafficnoisePart1:StatisticalPassBymethod(ISO11819 1:1997) AcoustiqueMesuragedelinfluencedesrevtements chaussessurlebruitmisparlacirculationPartie1: Mthodestatistiqueaupass

10、age(ISO118191:1997) AkustikMessungdesEinflussesvonStraenoberflchen aufVerkehrsgeruscheTeil1:Statistisches Vorbeifahrtverfahrtverfahren(ISO118191:1997) ThisEuropeanStandardwasapprovedbyCENon11June2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgiving

11、thisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyothe

12、rlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Neth

13、erlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. R

14、ef.No.ENISO118191:2001E2 INESO11918:1002(1E) Foreword ThetextoftheInternationalStandardfromTechnicalCommitteeISO/TC43“Acoustics“ofthe InternationalOrganizationforStandardization(ISO)hasbeentakenoverasanEuropean StandardbyTechnicalCommitteeCEN/TC227“Roadmaterials“,thesecretariatofwhichisheld byDIN. T

15、hisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltextorbyendorsement,atthelatestbyFebruary2002,andconflictingnational standardsshallbewithdrawnatthelatestbyFebruary2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefo

16、llowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg, Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdom. NOTEFROMCMCTheforewordissusceptibletobeamendedonreceptionoftheGerman

17、language version.Theconfirmedoramendedforeword,andwhenappropriate,thenormativeannexZAforthe referencestointernationalpublicationswiththeirrelevantEuropeanpublicationswillbecirculatedwiththe Germanversion. Erodnseemcitontne TxetehtfonIehtretnatoianSltnaradIdSO118191:1799sahbneeparpvodebyNECsaa ruEopn

18、aetSdnaradhtiwtuonaymfidoicanoit. ENISO118191:200144egaP ENISO118191:20010SI )E(7991:1=91811 Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried

19、 out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. IS

20、0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires appr

21、oval by at least 75 % of the member bodies casting a vote. International Standard IS0 118194 was prepared by Technical Committee ISOmC 43, Acoustics, Subcommittee SC 1, Noise. IS0 11819 consists of the following parts, under the general title Acoustics - Measurement of the influence of road surfaces

22、 on traffic noise: - Part I: Statistical Pass-By method - Part 2: Close-proximity method Annexes A to F of this part of IS0 11819 are for information only. llA sthgir .devreser sselnU esiwrehto ,deificeps on trap fo siht noitacilbup yam eb decudorper ro dezilitu ni yna mrof ro yb yna ,snaem cinortce

23、le ro ,lacinahcem gnidulcni gniypocotohp dna ,mliforcim tuohtiw noissimrep ni gnitirw morf eht .rehsilbup lanoitanretnI noitazinagrO rof noitazidradnatS esaC elatsop 65 l 1121-HC eveneG 02 l dnalreztiwS tenretnI lartnec hc.osi 004.x ;hc=c ;ten004=a ;osi=p ;scosi=o lartnec=s detnirP ni dnalreztiwS ii

24、 ENISO11819:20011egaP ENISO118191:2001Page2 1002:191811OSINE2egaP ENISO118191:2001(7991:1-91811OSI )E Introduction The emission and propagation of road traffic noise greatly depend on road surface characteristics, notably on texture and porosity. Both these characteristics influence the generation o

25、f tyre/road noise and, in addition, the porosity can influence the propagation of sound, particularly when the propagation takes place close to the surface. Power unit noise, which is usually generated at a greater height above the road surface than tyre/road noise, may also be affected during propa

26、gation by the porosity characteristics of the road surface. These effects lead to differences in sound levels, associated with a given traffic flow and composition, from different road surfaces of up to 15 dB, which can have a substantial impact on the environmental quality alongside a road. It is t

27、herefore important to be able to measure this influence by a standardized method and to arrive at a quantitative ranking of road surfaces with respect to traffic noise. This part of IS0 11819 offers such a method, the objective of which is to satisfy a need expressed by road planners, road administr

28、ators, contractors, manufacturers of so-called “low-noise surfaces” and by other parties concerned with the prediction and control of road traffic noise. ENISO11819:20011egaP ENISO118191:2001blank1002:191811OSINE1 ENISO118191:200111002:191811OSINE2 ENISO118191:200121002:191811OSINE3 ENISO118191:2001

29、31002:191811OSINE4 ENISO118191:200141002:191811OSINE5 ENISO118191:200151002:191811OSINE6 ENISO118191:200161002:191811OSINE7 ENISO118191:200171002:191811OSINE8 ENISO118191:200181002:191811OSINE9 ENISO118191:200191002:191811OSINE01 ENISO118191:2001101002:191811OSINE11 ENISO118191:2001111002:191811OSIN

30、E21 ENISO118191:2001121002:191811OSINE31 ENISO118191:2001131002:191811OSINE41 ENISO118191:2001141002:191811OSINE51 ENISO118191:2001151002:191811OSINE61 ENISO118191:2001161002:191811OSINE71 ENISO118191:2001171002:191811OSINE81 ENISO118191:2001181002:191811OSINE91 ENISO118191:2001191002:191811OSINE02

31、ENISO118191:2001201002:191811OSINE12 ENISO118191:2001211002:191811OSINE22 ENISO118191:2001221002:191811OSINE32 ENISO118191:2001231002:191811OSINE42 ENISO118191:2001241002:191811OSINE52 ENISO118191:2001251002:191811OSINE62 ENISO118191:2001261002:191811OSINE72 ENISO118191:200127BS EN ISO 11819-1:2001

32、BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards

33、 are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using thi

34、s British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automat

35、ically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at

36、 http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and intern

37、ational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.

38、Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Infor

39、mation regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publi

40、cations of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written perm

41、ission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.