EN ISO 11127-2-2011 en Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 Determina.pdf

《EN ISO 11127-2-2011 en Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 Determina.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11127-2-2011 en Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 Determina.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11127-2:2011Preparation of steel substrates before application of paints and related products T e s t m e t h o d s f o r n o n - m e t a l l i c blast-cleaning abrasiv

2、esPart 2: Determination of particle size distribution (ISO/FDIS 11127-2:2011)BS EN ISO 11127-2:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 11127-2:2011. It supersedes BS EN ISO 11127-2:1998, which is withdrawn.The UK participation in its preparation

3、 was entrusted to Technical Committee STI/21, Surface preparation of steel.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

4、application. BSI 2011 ISBN 978 0 580 67863 9 ICS 25.220.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDat

5、e Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11127-2 December 2011 ICS 25.220.10 Supersedes EN ISO 11127-2:1997English Version Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part

6、2: Determination of particle size distribution (ISO 11127-2:2011) Prparation des subjectiles dacier avant application de peintures et de produits assimils - Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection - Partie 2 : Analyse granulomtrique (ISO 11127-2:2011) Vorbere

7、itung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Prfverfahren fr nichtmetallische Strahlmittel - Teil 2: Bestimmung der Korngrenverteilungen (ISO 11127-2:2011) This European Standard was approved by CEN on 14 December 2011. CEN members are bound to comply with the CEN/CENELEC I

8、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to

9、any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official

10、 versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki

11、a, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide fo

12、r CEN national Members. Ref. No. EN ISO 11127-2:2011: EBS EN ISO 11127-2:2011 EN ISO 11127-2:2011 (E) 3 Foreword This document (EN ISO 11127-2:2011) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” t

13、he secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is dr

14、awn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11127-2:1997. According to the CEN/CENELEC Internal Regulations, the

15、national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

16、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11127-2:2011 has been approved by CEN as a EN ISO 11127-2:2011 without any modification. BS EN ISO 11127-2:2011ForewordISO (the International Organization

17、 for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has

18、the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.Interna

19、tional Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication

20、 as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.I

21、SO 11127-2 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products.This second edition cancels and replaces the first edition (ISO 11127-2:1993), which has been revised to update the st

22、ructure of ISO 11126 and ISO 11127 presented in Annex A.ISO 11127 consists of the following parts, under the general title Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives : Part 1: Sampling Part 2: Determination

23、 of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determination of water-soluble contaminants by conductivity measurement Part 7: Determination of water-soluble chloridesISO 11127-2:

24、2011(E) ISO 2011 All rights reserved iiiBS EN ISO 11127-2:2011BS EN ISO 11127-2:2011INTERNATIONAL STANDARD ISO 11127-2:2011(E)Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 2:Determination of particle size

25、 distribution1 ScopeThis is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.The types of non-metallic abrasive and requirements on each are contained in ISO 11126.The ISO 11126 and ISO 11127 series have been drafted as a cohere

26、nt set of International Standards on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.This part of ISO 11127 specifies a method for the determination of the particle size distribution of non-metallic blast-cleaning abrasives by sieving.2 Normative re

27、ferencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 565:1990, Test sieves Metal wire cloth

28、, perforated metal plate and electroformed sheet Nominal sizes of openingsISO 11127-1, Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling3 ApparatusOrdinary laboratory apparatus and glassware, toge

29、ther with the following:3.1 Test sieves, circular, with a height of between 25 mm and 50 mm and a sieving area approximately 200 mm in diameter, made of woven metal wire cloth. The frame of the test sieves shall be made of metaI. The range of nominal mesh apertures depends on the specification for t

30、he product to be tested and shall comply with the requirements of Table 2 in ISO 565:1990, as indicated in Table 1. The sieves shall have square openings. A lid and a residue pan shall also be provided.NOTE Smaller-diameter sieves might not produce accurate separation of the sample.Sieves shall be r

31、egularly checked for calibration and freedom from retained abrasive. ISO 2011 All rights reserved 1BS EN ISO 11127-2:2011Table 1 List of sieve mesh apertures to be used(from ISO 565:1990; R20/3 and R20 sizes)mm mm mm mm0,036 0,112 0,355 1,120,040 0,125 0,400 1,250,045 0,140 0,450 1,400,050 0,160 0,5

32、00 1,600,056 0,180 0,560 1,800,063 0,200 0,630 2,000,071 0,224 0,710 2,240,080 0,250 0,800 2.500,090 0,280 0,900 2,800,100 0,315 1,00 3,153.2 Rotating sieve machine, for agitating the sieves with the sample at a frequency of rotation of approximately 300 min1and provided with a timer for time period

33、s of up to 30 min in 1 min intervals.Other sieve machines may be used provided the same results are obtained.3.3 Balance, capable of weighing to an accuracy of 0,1 g.4 SamplingTake a representative sample of the product to be tested, as described in ISO 11127-1.5 Procedure5.1 Carry out the determina

34、tion in duplicate.5.2 Weigh out, to the nearest 0,1 g, a test portion of approximately 300 g of the sample (m0).5.3 Use all the test sieves listed against the grade under test as given in the grade and screening specification table in the appropriate part of ISO 11126 (see Annex A) or, in the case o

35、f materials not covered by ISO 11126, as otherwise agreed between the interested parties.5.4 Arrange the test sieves (3.1) with the largest-aperture sieve on the top and progress to the smallest aperture at the bottom, with a pan to catch any abrasive that falls through the finest sieve.5.5 Place th

36、e test portion in the top sieve.5.6 Place a cover over the top sieve.5.7 Place the stack of sieves with the test portion in the rotating sieve machine (3.2) and operate the sieve machine for 15 min.5.8 Carefully remove the top sieve from the stack and transfer any retained abrasive on to the balance

37、 pan. Brush the sieve clean of any trapped abrasive and add this to the balance pan. Weigh to the nearest 0,1 g and record this result (m1). Repeat for all the sieves in the stack, including the retaining pan.ISO 11127-2:2011(E)2 ISO 2011 All rights reservedBS EN ISO 11127-2:20116 Expression of resu

38、ltsFor each test sieve used, and for the residue in the pan, calculate the percentage of material retained R, expressed as a percentage by mass, using the equationRmm= 10100wherem0is the mass, in grams, of the test portion;m1is the mass, in grams, of the residue on the sieve (or in the pan).If the d

39、uplicate determinations differ by more than 10 % (relative to the higher result), repeat the procedure described in Clause 5.Calculate the mean of two valid determinations and report the result to the nearest 1 %.7 Test reportThe test report shall contain at least the following information:a) all de

40、tails necessary to identify the product tested, in accordance with the appropriate part of ISO 11126 (see Annex A), if applicable;b) a reference to this part of ISO 11127 (ISO 11127-2);c) the result of the test;d) any deviation from the test method specified;e) the date of the test;f) the name of th

41、e person who carried out the test.ISO 11127-2:2011(E) ISO 2011 All rights reserved 3BS EN ISO 11127-2:2011Annex A (informative) International Standards for non-metallic blast-cleaning abrasivesRequirements and test methods for non-metallic blast-cleaning abrasives are contained in ISO 11126 and ISO

42、11127, respectively.ISO 11126 consists of the following parts under the general title:Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification Part 3: Copper refinery sla

43、g Part 4: Coal furnace slag Part 5: Nickel refinery slag Part 6: Iron furnace slag Part 7: Fused aluminium oxide Part 8: Olivine sand Part 9: Staurolite Part 10: Almandite garnetISO 11127 consists of the following parts, under the general title:Preparation of steel substrates before application of p

44、aints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determinatio

45、n of water-soluble contaminants by conductivity measurement Part 7: Determination of water-soluble chloridesISO 11127-2:2011(E)4 ISO 2011 All rights reservedBS EN ISO 11127-2:2011This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for pr

46、eparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chis

47、wick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ice

48、s. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an

49、 individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be a