EN ISO 10563-2005 en Building construction - Sealants - Determination of change in mass and volume《房屋建筑 密封胶 质量和体积变化的测定 (ISO 10563)-2005》.pdf

《EN ISO 10563-2005 en Building construction - Sealants - Determination of change in mass and volume《房屋建筑 密封胶 质量和体积变化的测定 (ISO 10563)-2005》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10563-2005 en Building construction - Sealants - Determination of change in mass and volume《房屋建筑 密封胶 质量和体积变化的测定 (ISO 10563)-2005》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 10563:2005 Building construction Sealants Determination of change in mass and volume The European Standard EN ISO 10563:2005 has the status of a British Standard ICS 91.100.50 BS EN ISO 10563:2005 This British Standard was published under the authority of the Standards Pol

2、icy and Strategy Committee on 18 November 2005 BSI 18 November 2005 ISBN 0 580 46640 X National foreword This British Standard is the official English language version of EN ISO 10563:2005. It is identical with ISO 10563:2005. It supersedes BS EN ISO 10563:1998 which is withdrawn. The UK participati

3、on in its preparation was entrusted to Technical Committee B/547, Sealants for building and construction, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement interna

4、tional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purpor

5、t to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee

6、any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO forewo

7、rd page, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO1

8、0563 July2005 ICS91.100.50 SupersedesENISO10563:1997 EnglishVersion BuildingconstructionSealantsDeterminationofchangein massandvolume(ISO10563:2005) ConstructionimmobilireMasticsDterminationdes variationsdemasseetdevolume(ISO10563:2005) HochbauFugendichtstoffeBestimmungdernderung vonMasseundVolumen(

9、ISO10563:2005) ThisEuropeanStandardwasapprovedbyCENon27June2005. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational

10、standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast

11、heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKi

12、ngdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO10563:2005:E Foreword This document (EN ISO 1056

13、3:2005) has been prepared by Technical Committee ISO/TC 59 “Building construction“ in collaboration with CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2006, and conflicting national

14、 standards shall be withdrawn at the latest by January 2006. This document supersedes EN ISO 10563:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech R

15、epublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10563:2005 has been approv

16、ed by CEN as EN ISO 10563:2005 without any modifications. EN ISO 10563:2005 Reference number ISO 10563:2005(E)INTERNATIONAL STANDARD ISO 10563 Second edition 2005-07-01 Building construction Sealants Determination of change in mass and volume Construction immobilire Mastics Dtermination des variatio

17、ns de masse et de volume EN ISO 10563:2005ii iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each

18、member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International

19、 Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards

20、adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of

21、patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10563 was prepared by Technical Committee ISO/TC 59, Building construction, Subcommittee SC 8, Jointing products. This second edition cancels and replaces the first edition (ISO 10563:1991), Clauses 5

22、 and 6 of which have been technically revised. EN ISO 10563:2005blank1 Building construction Sealants Determination of change in mass and volume 1 Scope This International Standard specifies a method for the determination of the change of mass and the change of volume of sealants used in joints in b

23、uilding construction. This International Standard is not suitable for self- levelling sealants. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest e

24、dition of the referenced document (including any amendments) applies. ISO 6927, Building construction Jointing products Sealants Vocabulary 3 Terms and definitions For the purposes of this International Standard, the definitions given in ISO 6927 apply. 4 Principle Test specimens consisting of metal

25、 rings filled with the sealant to be tested are submitted to room temperature and to elevated temperature. The differences between the masses and/or the volumes of the test specimens measured before and after exposure to the temperatures are recorded. 5 Apparatus and materials 5.1 Rings of non-corro

26、sive metal, having the following approximate dimensions: outer diameter, 34 mm; inner diameter, 30 mm; height, 10 mm. A hook or loop is fixed to each ring to suspend it from a string for the weighing procedure. 5.2 Anti-adherent substrate, for the preparation of test specimens. EXAMPLE Wet paper. 5.

27、3 Conditioning chamber, capable of being controlled at (23 2) C and (50 5) % relative humidity. 5.4 Ventilated oven, capable of being controlled at (70 2) C. 5.5 Balance, with an accuracy of 0,01 g, capable of being used to weigh the test specimens in air and immersed in water. 5.6 Test liquid, at a

28、 temperature of (23 2) C, consisting of water with the addition of up to 0,25 % (by mass) of a low-foam surfactant. In the case of water-sensitive sealants, laboratory grade 2,2,4-trimethylpentane (iso-octane) shall be used. 5.7 Container, for the immersion of the test specimens in the test liquid.

29、EN ISO 10563:2005EN ISO 10563:2005 2 6 Preparation of test specimens 6.1 The sealant and the metal rings shall be brought to (23 2) C. Three test specimens shall be prepared for each property to be tested. 6.2 Each metal ring shall be weighed in air (mass m 1 ) using the balance (5.5), and, for the

30、volume test, also in the test liquid (5.6) (mass m 2 ). 6.3 The rings shall be set on the anti-adherent substrate (5.2) and filled with the sealant to be tested using the following procedure. a) The formation of air bubbles shall be avoided. b) The sealant shall be pressed on the inner surfaces of t

31、he metal rings. c) The sealant surface shall be trimmed so that it is flush with the upper rim of the metal rings. d) The test specimens shall be removed immediately from the anti-adherent substrate such that the reverse side of the sealant is flush. e) The filled rings (see also 6.2) shall be weigh

32、ed immediately in air (mass m 3 ) and for the volume change also in the test liquid (mass m 4 ). For water-borne sealants, these measurements shall be carried out after 60 min and shall be completed within 30 s. 7 Test procedure After preparation and weighing, the test specimens shall be suspended v

33、ertically and then stored under the following conditions, in the sequence given: a) 28 days in the conditioning chamber (5.3) at (23 2) C and (50 5) % relative humidity; b) 7 days at (70 2) C in the oven (5.4); c) 1 day in the conditioning chamber (5.3) at (23 2) C and (50 5) % relative humidity. Fo

34、llowing storage, the test specimens shall be weighed immediately in air (mass m 5 ) and, for the volume change, also in the test liquid (mass m 6 ). 8 Calculation and expression of results 8.1 Change in mass For each test specimen, the change in mass, m, expressed as a percentage, shall be calculate

35、d using the following equation: 5 3 3 1 100 m m m m m = (1) where m 1is the mass, expressed in grams, of the metal ring before filling with the sealant, measured in air (see 6.2); m 3is the mass, expressed in grams, of the test specimen immediately after preparation, measured in air (see 6.3); EN IS

36、O 10563:20053 m 5is the mass, expressed in grams, of the test specimen immediately after conditioning, measured in air (see Clause 7). The arithmetic mean of the change in mass of the three specimens shall be taken as the test result, rounded to the nearest 0,1 %. 8.2 Change in volume For each test

37、specimen, the change in volume, V, expressed as a percentage, shall be calculated using the following equation: 5 634 3412 () () 100 () () mmmm V mmmm = (2) where m 2is the mass, expressed in grams, of the metal ring before filling with the sealant, measured in the test liquid (see 6.2); m 4is the m

38、ass, expressed in grams, of the test specimen immediately after preparation, measured in the test liquid (see 6.3); m 6is the mass, expressed in grams, immediately after conditioning, measured in the test liquid (see Clause 7); m 1 , m 3 , m 5are defined in 8.1. The arithmetic mean of the change in

39、volume of the three specimens shall be taken as the test result, rounded to the nearest 0,1 %. 9 Test report The test report shall include the following information: a) test laboratorys name and date of test; b) reference to this International Standard; c) name, type (chemical family) and colour of

40、sealant; d) batch of sealant from which the test specimens were produced; e) individual values of the change in mass and volume for each test specimen and the arithmetic means of the change in mass and/or the change in volume, as a percentage; f) any deviations from the specified test conditions. BS

41、 EN ISO 10563:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revision

42、s British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambigu

43、ity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that

44、subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from

45、 the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national,

46、European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048

47、. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: me

48、mbershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copy