EN ISO 10554-2009 en Polyamide fibre ropes - Double braid construction《聚酰胺纤维绳索 双层编织结构》.pdf

《EN ISO 10554-2009 en Polyamide fibre ropes - Double braid construction《聚酰胺纤维绳索 双层编织结构》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10554-2009 en Polyamide fibre ropes - Double braid construction《聚酰胺纤维绳索 双层编织结构》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 10554:2009ICS 59.080.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPolyamide fibre ropes Double braid constructionIncorporating corrigendum April 2010National forewordThis British Standard is the UK implementation of EN ISO 10554:2009. It is identi

2、cal to ISO 10554:2009. It supersedes BS EN 14685:2004 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/77, Ropes and cordage and fishing nets.A list of organizations represented on this committee can be obtained on request to its secretary.This publ

3、ication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN ISO 10554:2009This British Standard was published under the authority of the Standa

4、rds Policy and Strategy Committee on 31 January 2010 BSI 2010Amendments/corrigenda issued since publicationDate Comments 30 April 2010 Supersession text added; Incorporating CEN correction notice 27 January 2010ISBN 978 0 580 70475 8EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10554 Dece

5、mber 2009 ICS 59.080.50 English Version Polyamide fibre ropes - Double braid construction (ISO 10554:2009) Cordages en fibres de polyamide - Cordages coaxiaux (ISO 10554:2009) Polyamid-Faserseile - Doppelgeflechtausfhrung (ISO 10554:2009) This European Standard was approved by CEN on 4 November 2009

6、. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on

7、 application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Ce

8、ntre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol

9、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by

10、any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10554:2009: E3 Foreword This document (EN ISO 10554:2009) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which

11、 is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility

12、that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound

13、 to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swi

14、tzerland and the United Kingdom. Endorsement notice The text of ISO 10554:2009 has been approved by CEN as a EN ISO 10554:2009 without any modification. The CEN correction notice 27 January 2010 provided a revised English language text incorporating the following editorial corrections:This document

15、supersedes EN 14685:2004. BS EN ISO 10554:2009EN ISO 10554:2009 (E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally

16、carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the wo

17、rk. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Inte

18、rnational Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of t

19、he elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10554 was prepared by Technical Committee ISO/TC 38, Textiles. BS EN ISO 10554:2009EN ISO 10554:2009 (E)INTERNATIONAL STANDARD ISO 2009 All rights re

20、served 1Polyamide fibre ropes Double braid construction 1 Scope This International Standard specifies requirements for double braided ropes and for higher-strength double braided ropes made of polyamide and gives rules for their designation. 2 Normative references The following referenced documents

21、are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1968, Fibre ropes and cordage Vocabulary ISO 2307, Fibre ropes Determination of

22、certain physical and mechanical properties ISO 9554:2005, Fibre ropes General specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 1968 apply. 4 Designation Fibre ropes shall be designated by the following: the words “fibre rope”; the numbe

23、r of this International Standard; the reference number of the rope; the material from which the rope is made; the level of performance of rope: double braided rope or higher-strength (hs) double braided rope. EXAMPLE 1 Designation of a double braided rope, reference number 20, corresponding to a lin

24、ear density of 249 ktex made of polyamide: Fibre rope ISO 10554 - 20 - PA EXAMPLE 2 Designation of a higher-strength (hs) double braided rope, reference number 20, corresponding to a linear density of 249 ktex made of polyamide: Fibre rope ISO 10554 - 20 - PA (hs) EN ISO 10554:2009 (E)BS EN ISO 1055

25、4:20092 ISO 2009 All rights reserved5 Material The mixing of polyamide fibre types and grades shall not be permitted. 6 General requirements 6.1 Construction Ropes produced according to this International Standard shall be constructed in the following way. The rope (see Figure 1) shall be of a doubl

26、e braided construction wherein an inner braid of hollow structure manufactured in a separate operation shall serve as the core, while a cover (outer braid) is braided over it in a second operation. The weight of either the inner braid or the outer braid shall not exceed 55 % of the total weight of t

27、he rope. It shall also conform to ISO 9554. Figure 1 Shape of a polyamide double braided rope and of a polyamide higher-strength double braided rope 6.2 Number of strands For ropes of reference number from 6 to 16: the minimum number of strands of outer braid shall be 16. For ropes of reference numb

28、er greater than 16: the minimum number of strands of outer braid shall be 24. 6.3 Manufacture, labelling and packaging Manufacture, labelling, packaging, invoicing and delivery lengths shall conform to ISO 9554. 6.4 Strand interchange 6.4.1 Strand interchange shall be the overlapping continuation of

29、 a single interrupted strand (or multiple strand) with another identical strand which follows the identical path in the braid. Although it is desirable that no strand interchange be present in the core or the cover of any size and length of rope, some methods of manufacture impose limitations. To co

30、mpensate for these limitations, strand interchange shall be in accordance with 6.4.2 to 6.4.5. 6.4.2 To allow for a braider malfunction, one strand interchange shall be permitted in the core and one in the cover for a standard length of 200 m or less. 6.4.3 For lengths greater than 200 m, additional

31、 strand interchanges shall be permitted if deemed necessary by the manufacturer. 6.4.4 In producing the strand interchanges the distance of the overlapping shall be equivalent to 8 times the rope size number but not less than 600 mm for ropes whose reference numbers are 72 and less. Strand interchan

32、ges shall be at least 12 m apart measured from interchange centre to interchange centre. 6.4.5 Because strand interchanges within the core are difficult to detect after application of the cover, a record of verifiable information attesting to the number of strand interchanges shall be available to a

33、n inspector. BS EN ISO 10554:2009EN ISO 10554:2009 (E) ISO 2009 All rights reserved 37 Physical properties The linear density and minimum breaking force shall conform to Table 1. Table 1 Linear density and minimum breaking force of polyamide double braided rope and polyamide higher-strength double b

34、raided rope Linear densitybcMinimum breaking forcede kN Reference numberaNominal ktex Tolerance % Double braided rope Higher-strength double braided rope Unspliced ropes Ropes with eye-spliced terminations Unspliced ropes Ropes with eye-spliced terminations 6 22,4 6,58 5,92 7,89 7,10 8 39,8 10 11,7

35、10,5 14,0 12,6 10 62,2 18,2 16,4 21,8 19,6 12 89,6 8 26,1 23,5 31,3 28,2 14 122 35,4 31,9 42,5 38,3 16 159 46,1 41,5 55,3 49,8 18 202 58,3 52,5 69,9 62,9 20 249 71,8 64,6 86,2 77,6 22 301 86,7 78,0 104 94 24 358 103 93 124 112 26 420 121 109 145 131 28 488 140 126 168 151 30 560 161 145 193 174 32 6

36、37 183 165 219 197 36 806 231 208 277 249 40 995 284 256 341 307 44 1 200 343 309 412 371 48 1 430 408 367 490 441 52 1 680 5 478 430 574 517 56 1 950 554 499 665 598 60 2 240 635 572 762 686 64 2 550 723 651 867 780 72 3 220 917 825 1 100 990 80 3 980 1 130 1 017 1 350 1 220 88 4 820 1 360 1 224 1

37、630 1 470 96 5 730 1 620 1 458 1 940 1 750 104 6 730 1 890 1 701 2 270 2 040 112 7 800 2 190 1 971 2 630 2 370 120 8 960 2 520 2 268 3 020 2 720 128 10 200 2 860 2 574 3 430 3 090 BS EN ISO 10554:2009EN ISO 10554:2009 (E)4 ISO 2009 All rights reservedTable 1 (continued) Linear densitybcMinimum break

38、ing forcede kN Reference numberaNominal ktex Tolerance % Double braided rope Higher-strength double braided rope Unspliced ropes Ropes with eye-spliced terminations Unspliced ropes Ropes with eye-spliced terminations 144 12 900 3 620 3 258 4 340 3 910 168 17 600 4 890 4 401 5 870 5 280 192 22 900 5

39、6 390 5 751 7 670 6 900 216 29 000 8 040 5 236 9 650 8 700 240 35 800 9 920 8 928 11 900 10 700 aThe reference number corresponds to the approximate diameter, in millimetres. bThe linear density, in kilotex, corresponds to the net mass per length of the rope, expressed in grams per metre or in kilog

40、rams per kilometre. cThe linear density is obtained under reference tension and is measured as specified in ISO 2307.dThe breaking forces relate to new, dry ropes. In wet conditions, these values may be lowered.eA force determined by the test methods specified in ISO 2307 is not necessarily an accur

41、ate indication of the force at which that rope might break in other circumstances and situations. The type and quality of terminations, the rate of force application, prior conditioning and previous force applications to the rope can significantly influence the breaking force. A rope bent around a p

42、ost, capstan, pulley or sheave may break at a significantly lower force. A knot or other distortion in a rope may significantly reduce the breaking force. 8 Marking 8.1 Polyamide double braided ropes The marking of polyamide double braided ropes shall be carried out in accordance with Clause 6 of IS

43、O 9554:2005. 8.2 Polyamide higher-strength double braided ropes 8.2.1 For higher-strength ropes with a reference number of less than 14, a central marker yarn in green shall be incorporated into the centre of the rope. 8.2.2 For higher-strength ropes with a reference number greater than or equal to

44、14, the quality identification on the marker tape shall indicate higher strength (hs). BS EN ISO 10554:2009EN ISO 10554:2009 (E)BSI GroupHeadquarters 389 Chiswick High Road, London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 standardsBSI - British Standards InstitutionBSI is the ind

45、ependent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that the

46、y possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the id

47、entity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, internati

48、onal and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to

49、 supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996