EN ISO 10077-2-2012 en Thermal performance of windows doors and shutters - Calculation of thermal transmittance - Part 2 Numerical method for frames (Incorporating corrigendum July.pdf

《EN ISO 10077-2-2012 en Thermal performance of windows doors and shutters - Calculation of thermal transmittance - Part 2 Numerical method for frames (Incorporating corrigendum July.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10077-2-2012 en Thermal performance of windows doors and shutters - Calculation of thermal transmittance - Part 2 Numerical method for frames (Incorporating corrigendum July.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationThermal performance of windows, doors and shutters Calculationof thermal transmittancePart 2: Numerical method for frames BS EN ISO 10077-2:2012Incorporating corrigendum July 201

2、2BS EN ISO 10077-2:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 10077-2:2012. Itis identical to ISO 10077-2:2012, incorporating corrigendum July 2012. It supersedes BS EN ISO 10077-2:2003, which is withdrawn.The UK participation in its preparation wa

3、s entrusted to Technical Committee B/540, Energy performance of materials,components and buildings.A list of organizations represented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are respon

4、sible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 80255 3ICS 91.060.50; 91.120.10Compliance with a British Standard cannot confer immunityfrom legal obligations.This British Standard was published under the authority of th

5、e Standards Policy and Strategy Committee on 30 April 2012.Amendments/corrigenda issued since publicationDate Text affected30 April 2013 Implementation of ISO corrigendum July 2012:Subclauses 6.3.2.1 and 6.3.3 modifiedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10077-2 April 2012 ICS 91

6、.060.50; 91.120.10 Supersedes EN ISO 10077-2:2003English Version Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2012) Performance thermique des fentres, portes et fermetures -Calcul du coefficient de transm

7、ission thermique - Partie 2: Mthode numrique pour les encadrements (ISO 10077-2:2012) Wrmetechnisches Verhalten von Fenstern, Tren und Abschlssen - Berechnung des Wrmedurchgangskoeffizienten - Teil 2: Numerisches Verfahren fr Rahmen (ISO 10077-2:2012) This European Standard was approved by CEN on 29

8、 February 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

9、be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

10、 the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe

11、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN

12、 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10077-2:2012: EIncorporating corrigendum July 2012BS EN ISO 10077-2:2012EN ISO 10077-2:2012 (E) 3 Foreword This document (EN ISO 10077-2:2012) has been prepared by Technical Committe

13、e ISO/TC 163 “Thermal performance and energy use in the built environment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard,

14、either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN an

15、d/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10077-2:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Au

16、stria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

17、 Kingdom. Endorsement notice The text of ISO 10077-2:2011 has been approved by CEN as a EN ISO 10077-2:2012 without any modification. BS EN ISO 10077-2:2012EN ISO 10077-2:2012 (E) 3 Foreword This document (EN ISO 10077-2:2012) has been prepared by Technical Committee ISO/TC 163 “Thermal performance

18、and energy use in the built environment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identi

19、cal text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held res

20、ponsible for identifying any or all such patent rights. This document supersedes EN ISO 10077-2:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

21、 Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The t

22、ext of ISO 10077-2:2011 has been approved by CEN as a EN ISO 10077-2:2012 without any modification. BS EN ISO 10077-2:2012EN ISO 10077-2:2012 (E) 3 Foreword This document (EN ISO 10077-2:2012) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built enviro

23、nment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

24、 latest by August 2012, and conflicting national standards shall be ithdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all

25、 such patent rights. This document supersedes EN ISO 10077-2:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E

26、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10077-2:2011 has been ap

27、proved by CEN as a EN ISO 10077-2:2012 without any modification. BS EN ISO 10077-2:2012ISO 10077-2:2012(E) ISO 2012 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope 12 Normative references . 13 Terms, definitions and symbols 14 Calculation method . 24.1 General principle . 24.2 V

28、alidation of the calculation programme 34.3 Determination of the thermal transmittance 35 Treatment of solid sections and boundaries . 35.1 Solid materials . 35.2 Emissivity of surfaces 35.3 Boundaries 45.4 Roller shutter boxes . 45.5 Extensions of window frame profiles 66 Treatment of cavities 66.1

29、 General . 66.2 Cavities in glazing . 66.3 Unventilated air cavities in frames and roller shutter boxes . 66.4 Ventilated air cavities and grooves 107 Report . 117.1 General . 117.2 Geometrical data .127.3 Thermal data .127.4 Results .12Annex A (informative) Thermal conductivity of selected material

30、s 13Annex B (normative) Surface resistances .15Annex C (normative) Determination of the thermal transmittance .17Annex D (normative) Examples for the validation of calculation programmes .21Annex E (informative) Wood species listed in Annex A .33Bibliography .36BS EN ISO 10077-2:2012ISO 10077-2:2012

31、(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a

32、 technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matte

33、rs of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulate

34、d to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible f

35、or identifying any or all such patent rights.ISO 10077-2 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN

36、/TC 89, Thermal performance of buildings and building components, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This International Standard is one of a series of standards on methods for the design and evaluation of the thermal performance of buildi

37、ng equipment and industrial installations.This second edition cancels and replaces the first edition (ISO 10077-2:2003), which has been technically revised. The main changes compared to the previous edition are given in the following table:Clause Changes5.1 Clarified use of measured data.5.4 Added c

38、alculation rules for roller shutter boxes and added new figure.5.5 Added calculation rules for extensions of window frame profiles and new added figure.Annex A Added Table A.2 Thermal conductivity of timber species.Annex A Added Table A.3 Typical emissivities of metallic surfaces.Annex B Added Table

39、 B.2 for roller shutter boxes.C.2 Added calculation rules for the combination of frame constructions with insulating glazing units (IGU) and Figure C.3 showing a representative metal spacer incorporated in an IGU.Annex D Updated Figures D.1 to D.10 for frame sections.ISO 10077 consists of the follow

40、ing parts, under the general title Thermal performance of windows, doors and shutters Calculation of thermal transmittance: Part 1: General Part 2: Numerical method for framesiv ISO 2012 All rights reservedBS EN ISO 10077-2:2012ISO 10077-2:2012(E)ForewordISO (the International Organization for Stand

41、ardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right

42、to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Sta

43、ndards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Int

44、ernational Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 10077-2

45、 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building co

46、mponents, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This International Standard is one of a series of standards on methods for the design and evaluation of the thermal performance of building equipment and industrial installations.This second ed

47、ition cancels and replaces the first edition (ISO 10077-2:2003), which has been technically revised. The main changes compared to the previous edition are given in the following table:Clause Changes5.1 Clarified use of measured data.5.4 Added calculation rules for roller shutter boxes and added new

48、figure.5.5 Added calculation rules for extensions of window frame profiles and new added figure.Annex A Added Table A.2 Thermal conductivity of timber species.Annex A Added Table A.3 Typical emissivities of metallic surfaces.Annex B Added Table B.2 for roller shutter boxes.C.2 Added calculation rule

49、s for the combination of frame constructions with insulating glazing units (IGU) and Figure C.3 showing a representative metal spacer incorporated in an IGU.Annex D Updated Figures D.1 to D.10 for frame sections.ISO 10077 consists of the following parts, under the general title Thermal performance of windows, doors and shutters Calculation of thermal transmittance: Part 1: General Part 2: Numerical method for framesiv ISO 2012 All rights reservedBS EN ISO 10077-2:2012ISO 10077-2:2012(E)IntroductionISO 10077 consists of two parts. The method