EN ISO 8130-5-2010 en Coating powders - Part 5 Determination of flow properties of a powder air mixture《家具面 第5部分 粉末空气混合物流动性的测定》.pdf
《EN ISO 8130-5-2010 en Coating powders - Part 5 Determination of flow properties of a powder air mixture《家具面 第5部分 粉末空气混合物流动性的测定》.pdf》由会员分享,可在线阅读,更多相关《EN ISO 8130-5-2010 en Coating powders - Part 5 Determination of flow properties of a powder air mixture《家具面 第5部分 粉末空气混合物流动性的测定》.pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARDBS EN ISO8130-5:2010Coating powders Part 5: Determination of flow properties of a powder/airmixture (ISO 8130-5:1992) Incorporating corrigendum April 2011ICS 87.040National forewordThis British Standard is the UK implementation of EN ISO 8130-5:2010. It is identical to ISO 8130-5:199
2、2. It supersedes BS 3900-J9:1993 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee STI/10, Test methods for paints.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to incl
3、ude all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN ISO 8130-5:2010This British Standard, having been prepared under the direction of the Pigments, Paints and Varnishe
4、s Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 April 1993 BSI 2011The following BSI references relate to the work on this standard: Committee reference PVC/10 Draft for comment 91/52158 DCAmendments/corrigenda issued since publicati
5、onDate Comments 30 April 2011 This corrigendum renumbers BS 3900-J9:1993 as BS EN ISO 8130-5:2010ISBN 978 0 580 72113 7EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8130-5 November 2010 ICS 87.040 English Version Coating powders - Part 5: Determination of flow properties of a powder/air m
6、ixture (ISO 8130-5:1992) Poudres pour revtement - Partie 5: Dtermination de laptitude la fluidisation dun mlange poudre/air (ISO 8130-5:1992) Pulverlacke - Teil 5: Bestimmung der Flieeigenschaften eines Pulver-Luft-Gemisches (ISO 8130-5:1992) This European Standard was approved by CEN on 16 October
7、2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine
8、d on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Managemen
9、t Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands
10、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any
11、 form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8130-5:2010: EForeword The text of ISO 8130-5:1992 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of the International Organization for Standardization (ISO) and has been taken over as EN I
12、SO 8130-5:2010 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national
13、standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC I
14、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu
15、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 8130-5:1992 has been approved by CEN as a EN ISO 8130-5:2010 without any modification. BS EN ISO 8130-5:2010EN ISO 8130-5:2010 (E
16、) BSI 2011 11 ScopeThis part of ISO8130 specifies a method for determining the flow properties of a mixture of coating powder and air. The method reflects commercial practice in powder spraying (see“Bibliography”, Annex B).The results obtained are influenced by the composition of the coating powder,
17、 its density, particle size distribution and particle shape, together with the tendency of the particles to agglomerate and to accept a triboelectric charge.NOTE 1It is well known that the transport and spraying characteristics of powders are highly dependent on their flow properties in bulk and in
18、air. The procedure described in this method is considered to be more meaningful than the “flow angle” approach sometimes used to evaluate bulk flow properties. In the latter, the angle of the cone formed when a powder is allowed to flow through a vertical funnel on to a horizontal surface is measure
19、d. A given mass of powder with good flow properties forms a shallower cone than an equal mass of a powder with poorer flow. The objections to the flow angle method are that it is difficult to obtain a precise measurement and that the powder is used alone, whereas during application it is mixed with
20、air.2 Normative referenceThe following standard contains provisions which, through reference in this text, constitute provisions of this part of ISO8130. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part o
21、f ISO8130 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.ISO 8130-9:1992, Coating powders Part9:Sampling. 3 PrincipleUnder draught-free conditions,
22、 a specified quantity of coating powder is placed in a vessel and is fluidized with clean dry air under standard conditions of atmospheric temperature and pressure. The height of the powder during and after fluidization is measured and the rate at which the fluidized powder flows through a specified
23、 orifice is then determined.The measurements are used to calculate the fluidization factor and the powder flow rate (flow factor) R which together define the transport and spraying characteristics of the powder.4 Apparatus4.1 Apparatus for the determination of flow properties, consisting of a fluidi
24、zation vessel with a circular opening in the wall and a device for measuring the height of powder in the vessel. A means for weighing the amount of powder that flows through the opening is also included.NOTE 2A suitable apparatus is shown in Figure 1 and described below. Other apparatus may be used
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ENISO813052010ENCOATINGPOWDERSPART5DETERMINATIONOFFLOWPROPERTIESOFAPOWDERAIRMIXTURE 家具 部分 粉末 空气 混合物 流动性
链接地址:http://www.mydoc123.com/p-723373.html