EN ISO 6330-2012 en Textiles - Domestic washing and drying procedures for textile testing《纺织品 纺织品的家庭洗涤和干燥试验规程》.pdf

《EN ISO 6330-2012 en Textiles - Domestic washing and drying procedures for textile testing《纺织品 纺织品的家庭洗涤和干燥试验规程》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 6330-2012 en Textiles - Domestic washing and drying procedures for textile testing《纺织品 纺织品的家庭洗涤和干燥试验规程》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 6330:2012Textiles Domestic washingand drying procedures fortextile testingBS EN ISO 6330:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implement

2、ation of EN ISO 6330:2012.It supersedes BS EN ISO 6330:2001+A1:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/82, Textiles care labelling, dry cleaning, domesticlaundering and drying.A list of organizations represented on this committee can be

3、obtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 70887 9ICS 59.080.01Compliance w

4、ith a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2012.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 633

5、0 April 2012 ICS 59.080.01 Supersedes EN ISO 6330:2000English Version Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) Textiles - Mthodes de lavage et de schage domestiques en vue des essais des textiles (ISO 6330:2012) Textilien - Nichtgewerbliche Wasch- und Tro

6、cknungsverfahren zur Prfung von Textilien (ISO 6330:2012) This European Standard was approved by CEN on 14 April 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without

7、any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other lang

8、uage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

9、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NOR

10、MALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6330:2012: EBS EN ISO 6330:2012EN ISO 6330:2012 (E) 3 Foreword This document (E

11、N ISO 6330:2012) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication

12、of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall n

13、ot be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 6330:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgari

14、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement n

15、otice The text of ISO 6330:2012 has been approved by CEN as a EN ISO 6330:2012 without any modification. BS EN ISO 6330:2012ISO 6330:2012(E) ISO 2012 All rights reserved iiiContents PageForeword . vIntroduction . vi1 Scope 12 Normative references . 13 Terms and definitions . 24 Principle . 25 Appara

16、tus and materials . 35.1 Automatic washing machines 35.2 Tumble dryers . 35.3 Electrically (dry) heated flat-bed press . 35.4 Line drying 35.5 Drying racks 35.6 Ballasts . 36 Reagents 46.1 Reference detergents . 46.2 Water . 57 Conditioning and testing atmosphere . 58 Wash load 58.1 Total wash load

17、58.2 Number of specimens 58.3 Selection of ballast . 58.4 Ratio of load to ballast . 59 Washing procedure . 610 Drying procedure . 610.1 Open-air dry 610.2 Tumble dry 711 Test report . 8Annex A (normative) Specification for reference washing machine Type A Horizontal axis, front-loading type 9Annex

18、B (normative) Specification for wash procedures for reference washing machine Type A 10Annex C (normative) Specification for reference washing machine Type B Vertical axis, top-loading agitator type 14Annex D (normative) Specification for washing procedures for reference washing machine Type B . 15A

19、nnex E (normative) Specification for reference washing machine Type C Vertical axis, top-loading pulsator type .17Annex F (normative) Specification for washing procedures for reference washing machine Type C 18Annex G (normative) Specification for tumble dryers 20Annex H (normative) Specifications f

20、or all ballast types used in washing 21Annex I (normative) Nominal percentage composition for non-phosphate powder reference detergent 1 .22Annex J (normative) Nominal percentage composition for non-phosphate reference detergent 2 24Annex K (normative) Nominal percentage composition for non-phosphat

21、e reference detergent 3 25Annex L (normative) Nominal percentage composition for reference detergent 4 26Annex M (normative) Nominal percentage composition for non-phosphate liquid reference detergent 5 27BS EN ISO 6330:2012ISO 6330:2012(E)iv ISO 2012 All rights reservedAnnex N (normative) Nominal p

22、ercentage composition for reference detergent 629Annex O (normative) Distribution and mixing of reference detergent 2, 3 or 6 30Annex P (normative) Determination of cycle drying time for tumble dryers with a timer device . 31Bibliography .33BS EN ISO 6330:2012ISO 6330:2012(E)ForewordISO (the Interna

23、tional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has be

24、en established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stan

25、dardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for

26、voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all s

27、uch patent rights.ISO 6330 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing, finishing and water resistance tests.This third edition cancels and replaces the second edition (ISO 6330:2000), which has been technically revised. It also incorporates ISO 6330:2000/Am

28、d.1:2008. ISO 2012 All rights reserved vBS EN ISO 6330:2012ISO 6330:2012(E)IntroductionThis International Standard is utilized by a broad range of textile quality and performance evaluations including but not exclusive to: smoothness appearance, dimensional change, stain release, water resistance, w

29、ater repellence, colour fastness to domestic laundering, and care labelling that are prescribed in other international and regional test method standards.This International Standard is also used to evaluate not only the attributes of fabrics themselves but also the performance of apparel, home produ

30、cts and other textile end-products. The selection of washing and drying machines and their associated ballast types, detergents, and other drying options are to be made according to the international region in which the textile will be used by consumers.NOTE Suitable machines, detergents and ballast

31、 are available commercially. If you need this information, please contact the ISO TC 38/SC 2 Secretariat.vi ISO 2012 All rights reservedBS EN ISO 6330:2012INTERNATIONAL STANDARD ISO 6330:2012(E)Textiles Domestic washing and drying procedures for textile testing1 Scope1.1 This International Standard

32、specifies domestic washing and drying procedures for textile testing. The procedures are applicable to textile fabrics, garments or other textile articles which are subjected to appropriate combinations of domestic washing and drying procedures. This International Standard also specifies the referen

33、ce detergents and ballasts for the procedures.1.2 Provision is made fora) 13 different washing procedures based on the use of the reference washing machine Type A: horizontal axis, front-loading type,b) 11 procedures based on the use of the reference washing machine Type B: vertical axis, top-loadin

34、g agitator type, andc) 7 procedures based on the use of the reference washing machine Type C: vertical axis, top-loading pulsator type.1.3 Each washing procedure represents a single domestic wash.1.4 This International Standard also specifies six drying procedures:A Line dryB Drip line dryC Flat dry

35、 D Drip flat dryE Flat pressF Tumble dry1.5 A complete test consists of a washing and drying procedure.NOTE Use of different parameters (washing machine type, detergent type and type of tumble drier) may affect test results for any test using this International Standard. Therefore, parties using thi

36、s standard are strongly encouraged to agree on the parameters to be used.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

37、 document (including any amendments) applies.ISO 6059, Water quality Determination of the sum of calcium and magnesium EDTA titrimetric methodISO 139, Textiles Standard atmospheres for conditioning and testing ISO 2012 All rights reserved 1BS EN ISO 6330:2012ISO 6330:2012(E)3 Terms and definitionsFo

38、r the purposes of this document, the following terms and definitions apply.3.1ambient conditionstemperature and relative humidity in the test environment not differing from the normal indoor condition or the normal outdoor condition in the region where the test is performed3.2ballasttextile load (co

39、tton, cotton/polyester or polyester) to be added to the specimen under test in order to achieve the specified weight in the reference washing machines3.3controlled humidity devicecontrol unit in a tumble dryer capable of measuring the humidity of the load and ending the drying operation at a predete

40、rmined residual moisture level3.4overdryingprolonged drying operation where the load is dried until all remaining moisture in the load has been removed3.5reference detergentdetergent with specified formulations to be used for testing purposes3.6reference washing machinewashing machine with defined e

41、ngineering specifications to be used for testing purposes3.7washing procedurecycle of the washing action including water supplying, washing, and repeated rinsing, spinning and water supplying and ended by spinning as predetermined on the washing machine3.8spinning processwater-extracting process in

42、the washing machine by which water is removed from the textiles by centrifugal action as a part of the washing procedure3.9still airair not influenced by any natural wind or mechanical device giving it a forced flow3.10total air-dry masstotal weight of the specimen under test and the ballast in a co

43、nditioned state according to ISO 1394 PrincipleA specimen is washed in an automatic washing machine and dried according to specified procedures.2 ISO 2012 All rights reservedBS EN ISO 6330:2012ISO 6330:2012(E)5 Apparatus and materials5.1 Automatic washing machines5.1.1 Reference washing machine Type

44、 A Horizontal axis, front-loading typeThe specification for reference washing machine Type A is given in Annex A.5.1.2 Reference washing machine Type B Vertical axis, top-loading agitator typeThe specification for reference washing machine Type B is given in Annex C.5.1.3 Reference washing machine T

45、ype C Vertical Axis, top-loading pulsator typeThe specification for reference washing machine Type C is given in Annex E.5.2 Tumble dryers5.2.1 Type A1 tumble dryer VentedThe specification for Type A1 tumble dryer is given in Annex G.5.2.2 Type A2 tumble dryer CondenserThe specification for Type A2

46、tumble dryer is given in Annex G.5.2.3 Type A3 tumble dryer Large ventedThe specification for Type A3 tumble dryer is given in Annex G.5.3 Electrically (dry) heated flat-bed pressIf this method of drying is used, the type of press shall be specified among the interested parties.5.4 Line dryingFor pr

47、ocedure for line drying, see 10.1.1; for drip line drying, see 10.1.2.5.5 Drying racksUse screen drying racks of approximately 16 mesh stainless steel or plastic for flat drying (see 10.1.3) or drip flat drying (see 10.1.4).5.6 Ballasts5.6.1 Type I, 100 % Cotton ballastThe nominal composition of 100

48、 % Cotton ballast is given in Annex H.5.6.2 Type II, 50 % Cotton/50 % Polyester ballastThe nominal composition of 50 % Cotton/50 % Polyester ballast is given in Annex H.5.6.3 Type III, 100 % Polyester ballastThe nominal composition of 100 % Polyester ballast is given in Annex H. ISO 2012 All rights

49、reserved 3BS EN ISO 6330:2012ISO 6330:2012(E)6 Reagents6.1 Reference detergents6.1.1 Reference detergent 1Reference detergent 1 is a non-phosphate powder detergent without enzymes and is available both with and without optical brightener. Other designations are 1993 AATCC standard reference detergent without optical brightener (WOB) and 1993 AATCC standard reference detergent with optical brightener.Reference detergent 1 can only be used in machine Type B.The nominal composition of reference detergent 1 is given