EN ISO 527-3-1995 en Plastics - Determination of Tensile Properties - Part 3 Test Conditions for Films and Sheets《塑料 拉伸性能的测定 第3部分 薄膜和薄板材用试验条件 结合技术勘误1998-06和2001-04》.pdf
《EN ISO 527-3-1995 en Plastics - Determination of Tensile Properties - Part 3 Test Conditions for Films and Sheets《塑料 拉伸性能的测定 第3部分 薄膜和薄板材用试验条件 结合技术勘误1998-06和2001-04》.pdf》由会员分享,可在线阅读,更多相关《EN ISO 527-3-1995 en Plastics - Determination of Tensile Properties - Part 3 Test Conditions for Films and Sheets《塑料 拉伸性能的测定 第3部分 薄膜和薄板材用试验条件 结合技术勘误1998-06和2001-04》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD BS EN ISO 527-3:1996 BS 2782-3: Method 326 E: 1996 Incorporating Technical Corrigendum No. 1 and Corrigendum No. 1 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets The European Standard EN ISO 527-3:1995 has the status of a British Standard P
2、roduct code 00637413 ICS 83.140.10 BS EN ISO 527-3:1996 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 January 1996 BSI 16 March 2004 The following B
3、SI references relate to the work on this British standard: Committee reference PRI/75 Draft for comment 94/304052 DC ISBN 0 580 24982 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PRI/75, Plastics and rubber films and
4、 sheets, upon which the following bodies were represented: British Plastics Federation Her Majestys Stationery Office Institute of Trading Standards Administration Ministry of Defence Packaging and Industrial Films Association PIRA International Amendments issued since publication Amd. No. Date Comm
5、ents 13253 Technical Corrigendum No. 1 August 2001 Correction to key in Figure 3 15005 Corrigendum No. 1 16 March 2004 Correction to implementation of amendment 13253 and correction to key in Figure 4BS EN ISO 527-3:1996 BSI 16 March 2004 i Contents Page Committees responsible Inside front cover Nat
6、ional foreword ii Foreword 2 1S c o p e 3 2 Normative references 3 3 Principle 3 4 Definitions 3 5 Apparatus 3 6 Test specimens 4 7 Number of specimens 7 8 Conditioning 7 9 Procedure 7 10 Calculation and expression of results 7 11 Precision 7 12 Test report 7 Figure 1 Specimen type 2 4 Figure 2 Spec
7、imen type 5 5 Figure 3 Specimen type 1B 5 Figure 4 Specimen type 4 6BS EN ISO 527-3:1996 ii BSI 16 March 2004 National foreword This British Standard has been prepared by Technical Committee PRI/75 and is the English language version of EN 527-3:1995 Plastics Determination of tensile properties Part
8、 3: Test conditions for films and sheets, published by the European Committee for Standardization (CEN). It was derived by CEN from ISO 527-3:1995, including Technical corrigendum June 1998 and April 2001 published by the International Organization for Standardization (ISO). It is incorporated into
9、BS 2782 Methods of testing plastics: Part 3: Mechanical properties, as Method 326E:1996. EN 527-3:1995 was produced as a result of international discussions in which the United Kingdom took an active part. This test method has been prepared for reference by other standards under preparation by CEN.
10、It has been implemented to enable experience of the method to be gained and for use for other fresh applications. It is also for use for the revision or amendment of other national standards as practicable, but it should not be presumed to apply to any existing standard or specification which contai
11、ns or makes reference to a different test method, until that standard/specification has been amended or revised, to make reference to this method and adjust any requirements as appropriate. This method supersedes BS 2782-3:Method 326A:1977, Method 326B:1977 and Method 326C:1977 which are withdrawn.
12、WARNING NOTE. This British Standard, which is identical with EN ISO 527-3:1995, does not necessarily detail all the precautions necessary to meet the requirements of the Health and Safety at Work etc. Act 1974. Attention should be paid to any appropriate safety precautions and the method should be o
13、perated only by trained personnel Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility
14、of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Su
15、mmary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO
16、527-3 August 1995 ICS 83.140.00 Incorporating technical corrigenda June 1998 and April 2001 Descriptors: Plastics, films, plastic sheets, tests, determination, tensile properties, testing conditions, test specimens English version Plastics Determination of tensile properties Part 3: Test conditions
17、for films and sheets (ISO 527-3:1995) Plastiques Dtermination des proprits en traction Partie 3: Conditions dessai pour films et feuilles (ISO 527-3:1995) Kunstoffe Bestimmung der Zugeigenschaften Teil 3: Prfbedingungen fr Folien und Tafeln (ISO 527-3:1995) This European Standard was approved by CEN
18、 on 1995-07-29. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
19、be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Centr
20、al Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European C
21、ommittee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. EN ISO 527-3:19
22、95 EEN ISO 527-3:1995 BSI 16 March 2004 2 Foreword The text of the International Standard ISO 527-3:1995 has been prepared by Technical Committee ISO/TC 61, Plastics, in collaboration with CEN/TC 249, Plastics. This European Standard shall be given the status of a national standard, either by public
23、ation of an identical text or by endorsement, at the latest by February 1996, and conflicting national standards shall be withdrawn at the latest by February 1996. In accordance with the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria,
24、 Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.EN ISO 527-3:1995 BSI 16 March 2004 3 1 Scope 1.1 This part of ISO 527 specifies the conditions for determining the tensile prope
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ENISO52731995ENPLASTICSDETERMINATIONOFTENSILEPROPERTIESPART3TESTCONDITIONSFORFILMSANDSHEETS 塑料 拉伸 性能
链接地址:http://www.mydoc123.com/p-722760.html