EN ISO 3581-2012 6875 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification《焊料 不锈钢和耐热钢手工金属电弧焊药皮焊条 分类》.pdf

《EN ISO 3581-2012 6875 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification《焊料 不锈钢和耐热钢手工金属电弧焊药皮焊条 分类》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 3581-2012 6875 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification《焊料 不锈钢和耐热钢手工金属电弧焊药皮焊条 分类》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 3581:2012W e l d i n g c o n s u m a b l e s Covered electrodes for manual metal arc welding of stainless and heat-resisting steels ClassificationCopyright European Com

2、mittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 3581:2012. It is identical to ISO 3581:200

3、3, incorporating Amendment 1:2011 and Corrigendum 1:2008. It supersedes BS EN 1600:1997, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee WEE/39, Welding consumables.A list of organizations represented on this committee can be obtained on request to its

4、 secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012 Published by BSI Standards Limited 2012ISBN 978 0 580 75370 1 ICS 25.160.20 Compliance with a British Standard

5、 cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license w

6、ith CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 3581 February 2012 ICS 25.160.20 Supersedes EN 1600:1997English Version Welding consumables - Covered electrodes for manual metal arc welding of stainles

7、s and heat-resisting steels - Classification (ISO 3581:2003+Cor 1:2008+Amd 1:2011) Produits consommables pour le soudage - lectrodes enrobes pour le soudage manuel larc des aciers inoxydables et rsistant aux tempratures leves - Classification (ISO 3581:2003+Cor 1:2008+Amd 1:2011) Schweizustze - Umhl

8、lte Stabelektroden zum Lichtbogenhandschweien von nichtrostenden und hitzebestndigen Sthlen - Einteilung (ISO 3581:2003+Cor 1:2008+Amd 1:2011) This European Standard was approved by CEN on 8 January 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c

9、onditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard ex

10、ists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national s

11、tandards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

12、Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.

13、EN ISO 3581:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012 EN ISO 3581:2012 (E) 3 Foreword The text of ISO 3581:2003+Cor 1:2008+Amd 1:2011 has been pr

14、epared by Technical Committee ISO/TC 44 “Welding and allied processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 3581:2012 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be given th

15、e status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the

16、 subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1600:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

17、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

18、and, Turkey and the United Kingdom. Endorsement notice The text of ISO 3581:2003+Cor 1:2008+Amd 1:2011 has been approved by CEN as a EN ISO 3581:2012 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or netw

19、orking permitted without license from IHS-,-,-BS EN ISO 3581:2012ISO 3581:2003(E) ISO 2003 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references . 1 3 Classification. 2 4 Symbols and requirements 5 4.1 Symbol for the product/process 5 4.2 Symbol for the che

20、mical composition of all-weld metal. 5 4.3 Symbol for type of electrode covering . 5 4.4 Symbol for effective electrode efficiency and type of current . 13 4.5 Symbol for welding position 13 5 Chemical analysis. 14 6 Mechanical property tests 14 6.1 General. 14 6.2 Preheat and interpass temperatures

21、. 14 6.3 Pass sequence 15 7 Fillet weld test . 15 8 Retests . 16 9 Technical delivery conditions 17 10 Examples of designation 17 Annex A (informative) Types of covering. 18 Annex B (informative) Considerations on weld metal ferrite contents . 19 Bibliography . 22 Copyright European Committee for St

22、andardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012ISO 3581:2003(E) iv ISO 2003 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of nat

23、ional standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Interna

24、tional organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the r

25、ules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by a

26、t least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3581 was prepared in collaboration with the Int

27、ernational Institute of Welding which has been approved by the ISO Council as an international standardizing body in the field of welding. This second edition cancels and replaces the first edition (ISO 3581:1976), which has been technically revised. Copyright European Committee for Standardization

28、Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012ISO 3581:2003(E) ISO 2003 All rights reserved vIntroduction This International Standard provides a classification system for stainless steel, covered welding el

29、ectrodes in terms of chemical composition of deposited weld metal and type of electrode covering. Other properties of the electrodes are specified by reference to tables. This International Standard has been prepared by the International Institute of Welding, Commission II “Arc Welding”, Subcommissi

30、on II-E. It recognizes that there are two somewhat different approaches in the global market, for classifying a given stainless steel, covered electrode, and allows for either or both to be used to suit a particular need. Application of either (or both) type(s) of classification designation identifi

31、es a product as classified according to this International Standard. It should be noted that the two systems are not exactly equivalent, therefore each system must be used independent of the other, without combining designators in any way. The classification according to ISO 3581, system A, is mainl

32、y based upon EN 1600; the classification according to ISO 3581, system B, is mainly based upon standards used around the Pacific Rim. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-

33、,-,-BS EN ISO 3581:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012INTERNATIONAL STANDARD ISO 3581:2003(E) ISO 2003 All rights reserved 1Welding consumable

34、s Covered electrodes for manual metal arc welding of stainless and heat-resisting steels Classification 1 Scope This International Standard specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other elec

35、trode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels. This International Standard is a combined standard providing for classification utilizing a system based upon classificati

36、on according to nominal composition, or utilizing a system based upon classification according to alloy type. a) Paragraphs and tables which carry the label “classification according to nominal composition” or “ISO 3581-A” are applicable only to products classified to that system. b) Paragraphs and

37、tables which carry the label “classification according to alloy type” or “ISO 3581-B” are applicable only to products classified to that system. c) Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems. 2 Normative references The fo

38、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 31-0:1992, Quantities and units Part 0: General pri

39、nciples ISO 544, Welding consumables Technical delivery conditions for welding filler metals Type of product, dimensions, tolerances and markings ISO 2401, Covered electrodes Determination of the efficiency, metal recovery and deposition coefficient ISO 6847, Welding consumables Deposition of a weld

40、 metal pad for chemical analysis ISO 6947, Welds Working positions Definitions of angles of slope and rotation ISO 8249, Welding Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals ISO 13916, Welding Guidance on the measurement of prehe

41、ating temperature, interpass temperature and preheat maintenance temperature ISO 14344, Welding and allied processes Flux and gas shielded electrical welding processes Procurement guidelines for consumables Copyright European Committee for Standardization Provided by IHS under license with CENNot fo

42、r ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012ISO 3581:2003(E) 2 ISO 2003 All rights reservedISO 15792-1:2000, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys ISO 15792-3, Wel

43、ding consumables Test methods Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld 3 Classification Classification designations are based upon two approaches for indicating the chemical composition of the all-weld metal deposit obtained w

44、ith a given electrode. The “nominal composition” approach uses designation components indicating directly the nominal levels of certain alloying elements, given in a particular order, and some symbols for low but significant levels of other elements, whose levels are not conveniently expressed as in

45、tegers. The “alloy type” approach uses tradition-based three- or four-digit designations for alloy families, and an occasionally additional character or characters for compositional modifications of each original alloy within the family. Both designation approaches include additional designators for

46、 some other classification requirements, but not entirely the same classification requirements, as will be clear from the following sections. Table 1 lists the tests required for classification of an electrode in each approach. In many cases, a given commercial product can be classified using both a

47、pproaches. Then either or both classification designations can be used for the product. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 3581:2012ISO 3581:2003(E) ISO 20

48、03 All rights reserved 3Table 1 Summary of test requirements Position of welding bElectrode designation Size a mm Chemical analysis test All-weld metal tension test Fillet weld test ISO 3581-A ISO 3581-B ISO 3581-A ISO 3581-B ISO 3581-A ISO 3581-B ISO 3581-A ISO 3581-B Coating type symbol B and position symbols 1 and 2 Position and coating type symbol - 15 3,2 or 3,0 4,0 5,0 or 4,8 6,0 (or 5,6 or 6,4) PA PA Not required Not required PA PA PA PA Not required PA Not required Not required Not required PA Not