EN ISO 3269-2000 en Fasteners - Acceptance Inspection《紧固件 验收检查ISO 3269-2000》.pdf
《EN ISO 3269-2000 en Fasteners - Acceptance Inspection《紧固件 验收检查ISO 3269-2000》.pdf》由会员分享,可在线阅读,更多相关《EN ISO 3269-2000 en Fasteners - Acceptance Inspection《紧固件 验收检查ISO 3269-2000》.pdf(30页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD Fasteners - Acceptance inspection The European Standard EN IS0 3269:2000 has the status of a British Standard ICs 21.060.01 BS EN IS0 3269:2001 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN IS0 3269:2001 This British Standard, having been prepared unde
2、r the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 2001 National foreword This British Standard is the official English language version of EN IS0 3269:2000. It is identical with IS0 3269:2000. CAUTION:
3、 This Standard permits the supply of Fasteners with major defects, including Mechanical Properties, outside the specified ranges. The UK participation in its preparation was entrusted to Technical Committee FME/9, Bolts, nuts and Accessories (+ present to the responsible internationallEuropean commi
4、ttee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-ref
5、erences The British Standards which implement international or European i;Ub!ictions referred to in this document mzy be four?d in the BSI Standards Catalogue under the section entitled ”international Standards Correspondence Index”, or by using the “Find facility of the BSI Standards Electronic Cat
6、alogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document co
7、mprises a front cover, an inside front cover, the EN IS0 title page, the EN IS0 foreword page, the IS0 title page, pages ii to v, a blank page, pages 1 to 17, the Annex ZA (2 pages) and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amend
8、ments issued since publication Amd. No. IDate I Comments O BSI 07-2001 ISBN O 580 38164 1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM O EN IS0 3269 June 2000 ICs 21.060.01 English version Fasteners - Acceptance inspection (IS0 3269:2000) Elments de fixation - Contrle de rception (IS0 3269:2000
9、) Mechanische Verbindungselemente - Annahmeprfung (IS0 3269:2000) This European Standard was approved by CEN on 25 May 2000. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit
10、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
11、made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Icela
12、nd, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. 0 EUROPEAN COMMiTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMITE EUROPEEN DE NORMALISATION Central Secretariat: rue de Stassart, 36 B-1050 Brussels O 2000 CEN All rights of expl
13、oitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN IS0 3269:2000 E EN IS0 3269:2000 Foreword The text of the International Standard IS0 3269:2000 has been prepared by Technical Committee ISOTTC 2 “Fasteners“ in collaboration with Technical Committee CENTTC
14、 185 “Threaded and non-threaded mechanical fasteners and accessories“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2000, and conflicting natio
15、nal standards shall be withdrawn at the latest by December 2000. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greec
16、e, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard IS0 3269:2000 was approved by CEN as a European Standard without any modification. NOTE: Normative references to Interna
17、tional Standards are listed in annex ZA (normative). EN IS0 3269:2000 I NTE R NATI O N AL IS0 STANDARD 3269 Third edition 2000-06-01 Fasteners - Acceptance inspection lment de fixation - Contrle de rception Reference number IS0 3269:2000(E) EN IS0 3269:2000 ii Contents EN IS0 3269:2000 Page Foreword
18、 .,.iv Introduction . v 1 Scope 1 2 Normative references . 3 Terms and definitions . 3 4 General principles and requirements . , . , 4 5 Acceptance inspection procedure for fastener characteristics , 5 Annex A (informative) Recommendations for acceptance-inspection procedures (for example, for dimen
19、sional characteristics) 1 1 Annex B (informative) Guidance and explanation concerning the principles of this International Standard ,.,.,.,14 Bibliography . . 17 O iii EN IS0 3269:2000 Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards b
20、odies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizati
21、ons, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the
22、 ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. O Attention is drawn to the possibility that
23、 some of the elements of this International Standard may be the subject of patent rights. IS0 shall not be held responsible for identifying any or all such patent rights. International Standard IS0 3269 was prepared by Technical Committee ISO/TC 2, Fasteners. nis third ediiion cacis and replaces the
24、 second ediiion (IS0 3269:1988), which has been technically revised. Annexes A and B of this International Standard are for information only. iv Introduction Although every fastener should meet all the requirements of the standard to which it is specified, in mass production this is not always possi
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ENISO32692000ENFASTENERSACCEPTANCEINSPECTION 紧固 验收 检查 ISO32692000PDF
链接地址:http://www.mydoc123.com/p-722317.html