EN ISO 3183-2012 en Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (Incorporates amendment A1 2018)《石油和天然气行业 钢管管道运输系统(取代 CEN 10208 -1 CEN 102.pdf

《EN ISO 3183-2012 en Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (Incorporates amendment A1 2018)《石油和天然气行业 钢管管道运输系统(取代 CEN 10208 -1 CEN 102.pdf》由会员分享，可在线阅读，更多相关《EN ISO 3183-2012 en Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (Incorporates amendment A1 2018)《石油和天然气行业 钢管管道运输系统(取代 CEN 10208 -1 CEN 102.pdf（194页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 3183:2012Petroleum and natural gas industries Steel pipe for pipeline transportation systems BS EN ISO 3183:2012 BRITISH STANDARDNational forewordThis British Standard

2、is the UK implementation of EN ISO 3183:2012. It supersedes BS EN 10208-1:2009 and BS EN 10208-2:2009, which are withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PSE/17/2, Transmission pipelines.A list of organizations represented on this committee can be obtaine

3、d on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 73062 7 ICS 75.200; 77.140.75 Compli

4、ance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

5、EN ISO 3183 November 2012 ICS 75.200; 77.140.75 Supersedes EN 10208-1:2009, EN 10208-2:2009English Version Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2012) Industries du ptrole et du gaz naturel - Tubes en acier pour les systmes de transport par c

6、onduites (ISO 3183:2012) Erdl- und Erdgasindustrie - Stahlrohre fr Rohrleitungstransportsysteme (ISO 3183:2012) This European Standard was approved by CEN on 22 September 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu

7、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versi

8、ons (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria,

9、Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw

10、itzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members

11、. Ref. No. EN ISO 3183:2012: EBS EN ISO 3183:2012EN ISO 3183:2012 (E) 3 Foreword This document (EN ISO 3183:2012) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“ in collaboration with Technical

12、Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standa

13、rds shall be withdrawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 102

14、08-1:2009, EN 10208-2:2009. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ

15、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 3183:2012 has been appro

16、ved by CEN as a EN ISO 3183:2012 without any modification. BS EN ISO 3183:2012ISO 3183:2012(E) ISO 2012 All rights reserved iiiContents PageForeword . vIntroduction . vi1 Scope 12 Conformance 12.1 Units of measurement 12.2 Rounding . 12.3 Compliance to this International Standard . 13 Normative refe

17、rences . 24 Terms and definitions . 55 Symbols and abbreviated terms . 115.1 Symbols . 115.2 Abbreviated terms .126 Pipe grade, steel grade and delivery condition .136.1 Pipe grade and steel grade .136.2 Delivery condition .147 Information to be supplied by the purchaser 157.1 General information 15

18、7.2 Additional information .168 Manufacturing 198.1 Process of manufacture 198.2 Processes requiring validation 218.3 Starting material 218.4 Tack welds .228.5 Weld seams in COW pipe 228.6 Weld seams in SAW pipe .228.7 Weld seams in double-seam pipe .238.8 Treatment of weld seams in EW and LW pipes

19、.238.9 Cold sizing and cold expansion 238.10 Coil/plate end welds .238.11 Jointers 248.12 Heat treatment 248.13 Traceability 249 Acceptance criteria .249.1 General .249.2 Chemical composition .249.3 Tensile properties 299.4 Hydrostatic test 339.5 Bend test 339.6 Flattening test .339.7 Guided-bend te

20、st .339.8 CVN impact test for PSL 2 pipe .349.9 DWT test for PSL 2 welded pipe 359.10 Surface conditions, imperfections and defects 359.11 Dimensions, mass and tolerances .379.12 Finish of pipe ends .429.13 Tolerances for the weld seam 449.14 Tolerances for mass .479.15 Weldability of PSL 2 pipe.471

21、0 Inspection 4810.1 Types of inspection and inspection documents .4810.2 Specific inspection .49BS EN ISO 3183:2012ISO 3183:2012(E)iv ISO 2012 All rights reserved11 Marking .7711.1 General .7711.2 Pipe markings .7711.3 Coupling markings 7911.4 Marking of pipe to multiple grades .8011.5 Thread identi

22、fication and certification .8011.6 Pipe processor markings 8012 Coatings and thread protectors 8112.1 Coatings and linings .8112.2 Thread protectors 8113 Retention of records .8114 Pipe loading 82Annex A (normative) Specification for welded jointers 83Annex B (normative) Manufacturing procedure qual

23、ification for PSL 2 pipe 84Annex C (normative) Treatment of surface imperfections and defects .88Annex D (normative) Repair welding procedure 90Annex E (normative) Non-destructive inspection for other than sour service or offshore service . 95Annex F (normative) Requirements for couplings (PSL 1 onl

24、y) 106Annex G (normative) PSL 2 pipe with resistance to ductile fracture propagation .109Annex H (normative) PSL 2 pipe ordered for sour service .115Annex I (normative) Pipe ordered as “Through the Flowline” (TFL) pipe .126Annex J (normative) PSL 2 pipe ordered for offshore service .128Annex K (norm

25、ative) Non-destructive inspection for pipe ordered for sour service and/or offshore service .144Annex L (informative) Steel designations 149Annex M (normative) PSL 2 pipe ordered for European onshore natural gas transmission pipelines 152Annex N (informative) .169Annex O (informative) .170Annex P (i

26、nformative) Equations for threaded and coupled pipe and background equations for guided bend and CVN test specimens .171Bibliography .181BS EN ISO 3183:2012ISO 3183:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO mem

27、ber bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmen

28、tal and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Direct

29、ives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies

30、 casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 3183 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offsh

31、ore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 2, Pipeline transportation systems.Working Group 16 of ISO/TC 67/SC 2 meets jointly with the Line Pipe Working Group (currently WG 4210) of the American Petroleum Institute (API) to ensure the harmonization of IS

32、O 3183 with API Specification 5L.This third edition of ISO 3183 cancels and replaces the second edition (ISO 3183:2007), on which it is based but with revisions to incorporate updating, clarification and additional technical requirements.The second edition of ISO 3183 was harmonized to a great exten

33、t with the 44th edition of API 5L, published on 1 October 2007, and the revisions produced by the joint ISO and API Working Groups are intended to extend or complete harmonization with the new 45th edition of API 5L.It is the intent of ISO/TC 67 that the second and third editions of ISO 3183 shall b

34、oth be applicable, at the option of the purchaser (as defined in 4.49), for a period of six months from the first day of the calendar quarter immediately following the date of publication of this third edition, after which period, the second edition (ISO 3183:2007) will no longer be applicable. ISO

35、2012 All rights reserved vBS EN ISO 3183:2012ISO 3183:2012(E)IntroductionThis International Standard is the result of harmonizing the requirements of the following standards: API Spec 5L; 44th edition published 1 October 2007; ISO 3183:2007; second edition published 15 March 2007.In the preparation

36、of this third edition of ISO 3183, the technical committee has maintained the concept of two basic levels of standard technical requirements for line pipe expressed as two product specification levels (PSL 1 and PSL 2). Level PSL 1 provides a standard quality level for line pipe. Level PSL 2 has add

37、itional mandatory requirements for chemical composition, notch toughness and strength properties and additional non-destructive testing (NDT). Requirements that apply only to PSL 1 or only to PSL 2 are so designated. Requirements that are not designated to a specific PSL designation apply to both PS

38、L 1 and PSL 2 pipe.The technical committee also recognized that the petroleum and natural gas industry often specifies additional requirements for particular applications. In order to accommodate such needs, optional additional requirements for special applications are available, as follows: PSL 2 p

39、ipe ordered with a qualified manufacturing procedure (Annex B), the requirements of which have been enhanced to include verification detail of critical processes in the production of feedstock material, line pipe manufacture and product testing and inspection; PSL 2 pipe ordered with resistance to d

40、uctile fracture propagation in gas pipelines (Annex G); PSL 2 pipe ordered for sour service (Annex H); pipe ordered as “Through the Flowline” (TFL) pipe (Annex I); PSL 2 pipe ordered for offshore service (Annex J);The following two new annexes are added to the third edition of this International Sta

41、ndard. PSL 2 pipe ordered for European onshore natural gas transmission pipelines (Annex M). Equations for threaded and coupled pipe and background equations for guided bend and CVN test (Annex P).The requirements of the annex(es) apply only when specified on the purchase order.When pipe is ordered

42、for dual or multiple applications, the requirements of more than one annex for special applications can be invoked. In such instances, if a technical conflict arises due to applying the requirements of more than one annex for special applications, the most stringent requirement applicable to the int

43、ended service applies.This International Standard does not provide guidance on when it is necessary to specify the above supplementary requirements. Instead, it is the responsibility of the purchaser to specify, based upon the intended use and design requirements, which, if any, of the supplementary

44、 requirements apply for a particular purchase order.This third edition of ISO 3183 is the result of a continuing process of harmonizing documents of different heritage. It has been necessary to give consideration to traditional symbols (denoting mechanical or physical properties or their values, dim

45、ensions or test parameters) and the format of equations that have been widely used and which (in their traditional format) maintain strong links with other widely used standards and specifications, and with the original scientific work that led to their derivation. Accordingly, although in some inst

46、ances changes to established symbols and equations have been made to optimize alignment with the ISO/IEC Directives, Part 2, in other instances, some symbols and equations, most specifically those in 9.2, Table F.1 and Annex P, have been retained in their traditional form to avoid causing confusion

47、in this post-harmonization stage. Where changes have been made, care has been taken to ensure that the new symbol replacing the traditional one has been fully and clearly defined.vi ISO 2012 All rights reservedBS EN ISO 3183:2012INTERNATIONAL STANDARD ISO 3183:2012(E)Petroleum and natural gas indust

48、ries Steel pipe for pipeline transportation systems1 ScopeThis International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas indust

49、ries.This International Standard is not applicable to cast pipe.2 Conformance2.1 Units of measurementIn this International Standard, data are expressed in both International System (SI) units and United States Customary (USC) units. For a specific order item, only one system of units shall be used, without combining data expressed in the other system. Data values expressed in SI and USC units shall not be combined on the same inspection document or in the same required pipe marking sequence.Where product is tested and verified against requirements usi