EN ISO 2589-2016 en Leather - Physical and mechanical tests - Determination of thickness《皮革物理和机械试验厚度的测定(ISO 2589 2016)》.pdf

《EN ISO 2589-2016 en Leather - Physical and mechanical tests - Determination of thickness《皮革物理和机械试验厚度的测定(ISO 2589 2016)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 2589-2016 en Leather - Physical and mechanical tests - Determination of thickness《皮革物理和机械试验厚度的测定(ISO 2589 2016)》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 2589:2016Leather Physical andmechanical tests Determination of thickness(ISO 2589:2016)BS EN ISO 2589:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 2589:2016.It supersedes BS EN ISO 2589:2002 which is withdrawn.The U

2、K participation in its preparation was entrusted to TechnicalCommittee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract.

3、 Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 90471 4ICS 59.140.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

4、of theStandards Policy and Strategy Committee on 31 March 2016.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 2589 March 2016 ICS 59.140.30 Supersedes EN ISO 2589:2002English Version Leather - Physical and mechanical tests - Determinatio

5、n of thickness (ISO 2589:2016) Cuir - Essais physiques et mcaniques - Dtermination de lpaisseur (ISO 2589:2016) Leder - Physikalische und mechanische Prfungen - Bestimmung der Dicke (ISO 2589:2016) This European Standard was approved by CEN on 23 January 2016. CEN members are bound to comply with th

6、e CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managemen

7、t Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status

8、as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

9、etherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All

10、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2589:2016 EBS EN ISO 2589:2016EN ISO 2589:2016 (E) 3 European Foreword This document (EN ISO 2589:2016) has been prepared by Technical Committee IULTCS “ International Union of Leather Te

11、chnologists and Chemists Societies“ in collaboration with Technical Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Septembe

12、r 2016, and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent

13、 rights. This document supersedes EN ISO 2589:2002. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

14、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO

15、2589:2016 has been approved by CEN as EN ISO 2589:2016 without any modification. BS EN ISO 2589:2016ISO 2589:2016(E)IULTCS/IUP 4:2016(E)Foreword iv1 Scope . 12 Normative references 13 Principle 14 Apparatus . 15 Sampling and sample preparation 26 Procedure. 27 Expression of results 28 Test report .

16、2 ISO 2016 All rights reserved iiiContents PageBS EN ISO 2589:2016ISO 2589:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through

17、 ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborate

18、s closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval crit

19、eria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of

20、 patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name

21、used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical

22、Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationISO 2589 was prepared by the Physical Test Commission of the International Union of Leather Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European Committee for Standardizatio

23、n (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of which is held by UNI, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).It is based on IUP 4 originally published in J. Soc. Leather Trades Chemists 42, p. 387, (1958) and declared an o

24、fficial method of the IULTCS in 1959. An updated version was published in J. Soc. Leather Tech. Chem. 82, p. 225, (1998) and a further revision published in J. Soc. Leather Tech. Chem. 84, p. 311, (2000) and reconfirmed as an official method in March 2001. This latest revision now includes the numbe

25、r of test measurements to be taken.IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the advancement of leather science and technology. IULTCS has three Commissions, which are responsible for establishing international methods for the sampli

26、ng and testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather.This third edition cancels and replaces the second edition (ISO 2589:2002), of which it constitutes a minor revision to align item c) of Clause 8 with ISO 2419:2012

27、.IULTCS/IUP 4:2016(E)iv ISO 2016 All rights reservedBS EN ISO 2589:2016INTERNATIONAL STANDARDISO 2589:2016(E)IULTCS/IUP 4:2016(E)Leather Physical and mechanical tests Determination of thickness1 ScopeThis International Standard specifies a method for determining the thickness of leather. The method

28、is applicable to all types of leather of any tannage. The measurement is valid for both the whole leather and a test sample.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,

29、 only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 2418, Leather Chemical, physical and mechanical and fastness tests Sampling locationISO 2419, Leather Physical and mechanical tests Sample preparation and con

30、ditioning3 PrincipleThe leather is placed in a gauge under a specified load for a specified time and the thickness read directly.4 Apparatus4.1 Test machine, including the following:4.1.1 Gauge, graduated to read to 0,01 mm directly with an accuracy of 0,02 mm over the whole scale length.4.1.2 Anvil

31、, comprising the flat horizontal surface of a cylinder of diameter 10,00 mm 0,05 mm projecting 3,0 mm 0,1 mm above the surface of a concentric flat circular platform of diameter 50,0 mm 0,2 mm.NOTE The circular platform of 50 mm diameter helps to support medium weight leathers which otherwise presen

32、ts a convex surface to the presser foot. The anvil is raised 3 mm above the platform so that errors are avoided in measurements on heavy leathers which are not flat.4.1.3 Presser foot, having a flat circular surface of diameter 10,0 mm 0,05 mm, coaxial with the anvil and capable of movement normal t

33、o the face of the anvil. The contacting surfaces of the anvil and presser foot shall be dead weight loaded with 393 g 10 g. Movements of the presser foot shall give a direct reading of the movement on the gauge (4.1.1).NOTE The loads and dimensions quoted in 4.1.3 give a pressure of 49,1 kPa (500 g/

34、cm2).4.1.4 Rigid stand, to hold the gauge (4.1.1), anvil (4.1.2) and presser foot (4.1.3). ISO 2016 All rights reserved 1BS EN ISO 2589:2016ISO 2589:2016(E)5 Sampling and sample preparation5.1 Official sample in accordance with ISO 2418. Five measurements to be taken, distributed across the sample.5

35、.2 Sample prepared for other tests. Three measurements to be taken, distributed across the sample.5.3 Sample of unknown origin. Five measurements to be taken, distributed across the sample.5.4 For very heavy, firm leathers, a smaller sample is recommended to avoid curvature. Three measurements to be

36、 taken, distributed across the sample.5.5 For whole hides, five measurements for each location should be taken. Condition all samples in accordance with ISO 2419.6 ProcedurePlace the apparatus on a flat, horizontal surface. Place the sample in the gauge grain side up if this can be identified. If th

37、e grain cannot be identified place the sample in the gauge with either surface upwards. Apply the load gently and record the thickness 5 s 1 s after full loading is reached.7 Expression of resultsThe results shall be expressed as the arithmetic mean and range to the nearest 0,01 mm.8 Test reportThe

38、test report shall include the following:a) a reference to this International Standard, i.e. ISO 2589;b) the results obtained expressed to the nearest 0,01 mm;c) the standard atmosphere used for conditioning and testing as given in ISO 2419;d) any deviations from the method specified in this Internat

39、ional Standard;e) full details for identification of the sample.IULTCS/IUP 4:2016(E)2 ISO 2016 All rights reservedBS EN ISO 2589:2016This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publ

40、ications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, ind

41、ustry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all siz

42、es and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge C

43、entre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organ

44、izations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,0

45、00 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subs

46、cription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of

47、 membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further informati

48、on, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the

49、 Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, D