EN ISO 1833-20-2010 en Textiles - Quantitative chemical analysis - Part 20 Mixtures of elastane and certain other fibres (method using dimethylacetamide)《纺织品 定量化学分析 第20部分 弹性纤维的混合物与.pdf

《EN ISO 1833-20-2010 en Textiles - Quantitative chemical analysis - Part 20 Mixtures of elastane and certain other fibres (method using dimethylacetamide)《纺织品 定量化学分析 第20部分 弹性纤维的混合物与.pdf》由会员分享，可在线阅读，更多相关《EN ISO 1833-20-2010 en Textiles - Quantitative chemical analysis - Part 20 Mixtures of elastane and certain other fibres (method using dimethylacetamide)《纺织品 定量化学分析 第20部分 弹性纤维的混合物与.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-20:2010Textiles Quantitativechemical analysisPart 20: Mixtures of elastane andcertain other fibres (method usingdimethylacetamide) (ISO 1833-20:2009)BS EN ISO 1833

2、-20:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-20:2010. It is identical to ISO 1833-20:2009. It supersedes BS4407:1988 which will be withdrawn on publication of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation

3、 was entrusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctappl

4、ication. BSI 2011ISBN 978 0 580 72141 0ICS 59.060.01; 59.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publication

5、Date Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-20 October 2010 ICS 59.060.01 English Version Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) (ISO 1833-20:2009) Textiles - Analyse chim

6、ique quantitative - Partie 20: Mlanges dlasthanne et de certaines autres fibres (mthode la dimthylactamide) (ISO 1833-20:2009) Textilien - Quantitative chemische Analysen - Teil 20: Mischungen aus Elasthanfasern und bestimmten anderen Fasern (Dimethylacetamid-Verfahren) (ISO 1833-20:2009)This Europe

7、an Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references c

8、oncerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into it

9、s own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L

10、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Bru

11、ssels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-20:2010: EBS EN ISO 1833-20:2010EN ISO 1833-20:2010 (E) 3 Foreword The text of ISO 1833-20:2009 has been prepared by Technical Committee ISO/TC 38 “Textiles” of th

12、e International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-20:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publicat

13、ion of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall n

14、ot be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark

15、, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-20:2009 has been approve

16、d by CEN as a EN ISO 1833-20:2010 without any modification. BS EN ISO 1833-20:2010ISO 1833-20:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing In

17、ternational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison

18、with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of techn

19、ical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn

20、 to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-20 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition, together with ISO 1833-1 to IS

21、O 1833-19 and ISO 1833-21 to ISO 1833-24, cancels and replaces ISO 1833:1977, which has been technically revised. ISO 1833 consists of the following parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mi

22、xtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 6: Mixtures of viscose or certain types of cupro

23、 or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and triacetate fibres (method usi

24、ng benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and ce

25、rtain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) BS EN ISO 1833-20:2010ISO 1833-20:2009(E) iv ISO 2009 All rights reserved Part 14: Mixtures of acetate and certain chlorofibres (method using

26、 acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method usin

27、g sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 21: Mixtures of chlorofibres, certain modacryli

28、cs, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) The following parts are under preparation: Part 22: Mixtures of viscose or certain types of cupro or

29、modal or lyocell and flax fibres (method using formic acid and zinc chloride) Part 25: Mixtures of polyester and some other fibres (method using trichloracetic acid and chloroform) Part 23 of ISO 1833, Mixtures of polyethylene and polypropylene (method using cyclohexanone) was withdrawn by Technical

30、 Committee ISO/TC 38. BS EN ISO 1833-20:2010INTERNATIONAL STANDARD ISO 1833-20:2009(E) ISO 2009 All rights reserved 1Textiles Quantitative chemical analysis Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) WARNING This part of ISO 1833 calls for the use of subs

31、tances/procedures that may be injurious to the health/environment if appropriate conditions are not observed. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety/environment at any stage. 1 Scope This part of ISO 1833 specifies a

32、 method using dimethylacetamide to determine the percentage of elastane, after removal of non-fibrous matter, in textiles made of binary mixtures of certain elastane fibres with cotton, viscose, cupro, modal, polyamide, polyester or wool fibres. This method is not applicable when acrylic fibres are

33、present. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1:2006,

34、Textiles Quantitative chemical analysis Part 1: General principles of testing 3 Principle The elastane fibre is dissolved out from a known dry mass of the mixture with dimethylacetamide (DMA). The residue is collected, washed, dried and weighed; its mass, corrected if necessary, is expressed as a pe

35、rcentage of the dry mass of the mixture. The percentage of elastane is found by difference. 4 Reagents Use the reagents described in ISO 1833-1, together with that specified in 4.1. 4.1 Dimethylacetamide (DMA) SAFETY PRECAUTIONS The harmful effects of this reagent shall be borne in mind, and full pr

36、ecautions shall be taken during use. BS EN ISO 1833-20:2010ISO 1833-20:2009(E) 2 ISO 2009 All rights reserved5 Apparatus Use the items of apparatus described in ISO 1833-1, together with those described in 5.1 and 5.2. 5.1 Conical flask, of minimum capacity 250 ml, glass stoppered. 5.2 Heating appar

37、atus, suitable for maintaining the temperature of the flask within the limits 60 C to 65 C. 6 Test procedure Follow the general procedure described in ISO 1833-1, and then proceed as follows. Place the specimen in the conical flask. Add 150 ml of DMA per gram of specimen. Shake to wet the specimen.

38、Leave it for at least for 30 min in the double boiler at 60 C, shaking at intervals. Filter the contents of the conical flask through the weighted filter crucible (6.1 in ISO 1833-1:2006) and transfer any residual fibres to the crucible by washing out the conical flask with DMA. Drain the crucible u

39、sing suction and wash with water. Do not apply suction until the washing liquor has drained under gravity. Finally, drain the crucible with suction, dry the crucible and residue, cool and weigh them. 7 Calculation and expression of results Calculate the results as described in the instructions in Cl

40、ause 10 of ISO 1833-1:2006. The value of d (correction factor of variation in mass of the insoluble component in the reagent) is 1,00, except for wool, for which d is 1,01; and for cotton, for which d is 1,02. 8 Precision On a homogeneous mixture of textile materials, the confidence limits of the re

41、sults obtained by this method are not greater than 1 % for a confidence level of 95 %. BS EN ISO 1833-20:2010ISO 1833-20:2009(E) ISO 2009 All rights reserved 3Bibliography 1 ISO 2076, Textiles Man-made fibres Generic names 2 ISO 6938, Textiles Natural fibres Generic names and definitions This page d

42、eliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated

43、 by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the l

44、atest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of whic

45、h can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying s

46、tandardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In

47、response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through

48、 its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with st

49、andardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Onli