EN ISO 1833-2-2010 en Textiles - Quantitative chemical analysis - Part 2 Ternary fibre mixtures《纺织品 定量化学分析 第2部分 三组分纤维混纺》.pdf

《EN ISO 1833-2-2010 en Textiles - Quantitative chemical analysis - Part 2 Ternary fibre mixtures《纺织品 定量化学分析 第2部分 三组分纤维混纺》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 1833-2-2010 en Textiles - Quantitative chemical analysis - Part 2 Ternary fibre mixtures《纺织品 定量化学分析 第2部分 三组分纤维混纺》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-2:2010Textiles Quantitativechemical analysisPart 2: Ternary fibre mixtures (ISO1833-2:2006)BS EN ISO 1833-2:2010 BRITISH STANDARDNational forewordThis British Stan

2、dard is the UK implementation of EN ISO1833-2:2010. It is identical to ISO 1833-2:2006. It supersedes BS4407:1988 which will be withdrawn on publication of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/80, Chemical testing

3、 of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72123 6ICS 59.060.01Complianc

4、e with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN I

5、SO 1833-2 October 2010 ICS 59.060.01 English Version Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixtures (ISO 1833-2:2006) Textiles - Analyse chimique quantitative - Partie 2: Mlanges ternaires de fibres (ISO 1833-2:2006) Textilien - Quantitative chemische Analysen - Teil 2: T

6、ernre Fasermischungen (ISO 1833-2:2006) This European Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration

7、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translati

8、on under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, G

9、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORM

10、UNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-2:2010: EBS EN ISO 1833-2:2010EN ISO 1833-2:2010 (E) 3 Foreword The text of ISO 1833-2:2006 has been prepared by

11、 Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-2:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the sta

12、tus of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subjec

13、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulg

14、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice

15、 The text of ISO 1833-2:2006 has been approved by CEN as a EN ISO 1833-2:2010 without any modification. ISO 1833-2:2006(E) ISO 2006 All rights reserved iiiContents Page Foreword iv Introduction . vi 1 Scope 1 2 Normative references 1 3 Principle1 4 Reagents and apparatus .1 5 Conditioning and testin

16、g atmosphere.1 6 Sampling and pre-treatment of sample .1 7 Procedure .2 8 Calculation and expression of results.2 9 Method of analysis by a combination of manual separation and chemical means7 10 Precision of methods 7 11 Test report 7 Annex A (informative) Examples of the calculation of percentages

17、 of the components of certain ternary mixtures using some of the variants described in 8.2 .8 Annex B (informative) Table of typical ternary mixtures which may be analysed using methods of analysis of binary mixtures specified in the parts of ISO 1833 11 Bibliography 14 ISO 1833-2:2006(E) iv ISO 200

18、6 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a

19、subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission

20、 (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical com

21、mittees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not

22、 be held responsible for identifying any or all such patent rights. ISO 1833-2 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition cancels and replaces ISO 5088:1976, which has been withdrawn. ISO 1833 consists of the following parts, under the general title Textiles Quantita

23、tive chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or moda

24、l and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtur

25、es of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using d

26、imethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide /acetone) Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)

27、ISO 1833-2:2006(E) ISO 2006 All rights reserved v Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Part 18: Mixtures of silk and wool or ha

28、ir (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The following parts are under preparation: Par

29、t 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and

30、 flax fibres (method using formic acid and zinc chlorate) Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane) ISO 1833-2:2006(E) vi ISO 2006 All rights reservedIntroduction T

31、he methods of quantitative analysis of mixtures of textile fibres are based on two processes: the manual separation and the chemical separation of fibre types. The method of manual separation should be used whenever possible, since it generally gives more accurate results than the chemical method. I

32、t can be used for all textiles whose component fibres do not form an intimate mixture, as, for example, in the case of yarns composed of several elements each of which is made up of one type of fibre, or fabrics in which the warp is of a different type of fibre from the weft, or knitted fabrics capa

33、ble of being unravelled and made up of yarns of different types. In general, the methods for quantitative chemical analysis of ternary fibre mixtures are based on the selective solution of the individual components of the mixture. Four variants of this procedure are possible. Variant 1: Using two di

34、fferent test specimens, component (a) is dissolved from the first test specimen and component (b) from the second test specimen. The insoluble residues of each test specimen are weighed and the percentage of each soluble component is calculated from the respective losses in mass. The percentage of t

35、he third component (c) is calculated by difference. Variant 2: Using two different test specimens, a component (a) is dissolved from the first test specimen, and two components (a and b) from the second test specimen. The insoluble residue of the first test specimen is weighed and the percentage of

36、the component (a) is calculated from the loss in mass. The insoluble residue of the second test specimen is weighed: it corresponds to component (c). The percentage of the third component (b) is calculated by difference. Variant 3: Using two different test specimens, two components (a and b) are dis

37、solved from the first test specimen and two components (b and c) from the second test specimen. The insoluble residues correspond to the two components (c) and (a) respectively. The percentage of the third component (b) is calculated by difference. Variant 4: Using only one test specimen, one of the

38、 components is removed, after which the insoluble residue formed by the two other fibres is weighed and the percentage of the soluble component is calculated from the loss in mass. One of the two fibres of the residue is dissolved, the insoluble component is weighed and the percentage of the second

39、soluble component is calculated from the loss in mass. Where a choice is possible, it is advisable to use one of the first three variants. Where chemical analysis is used, take care to choose methods prescribing solvents which dissolve only the required fibre or fibres, and leave undissolved the oth

40、er fibre or fibres. By way of example, Annex B contains a certain number of ternary mixtures, together with methods for analysing binary mixtures which can, in principle, be used for analysing these ternary mixtures. In order to reduce the possibility of error to a minimum, it is recommended that, w

41、henever possible, chemical analysis using at least two of the four above-mentioned variants should be made. Mixtures of fibres used during processing and, to a lesser extent, in finished textiles may contain non-fibrous matter such as fats, waxes or dressings, or water-soluble matter either occurrin

42、g naturally or added to facilitate processing. Non-fibrous matter should be removed before analysis. A method of pre-treatment for removing oils, fats, waxes and water-soluble matter is given in ISO 1833-1:2006, Annex A. In addition, textiles may contain resins or other matter added to confer specia

43、l properties. Such matter, including dyestuffs in exceptional cases, may interfere with the action of the reagent on the soluble components and/or it may be partially or completely removed by the reagents. ISO 1833-2:2006(E) ISO 2006 All rights reserved viiThis type of added matter may thus cause er

44、rors and should be removed before the sample is analysed. If it is impossible to remove such added matter, the methods for quantitative chemical analysis given in Annex B are no longer applicable. Dye in dyed fibre is considered to be an integral part of the fibre and is not removed. Analyses are co

45、nducted on the basis of dry mass and a procedure is given for its determination. The result is expressed by reference to the dry mass or by reference to this mass after application of the conventional recovery rate. Before proceeding with any analysis, all the fibres present in the mixture should be

46、 identified. In some chemical methods, the insoluble components of a mixture may be partially dissolved in the reagent used to dissolve the soluble component or components. Whenever possible, reagents have been chosen that have little or no effect on the insoluble fibres. If a loss in mass is known

47、to occur during the analysis, the result should be corrected; correction factors are given for this purpose. These factors have been determined in several laboratories by treating, with the appropriate reagent as specified in the method of analysis, fibres cleaned by the pre-treatment. These correct

48、ion factors apply only to undegraded fibres and different correction factors may be necessary if the fibres have been degraded before or during processing. If the fourth variant, in which a textile fibre is subjected to the successive action of two different solvents, should be used, correction fact

49、ors should be applied for possible losses in mass undergone by the fibre in the two treatments. At least two determinations should be made, both in the case of manual separation and in the case of chemical separation. INTERNATIONAL STANDARD ISO 1833-2:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 2: Ternary fibre mixtures 1 Scope This part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary mixtures of fibres. The field of appli