EN IEC 62439-5-2018 en Industrial communication networks - High availability automation networks - Part 5 Beacon Redundancy Protocol (BRP).pdf

《EN IEC 62439-5-2018 en Industrial communication networks - High availability automation networks - Part 5 Beacon Redundancy Protocol (BRP).pdf》由会员分享，可在线阅读，更多相关《EN IEC 62439-5-2018 en Industrial communication networks - High availability automation networks - Part 5 Beacon Redundancy Protocol (BRP).pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Industrial communication networks - High availability automation networksPart 5: Beacon Redundancy Protocol (BRP)BS EN IEC 624395:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN IEC 62439-5Feburary 2018ICS 25.040;

2、 35.040 Supersedes EN 62439-5:2010 English VersionIndustrial communication networks - High availability automationnetworks - Part 5: Beacon Redundancy Protocol (BRP)(IEC 62439-5:2016)Rseaux de communication industrielle - Rseauxdautomatisme haute disponibilit - Partie 5: Protocole de redondance bali

3、se (BRP)(IEC 62439-5:2016)Industrielle Kommunikationsnetze - Hochverfgbare Automatisierungsnetze - Teil 5: Funkbaken-Redundanz-Protokoll (BRP)(IEC 62439-5:2016)This European Standard was approved by CENELEC on 2016-05-04. CENELEC members are bound to comply with the CEN/CENELECInternal Regulations w

4、hich stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.Thi

5、s European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENEL

6、EC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands

7、, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centr

8、e: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 62439-5:2017 ENational forewordThis British Standard is the UK implementation of EN IEC 624395:2018. It is identical to IEC 624395:2016. It

9、 supersedes BS EN 624395:2010, which will be withdrawn on 2 February 2021.The UK participation in its preparation was entrusted to Technical Committee GEL/65/3, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be

10、 obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93198 7ICS 35.110; 35.100.05;

11、 35.040; 35.040.01; 25.040; 25.040.40Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affec

12、tedBRITISH STANDARDBS EN IEC 624395:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62439-5 Feburary 2018 ICS 25.040; 35.040 Supersedes EN 62439-5:2010 English Version Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) (I

13、EC 62439-5:2016) Rseaux de communication industrielle - Rseaux dautomatisme haute disponibilit - Partie 5: Protocole de redondance balise (BRP) (IEC 62439-5:2016) Industrielle Kommunikationsnetze - Hochverfgbare Automatisierungsnetze - Teil 5: Funkbaken-Redundanz-Protokoll (BRP) (IEC 62439-5:2016) T

14、his European Standard was approved by CENELEC on 2016-05-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r

15、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

16、of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former

17、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrot

18、echnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

19、Ref. No. EN 62439-5:2017 E BS EN IEC 624395:2018EN IEC 62439-5:2018 (E) 2 European foreword The text of document 65C/834/FDIS, future edition 2 of IEC 62439-5:2016, prepared by subcommittee 65C: Industrial networks, of IEC technical committee 65: Industrial-process measurement, control and automatio

20、n was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62439-5:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-08-02 latest date by

21、 which the national standards conflicting with the document have to be withdrawn (dow) 2021-02-02 This document supersedes EN 62439-5:2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for

22、identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62439-5:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:

23、IEC 61158 (all parts) NOTE Harmonized as EN 61158 (all parts). IEC 62439-2 NOTE Harmonized as EN 62439-4 (not modified). IEC 62439-3 NOTE Harmonized as EN 62439-6 (not modified). IEC 62439-4 NOTE Harmonized as EN 62439-4 (not modified). IEC 62439-6 NOTE Harmonized as EN 62439-4 (not modified). BS EN

24、 IEC 624395:2018EN IEC 62439-5:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this docume

25、nt. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOT

26、E 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-191 - International Electrotechnical Vocabulary - Chapter 191: Dependability and quality of service - - IEC 62439-1 - Indust

27、rial communication networks - High availability automation networks - Part 1: General concepts and calculation methods EN 62439-1 - ISO/IEC 10164-1 - Information technology; Open Systems Interconnection; systems management: object management function - - ISO/IEC/TR 8802-1 - Information technology -

28、Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 1: Overview of Local Area Network Standards - - ISO/IEC/IEEE 8802-3 2014 Standard for Ethernet - - IEEE 802.1D - IEEE Standard for local and metropolitan area networks -

29、Media Access Control (MAC) Bridges - - IEEE 802.1Q - IEEE Standard for Local and metropolitan area networks - Media Access Control (MAC) Bridges and Virtual Bridges - - BS EN IEC 624395:2018 2 IEC 62439-5:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Term

30、s, definitions, abbreviations, acronyms, and conventions 7 3.1 Terms and definitions 7 3.2 Abbreviations and acronyms 8 3.3 Conventions 8 4 BRP overview 8 5 BRP principle of operation . 8 5.1 General . 8 5.2 Network topology 8 5.3 Network components . 11 5.4 Rapid reconfiguration of network traffic

31、12 6 BRP stack and fault detection features . 12 7 BRP protocol specification . 14 7.1 MAC addresses . 14 7.2 EtherType . 14 7.3 Fault detection mechanisms 14 7.4 BRP end device 14 7.4.1 State diagram 14 7.4.2 Start-up . 15 7.4.3 Normal operation . 15 7.4.4 Fault detection . 16 7.4.5 State-Event-Act

32、ion table . 16 7.5 Beacon device 26 7.5.1 State diagram 26 7.5.2 Start-up . 27 7.5.3 Normal operation . 27 7.5.4 Fault detection . 28 7.5.5 Changing BRP parameters . 28 7.5.6 State-Event-Action table . 29 8 BRP message structure . 36 8.1 General . 36 8.2 ISO/IEC/IEEE 8802-3 (IEEE 802.3) Tagged commo

33、n message header . 36 8.3 Beacon message . 37 8.4 Path_Check_Request message . 37 8.5 Path_Check_Response message . 38 8.6 Learning_Update message 38 9 BRP fault recovery time . 38 10 BRP service definition 39 10.1 Supported services . 39 10.2 Common service parameters . 39 10.3 Set_Node_Parameters

34、service 40 10.4 Get_Node_Parameters service 41 BS EN IEC 624395:2018IEC 62439-5:2016 IEC 2016 3 10.5 Get_Node_Status service 43 11 BRP Management Information Base (MIB) 44 Bibliography . 47 Figure 1 BRP star network example 9 Figure 2 BRP linear network example . 10 Figure 3 BRP ring network example

35、 11 Figure 4 BRP stack architecture . 12 Figure 5 State diagram for end device 15 Figure 6 State diagram for beacon device . 27 Table 1 Parameter values for end device 17 Table 2 State-Event-Action table for end device 18 Table 3 Parameter values for beacon device 29 Table 4 State-Event-Action table

36、 for beacon device 30 Table 5 Destination MAC addresses . 36 Table 6 Common message header . 37 Table 7 Beacon message format 37 Table 8 Path_Check_Request message format . 37 Table 9 Path_Check_Response message format 38 Table 10 Learning_Update message format 38 Table 11 BRP Set_Node_Parameters se

37、rvice parameters . 40 Table 12 BRP Get_Node_Parameters service parameters . 42 Table 13 BRP Get_Node_Status service parameters 43 BS EN IEC 624395:2018 4 IEC 62439-5:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL COMMUNICATION NETWORKS HIGH AVAILABILITY AUTOMATION NETWORKS Part

38、 5: Beacon Redundancy Protocol (BRP) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questi

39、ons concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s

40、)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collab

41、orates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on

42、 the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure

43、that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to th

44、e maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification b

45、odies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach

46、to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) a

47、nd expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication.

48、International Standard IEC 62439-5 has been prepared by subcommittee 65C: Industrial networks, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical rev

49、ision. This edition includes the following significant technical changes with respect to the previous edition: a) The protocol is now independent of application (Path_Check_Request is sent periodically); b) Failure_Notify message has been removed; c) Frame format had been changed; d) New MAC address had been added. BS EN IEC 624395:2018IEC 62439-5:2016 IEC 2016 5 The text of this standard is based on the following documents: FDIS Report on vot