EN IEC 62386-332-2018 en Digital addressable lighting interface - Part 332 Particular requirements - Input devices - Feedback.pdf

《EN IEC 62386-332-2018 en Digital addressable lighting interface - Part 332 Particular requirements - Input devices - Feedback.pdf》由会员分享，可在线阅读，更多相关《EN IEC 62386-332-2018 en Digital addressable lighting interface - Part 332 Particular requirements - Input devices - Feedback.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Digital addressable lighting interfacePart 332: Particular requirements Input devices Feedback (IEC 62386-332:2017)BS EN IEC 62386-332:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62386-332 February 2018

2、 ICS 29.140.99 English Version Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback (IEC 62386-332:2017) Interface dclairage adressable numrique - Partie 332: Exigences particulires - Dispositifs dentre - Rtroaction (IEC 62386-332:2017) Digital addres

3、sierbare Schnittstelle fr die Beleuchtung - Teil 332: Besondere Anforderungen fr Eingabegerte - Rckmeldung von Statusinformationen (IEC 62386-332:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which st

4、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Eur

5、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC m

6、embers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,

7、Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Ce

8、ntre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62386-332:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62386-332:2018. It is identical to IEC 6

9、2386-332:2017.The UK participation in its preparation was entrusted to Technical Committee CPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

10、contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 86006 5ICS 29.140.99Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under th

11、e authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 62386-332:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62386-332 February 2018 ICS 29.140.99 English Version Digita

12、l addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback (IEC 62386-332:2017) Interface dclairage adressable numrique - Partie 332: Exigences particulires - Dispositifs dentre - Rtroaction (IEC 62386-332:2017) Digital addressierbare Schnittstelle fr die Beleuch

13、tung - Teil 332: Besondere Anforderungen fr Eingabegerte - Rckmeldung von Statusinformationen (IEC 62386-332:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi

14、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three offici

15、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechni

16、cal committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Se

17、rbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Br

18、ussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62386-332:2018 E BS EN IEC 62386-332:2018EN IEC 62386-332:2018 (E) 2 European foreword The text of document 34/430/FDIS, future edition 1 of IEC 62386-332, prepared by

19、IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62386-332:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by end

20、orsement (dop) 2018-10-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-17 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for id

21、entifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62386-332:2017 was approved by CENELEC as a European Standard without any modification. BS EN IEC 62386-332:2018EN IEC 62386-332:2018 (E) 3 Annex ZA (normative) Normative references to internationa

22、l publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest editio

23、n of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is

24、 available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61347-1 - Lamp controlgear - Part 1: General and safety requirement EN 61347-1 - IEC 62386-103 2014 Digital addressable lighting interface - Part 103: General requirements - Control devices EN 62386-103 2014 +A1 - EN 62386-103:20

25、14/prA1 - IEC 62386-333 201X Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual Configuration (feature type 33) prEN 62386-333 2016 BS EN IEC 62386-332:2018This page deliberately left blank 2 IEC 62386-332:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRO

26、DUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General . 9 4.1 General . 9 4.2 Version number 9 4.3 Insulation 9 5 Electrical specification . 9 6 Interface power supply 9 7 Transmission protocol structure . 9 8 Timing . 9 9 Method of operation . 10 9.1 General . 10 9.2 Fe

27、ature type . 10 9.3 Feedback type 10 9.4 Feedback control 10 9.5 Feedback configuration . 11 9.5.1 Feedback timing 11 9.5.2 Feedback brightness . 12 9.5.3 Feedback colour 12 9.5.4 Feedback volume 13 9.5.5 Feedback pitch 13 9.5.6 Manual configuration . 13 10 Declaration of variables . 14 11 Definitio

28、n of commands . 14 11.1 General . 14 11.2 Overview sheets . 14 11.2.1 General . 14 11.2.2 Standard commands 15 11.3 Feedback control commands. 17 11.3.1 General . 17 11.3.2 ACTIVATE FEEDBACK 17 11.3.3 STOP FEEDBACK . 17 11.3.4 SELECT FEEDBACK (instanceGroup) . 17 11.4 Feedback configuration commands

29、 . 17 11.4.1 General . 17 11.4.2 SET FEEDBACK TIMING (DTR0) . 17 11.4.3 SET ACTIVE FEEDBACK COLOUR (DTR0) . 17 11.4.4 SET ACTIVE FEEDBACK BRIGHTNESS (DTR0) 17 11.4.5 SET INACTIVE FEEDBACK COLOUR (DTR0) 17 11.4.6 SET INACTIVE FEEDBACK BRIGHTNESS (DTR0) 18 11.4.7 SET ACTIVE FEEDBACK VOLUME (DTR0) . 18

30、 11.4.8 SET ACTIVE FEEDBACK PITCH (DTR0) . 18 11.5 Feedback queries . 18 2 IEC 62386-332:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General . 9 4.1 General . 9 4.2 Version number 9 4.3 Insulation 9 5 Electrical specification .

31、9 6 Interface power supply 9 7 Transmission protocol structure . 9 8 Timing . 9 9 Method of operation . 10 9.1 General . 10 9.2 Feature type . 10 9.3 Feedback type 10 9.4 Feedback control 10 9.5 Feedback configuration . 11 9.5.1 Feedback timing 11 9.5.2 Feedback brightness . 12 9.5.3 Feedback colour

32、 12 9.5.4 Feedback volume 13 9.5.5 Feedback pitch 13 9.5.6 Manual configuration . 13 10 Declaration of variables . 14 11 Definition of commands . 14 11.1 General . 14 11.2 Overview sheets . 14 11.2.1 General . 14 11.2.2 Standard commands 15 11.3 Feedback control commands. 17 11.3.1 General . 17 11.3

33、.2 ACTIVATE FEEDBACK 17 11.3.3 STOP FEEDBACK . 17 11.3.4 SELECT FEEDBACK (instanceGroup) . 17 11.4 Feedback configuration commands . 17 11.4.1 General . 17 11.4.2 SET FEEDBACK TIMING (DTR0) . 17 11.4.3 SET ACTIVE FEEDBACK COLOUR (DTR0) . 17 11.4.4 SET ACTIVE FEEDBACK BRIGHTNESS (DTR0) 17 11.4.5 SET

34、INACTIVE FEEDBACK COLOUR (DTR0) 17 11.4.6 SET INACTIVE FEEDBACK BRIGHTNESS (DTR0) 18 11.4.7 SET ACTIVE FEEDBACK VOLUME (DTR0) . 18 11.4.8 SET ACTIVE FEEDBACK PITCH (DTR0) . 18 11.5 Feedback queries . 18 BS EN IEC 62386-332:2018IEC 62386-332:2017 IEC 2017 3 11.5.1 General . 18 11.5.2 QUERY FEEDBACK C

35、APABILITY . 18 11.5.3 QUERY FEEDBACK ACTIVE . 18 11.5.4 QUERY FEEDBACK TIMING . 18 11.5.5 QUERY ACTIVE FEEDBACK COLOUR . 18 11.5.6 QUERY ACTIVE FEEDBACK BRIGHTNESS 18 11.5.7 QUERY INACTIVE FEEDBACK COLOUR 18 11.5.8 QUERY INACTIVE FEEDBACK BRIGHTNESS 19 11.5.9 QUERY ACTIVE FEEDBACK VOLUME 19 11.5.10

36、QUERY ACTIVE FEEDBACK PITCH 19 11.6 Special commands 19 Annex A (informative) Feedback types . 20 A.1 Examples of feedback types . 20 A.2 Example of timed feedback . 20 A.3 Example of continuous feedback . 20 A.4 Example of feedback configuration . 21 Figure 1 IEC 62386 graphical overview 6 Figure A

37、.1 Example of timed feedback . 20 Figure A.2 Example of continuous feedback . 21 Figure A.3 Example of feedback configuration . 21 Table 1 ”feedbackCapability” encoding . 10 Table 2 “feedbackTiming” encoding 11 Table 3 Manually configurable variables 13 Table 4 Declaration of additional variables of

38、 each of the features . 14 Table 5 Additional feedback commands . 16 Table A.1 Examples of feedback 20 BS EN IEC 62386-332:2018 4 IEC 62386-332:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 332: Particular requirements Input devices Feedback FO

39、REWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the e

40、lectrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to

41、technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International O

42、rganization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each techn

43、ical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publi

44、cations is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nati

45、onal and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment ser

46、vices and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, ser

47、vants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicat

48、ion, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibilit

49、y that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-332 has been prepared by IEC technical committee 34: Lamps and related equipment. The text of this International Standard is based on the following documents: FDIS Report on voting 34/430/FDIS 34/473/RVD Full information on the voting for the approval of this International Stand