EN 62841-2-4-2014 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-4 Particular requirements for hand-held sanders and.pdf

《EN 62841-2-4-2014 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-4 Particular requirements for hand-held sanders and.pdf》由会员分享，可在线阅读，更多相关《EN 62841-2-4-2014 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-4 Particular requirements for hand-held sanders and.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationElectric motor-operated hand-held tools, transportabletools and lawn and gardenmachinery SafetyPart 2-4: Particular requirements for hand-held sanders and polishers other than disc typeBS EN 62841-2-4:2014BS EN 62841-2-4:2014Incorporating corrigendum October 2015Incorporatin

2、g corrigenda October 2015BS EN 62841-2-4:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62841-2-4:2014. It is identical to IEC 62841-2-4:2014, incorporating corrigendum October 2015. It supersedes BS EN 60745-2-4:2009+A11:2011, which will be withdrawn on 2

3、1 August 2019.NOTE: The BS EN 62841 series supersedes the BS EN 60745 series, the BS EN 61029 series and parts of the BS EN 60335 series (for lawn and garden machinery). BS EN 62841-1:2015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029-

4、1:2009 will be fixed upon publication of all standards in the BS EN 62841-2 and BS EN 62841-3 series.The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on

5、request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 92423 1ICS 25.080.50; 25.140.20; 25.140.3

6、0Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2014.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Correction to sup

7、ersession details in national foreword 31 March 2016 Implementation of IEC corrigendum October 2015: Table 4 updatedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-2-4 August 2014 ICS 25.140.20 Supersedes EN 60745-2-4:2009 English Version Electric motor-operated hand-held tools, transport

8、able tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-4: Exigences particulires pour

9、les ponceuses et lustreuses portatives, autres que du type disque (CEI 62841-2-4:2014) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-4: Besondere Anforderungen fr handgefhrte Schleifer und Polierer auer Tellerschleifer

10、n (IEC 62841-2-4:2014) This European Standard was approved by CENELEC on 2014-05-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis

11、ts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u

12、nder the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,

13、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Commit

14、tee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENEL

15、EC Members. Ref. No. EN 62841-2-4:2014 E BS EN 62841-2-4:2014EN 62841-2-4:2014 - i - Foreword The text of document 116/164/FDIS, future edition 1 of IEC 62841-2-4, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC

16、as EN 62841-2-4:2014. A draft amendment, which covers common modifications to IEC 62841-2-4:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this documenthas to be implemented at nationallevel by p

17、ublication of an identicalnational standard or by endorsement(dop) 2015-05-05 latest date by which the nationalstandards conflicting with thisdocument have to be withdrawn(dow) 2018-05-05 EN 62841-2-4:2014 supersedes EN 60745-2-4:2009 + A11:2011. This document has been prepared under a mandate given

18、 to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Subclauses, tables and figures which are additional

19、to those in Part 1 are numbered starting from 101. This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this

20、 standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2-4 is to be used in conjunction with EN 62841-1:201X 1). When this st

21、andard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Compliance with the clauses of Part 1 together with this Part 2-4 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warnin

22、g: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 12100. 1)At draft stage.BS EN 62841-2-4:2014EN 62841-2-4:2014 - 2 -ForewordThe text of document 116/164/FDIS, f

23、uture edition 1 of IEC 62841-2-4, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote andapproved by CENELEC as EN 62841-2-4:2014.A draft amendment, which covers common modifications to IEC 62841-2-4:2014, was preparedby CLC/TC 116 “Safety

24、of motor-operated electric tools“ and approved by CENELEC.The following dates are fixed: latest date by which this documenthas to be implemented at nationallevel by publication of an identicalnational standard or by endorsement(dop) 2015-05-05 latest date by which the nationalstandards conflicting w

25、ith thisdocument have to be withdrawn(dow) 2018-05-05EN 62841-2-4:2014 supersedes EN 60745-2-4:2009 + A11:2011.This document has been prepared under a mandate given to CENELEC by the EuropeanCommission and the European Free Trade Association, and supports essential requirements ofEU Directive(s).For

26、 the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part ofthis document.Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101.This European Standard is divided into four parts:Part 1: General requirements which are co

27、mmon to most hand-held electric motor operated tools(for the purpose of this standard referred to simply as tools) which could come within thescope of this standard;Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to accoun

28、t for the particular hazards and characteristics ofthese specific tools.This Part 2-4 is to be used in conjunction with EN 62841-1:201X 1). When this standard states “addition“,“modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly.Compliance with the clauses of Pa

29、rt 1 together with this Part 2-4 provides one means of conforming withthe essential health and safety requirements of the Directive concerned.Warning: Other requirements and other EU Directives can be applicable to the products falling withinthe scope of this standard.This European Standard follows

30、the overall requirements of EN ISO 12100.1)At draft stage.BS EN 62841-2-4:2014- ii - EN 62841-2-4:2014 NOTE In this standard the following print types are used: - requirements proper; in roman type - test specifications: in italic type; - explanatory matter: in smaller roman type. Words in bold in t

31、he text are defined in clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. NOTE Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-4:2014 are prefixed “Z”. Attention is drawn to the possibility t

32、hat some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 62841-2-4:2014 4 BS EN 62841-2-4:2014EN 62841-2-4:2014EN 62841-2-4:2014 - i - Foreword The text of document 116/164/FDI

33、S, future edition 1 of IEC 62841-2-4, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-4:2014. A draft amendment, which covers common modifications to IEC 62841-2-4:2014, was prepared by CLC/TC 116 “

34、Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this documenthas to be implemented at nationallevel by publication of an identicalnational standard or by endorsement(dop) 2015-05-05 latest date by which the nationalstandards confl

35、icting with thisdocument have to be withdrawn(dow) 2018-05-05 EN 62841-2-4:2014 supersedes EN 60745-2-4:2009 + A11:2011. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Dire

36、ctive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. This European Standard is divided into four parts: Part 1: General requirem

37、ents which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given

38、 in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2-4 is to be used in conjunction with EN 62841-1:201X 1). When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Complianc

39、e with the clauses of Part 1 together with this Part 2-4 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. Thi

40、s European Standard follows the overall requirements of EN ISO 12100. 1)At draft stage.BS EN 62841-2-4:2014EN 62841-2-4:2014 - 2 -ForewordThe text of document 116/164/FDIS, future edition 1 of IEC 62841-2-4, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CE

41、NELEC parallel vote andapproved by CENELEC as EN 62841-2-4:2014.A draft amendment, which covers common modifications to IEC 62841-2-4:2014, was preparedby CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC.The following dates are fixed: latest date by which this documenthas

42、 to be implemented at nationallevel by publication of an identicalnational standard or by endorsement(dop) 2015-05-05 latest date by which the nationalstandards conflicting with thisdocument have to be withdrawn(dow) 2018-05-05EN 62841-2-4:2014 supersedes EN 60745-2-4:2009 + A11:2011.This document h

43、as been prepared under a mandate given to CENELEC by the EuropeanCommission and the European Free Trade Association, and supports essential requirements ofEU Directive(s).For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part ofthis document.Subclauses, tables

44、and figures which are additional to those in Part 1 are numbered starting from 101.This European Standard is divided into four parts:Part 1: General requirements which are common to most hand-held electric motor operated tools(for the purpose of this standard referred to simply as tools) which could

45、 come within thescope of this standard;Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics ofthese specific tools.This Part 2-4 is to be used in conjunction with EN 628

46、41-1:201X 1). When this standard states “addition“,“modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly.Compliance with the clauses of Part 1 together with this Part 2-4 provides one means of conforming withthe essential health and safety requirements of the Dire

47、ctive concerned.Warning: Other requirements and other EU Directives can be applicable to the products falling withinthe scope of this standard.This European Standard follows the overall requirements of EN ISO 12100.1)At draft stage.BS EN 62841-2-4:2014- ii - EN 62841-2-4:2014 NOTE In this standard t

48、he following print types are used: - requirements proper; in roman type - test specifications: in italic type; - explanatory matter: in smaller roman type. Words in bold in the text are defined in clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bo

49、ld. NOTE Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-4:2014 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 62841-2-4:2014 5 BS EN 62841-2-4:2014EN 62841-2-4:2014 2 IEC 62841-2-4:2014 IEC 2014 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and defin