EN 62841-2-14-2015 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-14 Particular requirements for hand-held planers.pdf

《EN 62841-2-14-2015 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-14 Particular requirements for hand-held planers.pdf》由会员分享，可在线阅读，更多相关《EN 62841-2-14-2015 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-14 Particular requirements for hand-held planers.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationElectric motor-operated hand-held tools, transportable tools and lawn and garden machinery SafetyPart 2-14: Particular requirements for hand-held planersBS EN 62841-2-14:2015BS EN 62841-2-14:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation

2、 of EN 62841-2-14:2015. It is derived from IEC 62841-2-14:2015. It supersedes BS EN 60745-2-14:2009+A2:2010, which will be withdrawn on 31 August 2019.NOTE: The BS EN 62841 series supersedes the BS EN 60745 series, the BS EN 61029 series and parts of the BS EN 60335 series (for lawn and garden machi

3、nery). BS EN 62841-1:2015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029-1:2009 will be fixed upon publication of all standards in the BS EN 62841-2 and BS EN 62841-3 series.The CENELEC common modifications have been implemented at the

4、appropriate places in the text. The start and finish of each common modification is indicated in the text by tags .The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can b

5、e obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 88015 5ICS 25.140.20Complia

6、nce with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPI

7、SCHE NORM EN 62841-2-14 October 2015 ICS 25.140.20 Supersedes EN 60745-2-14:2009 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers (IEC 62841-2-14:2015 , modified) Outils lect

8、roportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-14: Exigences particulires pour les raboteuses portatives (IEC 62841-2-14:2015 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherhe

9、it - Teil 2-14: Besondere Anforderungen fr handgefhrte Hobel (IEC 62841-2-14:2015 , modifiziert) This European Standard was approved by CENELEC on 2015-08-31. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

10、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (Engli

11、sh, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of

12、Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

13、Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights

14、 of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-2-14:2015 E EN 62841-2-14:2015 2 European foreword The text of document 116/222/FDIS, future edition 1 of IEC 62841-2-14, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submi

15、tted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-14:2015. A draft amendment, which covers common modifications to IEC 62841-2-14:2015 (116/222/FDIS), was prepared by CLC/TC 116, “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixe

16、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-08-31 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-08-31 This document will supersed

17、e EN 60745-2-14:2009 + A2:2010. This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2,

18、3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2 is to be used in conjunction with EN 62841-1:2015. When this standard states “addition“

19、, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. This Part 2 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for hand-held planers. Attention is drawn to the poss

20、ibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Tr

21、ade Association and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential

22、 health and safety requirements of the Directive concerned. BS EN 62841-2-14:2015EN 62841-2-14:2015 3 Warning: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 121

23、00. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting

24、 from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-14:2015 are prefixed “Z”. EN 62841-2-14:2015 4 Endorsement notice The text of the International Standard IEC 62841-2-14:2015 was approved by CENELEC as a European Standard with agreed comm

25、on modifications. COMMON MODIFICATIONS 21 Construction Replace the existing subclause 21.18.1.1 with the following: 21.18.1.1 Addition: For planers, the power switch shall not have any locking device to lock it in the “on” position. Replace the title of Annex I by the following: Annex I (normative)

26、Measurement of noise and vibration emissions Annex K (normative) Battery tools and battery packs Add the following new subclause: K.21.18.Z101 Isolation device Planers with an integral battery shall be equipped with an isolation device to prevent the risk of injury from mechanical hazards during use

27、r maintenance that: ensures a reliable disconnection of at least one pole of the battery from the relevant load(s); has a reliable mechanical link between the manual control and the disconnecting element(s); is equipped with an unambiguous indication of the state of the disconnection device which co

28、rresponds to each position of its manual control (actuator); protects against accidental reconnection. NOTE 1 Examples of methods to achieve this disconnection include removable jumpers, removable batteries or an electromechanical power switch with a direct mechanical link between the actuator and t

29、he contact. NOTE 2 The risk of accidental reconnection for a power switch is addressed by the requirement of 21.18.1.2. The other examples in NOTE 1 achieve this by the necessary actions for reconnection. Compliance is checked by inspection. BS EN 62841-2-14:2015 2 BS EN 62841-2-14:2015EN 62841-2-14

30、:2015EN 62841-2-14:2015 2 European foreword The text of document 116/222/FDIS, future edition 1 of IEC 62841-2-14, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-14:2015. A draft amendment, which c

31、overs common modifications to IEC 62841-2-14:2015 (116/222/FDIS), was prepared by CLC/TC 116, “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical nat

32、ional standard or by endorsement (dop) 2016-08-31 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-08-31 This document will supersede EN 60745-2-14:2009 + A2:2010. This European Standard is divided into four parts: Part 1: General requirements

33、 which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in

34、Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2 is to be used in conjunction with EN 62841-1:2015. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. This Part 2 supple

35、ments or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for hand-held planers. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shal

36、l not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For the relationship with EU Directive(

37、s), see informative Annex ZZ, which is an integral part of this document. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive concerned. BS EN 62841-2-14:2015EN 62841-2-14:2015 3 Warning:

38、Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 12100. The following print types are used: - requirements; in roman type - test specifications: in italic type; -

39、notes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2

40、-14:2015 are prefixed “Z”. EN 62841-2-14:2015 4 Endorsement notice The text of the International Standard IEC 62841-2-14:2015 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS 21 Construction Replace the existing subclause 21.18.1.1 with the follow

41、ing: 21.18.1.1 Addition: For planers, the power switch shall not have any locking device to lock it in the “on” position. Replace the title of Annex I by the following: Annex I (normative) Measurement of noise and vibration emissions Annex K (normative) Battery tools and battery packs Add the follow

42、ing new subclause: K.21.18.Z101 Isolation device Planers with an integral battery shall be equipped with an isolation device to prevent the risk of injury from mechanical hazards during user maintenance that: ensures a reliable disconnection of at least one pole of the battery from the relevant load

43、(s); has a reliable mechanical link between the manual control and the disconnecting element(s); is equipped with an unambiguous indication of the state of the disconnection device which corresponds to each position of its manual control (actuator); protects against accidental reconnection. NOTE 1 E

44、xamples of methods to achieve this disconnection include removable jumpers, removable batteries or an electromechanical power switch with a direct mechanical link between the actuator and the contact. NOTE 2 The risk of accidental reconnection for a power switch is addressed by the requirement of 21

45、.18.1.2. The other examples in NOTE 1 achieve this by the necessary actions for reconnection. Compliance is checked by inspection. BS EN 62841-2-14:2015 3 BS EN 62841-2-14:2015EN 62841-2-14:2015BS EN 62841-2-14:2015IEC 62841-2-14:2015 IEC 2015 4 CONTENTSFOREWORD 51 Scope 72 Normative references 73 Terms and definitions 74 General requirements 75 General conditions for the tests 76 Radiation, toxicity and similar hazards 87 Classification 88 Marking and instructions 89 Protection against access to live parts 810 Starting 811 Input and current