EN 62841-2-10-2017 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-10 Particular requirements for hand-held mixers.pdf

《EN 62841-2-10-2017 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-10 Particular requirements for hand-held mixers.pdf》由会员分享，可在线阅读，更多相关《EN 62841-2-10-2017 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-10 Particular requirements for hand-held mixers.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - SafetyPart 2-10: Particular requirements for hand-held mixers (IEC 62841-2-10:2017 , modified)BS EN 62841-2-10:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN ST

2、ANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-2-10 June 2017 ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers (IEC 62841-2-10:2017 , modified) Outils lectropor

3、tatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-10: Exigences particulires pour les mlangeurs manuels (IEC 62841-2-10:2017 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil

4、 2-10: Besondere Anforderungen fr handgefhrte Rhrwerke (IEC 62841-2-10:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-01-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

5、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fr

6、ench, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austri

7、a, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia

8、, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All righ

9、ts of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-2-10:2017 E National forewordThis British Standard is the UK implementation of EN 62841-2-10:2017. It is identical to IEC 62841-2-10:2017.The UK participation in its preparation was entrusted to

10、 Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appli

11、cation. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93491 9ICS 25.140.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Commi

12、ttee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62841-2-10:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-2-10 June 2017 ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn

13、and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers (IEC 62841-2-10:2017 , modified) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-10: Exigences particulires pour les mlangeurs manuels (IEC 62841-2-10:2017

14、 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-10: Besondere Anforderungen fr handgefhrte Rhrwerke (IEC 62841-2-10:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-01-09. CENELEC me

15、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

16、tion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENEL

17、EC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icel

18、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniqu

19、e Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-2-10:2017 E BS EN 62841-2-10:2017EN 62841-2-10:2017 2 Eur

20、opean foreword The text of document 116/303/FDIS, future edition 1 of IEC 62841-2-10, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-10:2017. A draft amendment, which covers common modifications to

21、 IEC 62841-2-10 (116/303/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (d

22、op) 2018-01-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-09 This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this sta

23、ndard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This

24、 Part 2-10 is to be used in conjunction with EN 62841-1:2015. This Part 2-10 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for hand-held mixers. Where a particular subclause of Part 1 is not mentioned in

25、this Part 2-10, that subclause applies as far as relevant. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes

26、: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-10:2

27、017 are prefixed “Z”. This European Standard follows the overall requirements of EN ISO 12100. BS EN 62841-2-10:2017EN 62841-2-10:2017 2 European foreword The text of document 116/303/FDIS, future edition 1 of IEC 62841-2-10, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submi

28、tted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-10:2017. A draft amendment, which covers common modifications to IEC 62841-2-10 (116/303/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: lat

29、est date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-09 This European Standard is divided

30、 into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either s

31、upplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2-10 is to be used in conjunction with EN 62841-1:2015. This Part 2-10 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to conv

32、ert it into the European Standard: Particular requirements for hand-held mixers. Where a particular subclause of Part 1 is not mentioned in this Part 2-10, that subclause applies as far as relevant. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is

33、 to be adapted accordingly. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part

34、 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-10:2017 are prefixed “Z”. This European Standard follows the overall requirements of EN ISO 12100. EN 62841-2-10:2017 3 Attention is drawn to the possibility that s

35、ome of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and suppo

36、rts essential requirements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. Compliance with the clauses of Part 1 together with this Part 2-10 provides one means of conforming with the essential health and safety req

37、uirements of the Directive concerned. BS EN 62841-2-10:2017EN 62841-2-10:2017 4 Endorsement notice The text of the International Standard IEC 62841-2-10:2017 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS 18 Abnormal operation Replace the existi

38、ng subclause 18.8 with the following: 18.8 Replacement of Table 4: Table 4 Required performance levels Type and purpose of SCF Minimum Performance Level (PL) Power switch prevent unwanted switch-on b Power switch provide desired switch-off a Any electronic control to pass the test of 18.3 a Any spee

39、d limiting device Not an SCF Provide desired direction of rotation Not an SCF Prevent exceeding thermal limits as in Clause 18 a Prevent self-resetting as required in 23.3 b Prevent unwanted lock-on of the power switch function a Restart prevention as required by 21.18.1.1 b 21 Construction Replace

40、the note in 21.18.1.1 with the following: For mixers, either the power switch shall be a momentary power switch without having a locking arrangement in the “on” position or the tool shall not restart after an interruption of the mains supply without releasing and re-actuating the power switch. BS EN

41、 62841-2-10:2017EN 62841-2-10:2017 4 Endorsement notice The text of the International Standard IEC 62841-2-10:2017 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS 18 Abnormal operation Replace the existing subclause 18.8 with the following: 18.8

42、Replacement of Table 4: Table 4 Required performance levels Type and purpose of SCF Minimum Performance Level (PL) Power switch prevent unwanted switch-on b Power switch provide desired switch-off a Any electronic control to pass the test of 18.3 a Any speed limiting device Not an SCF Provide desire

43、d direction of rotation Not an SCF Prevent exceeding thermal limits as in Clause 18 a Prevent self-resetting as required in 23.3 b Prevent unwanted lock-on of the power switch function a Restart prevention as required by 21.18.1.1 b 21 Construction Replace the note in 21.18.1.1 with the following: F

44、or mixers, either the power switch shall be a momentary power switch without having a locking arrangement in the “on” position or the tool shall not restart after an interruption of the mains supply without releasing and re-actuating the power switch. EN 62841-2-10:2017 5 Annex I Replace the title o

45、f Annex I with the following: Annex I (normative) Measurement of noise and vibration emissions and delete the note. BS EN 62841-2-10:2017EN 62841-2-10:2017 6 Annex K (normative) Battery tools and battery packs Replace the note with the following: K.21.18.Z101 Isolation and disabling device Tools wit

46、h an integral battery shall either be equipped with an isolation device to prevent the risk of injury from mechanical hazards during servicing or user maintenance; or with a disabling device that prevents unintentional starting of the tool. An isolation device shall provide disconnection of all pole

47、s of the battery from the serviceable region of the tool; be equipped with an unambiguous indication of the state of the disconnection device which corresponds to each position of its manual control (actuator); be provided with protection against accidental reconnection. NOTE 1 Examples of methods t

48、o achieve this disconnection include removable jumpers, integral batteries that can be disconnected for servicing or user maintenance, or an electromechanical power switch with a direct mechanical link between the actuator and the contact. NOTE 2 The risk of accidental reconnection for a power switc

49、h is addressed by the requirement of 21.18.1.2. The other examples in NOTE 1 achieve this by the necessary actions for reconnection. A disabling device may be achieved by any of the following: a self-restoring or non-self-restoring lock-off device where two separate and dissimilar actions are necessary before the motor is switched on (e.g. a power switch which has to be pushed in before it can be moved laterally to close the contacts to start the motor). It shall not be possible to achieve these two actions