EN 62827-2-2017 en Wireless power transfer - Management - Part 2 Multiple device control management.pdf

《EN 62827-2-2017 en Wireless power transfer - Management - Part 2 Multiple device control management.pdf》由会员分享，可在线阅读，更多相关《EN 62827-2-2017 en Wireless power transfer - Management - Part 2 Multiple device control management.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、Wireless power transfer - ManagementPart 2: Multiple device control management (IEC 62827-2:2017)BS EN 62827-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62827-2 September 2017 ICS 29.240.99; 33.160.99; 35

2、.100.01 English Version Wireless power transfer - Management - Part 2: Multiple device control management (IEC 62827-2:2017) Transfert de puissance sans fil - Gestion - Partie 2: Gestion du contrle de dispositifs multiples (IEC 62827-2:2017) Drahtlose Energiebertragung - Management - Teil 2: Mehrfac

3、hgerte Steuerungsmanagemen (IEC 62827-2:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt

4、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other languag

5、e made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Cz

6、ech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

7、United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any mea

8、ns reserved worldwide for CENELEC Members. Ref. No. EN 62827-2:2017 E National forewordThis British Standard is the UK implementation of EN 62827-2:2017. It is identical to IEC 62827-2:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multime

9、dia systems and equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 20

10、17 Published by BSI Standards Limited 2017ISBN 978 0 580 89948 5ICS 29.240.99; 35.100.01; 33.160.99Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 201

11、7.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 628272:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62827-2 September 2017 ICS 29.240.99; 33.160.99; 35.100.01 English Version Wireless power transfer - Management - Part 2: Multiple device control ma

12、nagement (IEC 62827-2:2017) Transfert de puissance sans fil - Gestion - Partie 2: Gestion du contrle de dispositifs multiples (IEC 62827-2:2017) Drahtlose Energiebertragung - Management - Teil 2: Mehrfachgerte Steuerungsmanagemen (IEC 62827-2:2017) This European Standard was approved by CENELEC on 2

13、017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

14、e obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and noti

15、fied to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

16、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalis

17、ation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62827-2:2017 E BS EN 628272:2017EN 62827-2

18、:2017 2 European foreword The text of document 100/2900/FDIS, future edition 1 of IEC 62827-2, prepared by Technical Area 15 “Wireless power transfer“ of IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62827-

19、2:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 20

20、20-07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62827-2:2017 was approved

21、by CENELEC as a European Standard without any modification. BS EN 628272:2017EN 62827-2:2017 2 European foreword The text of document 100/2900/FDIS, future edition 1 of IEC 62827-2, prepared by Technical Area 15 “Wireless power transfer“ of IEC/TC 100 “Audio, video and multimedia systems and equipme

22、nt“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62827-2:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by w

23、hich the national standards conflicting with the document have to be withdrawn (dow) 2020-07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. E

24、ndorsement notice The text of the International Standard IEC 62827-2:2017 was approved by CENELEC as a European Standard without any modification. EN 62827-2:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following do

25、cuments are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When a

26、n International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62827-1

27、- Wireless power transfer - Management - Part 1: Common components EN 62827-1 - BS EN 628272:2017This page deliberately left blank 2 IEC 62827-2:2017 IEC 2017 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 9 2 Normative references 9 3 Terms, definitions and abbreviated terms 9 3.1 Definitions. 9 3.2

28、 Abbreviated terms . 11 4 Overview . 11 5 Functionalities . 13 5.1 General . 13 5.2 Compatibility . 13 5.2.1 General . 13 5.2.2 Indirect control . 14 5.2.3 Direct control . 14 5.3 Initialization 14 5.3.1 General . 14 5.3.2 Frequency band scan 14 5.3.3 Initiation power transfer . 14 5.4 Association .

29、 14 5.4.1 General . 14 5.4.2 Communication connection 14 5.4.3 WPT eligibility check 14 5.5 General charging management . 15 5.5.1 General . 15 5.5.2 Simultaneous WPT 15 5.5.3 Sequential WPT . 15 5.5.4 Foaming WPT 15 5.5.5 Compound WPT 15 5.6 Abnormal status management . 15 5.6.1 General . 15 5.6.2

30、Source status detection . 16 5.6.3 Device status detection 16 5.7 Interdevice WPT management 16 5.8 Termination . 17 6 Protocols . 17 6.1 General . 17 6.2 ID structure . 17 6.2.1 Unique coupler ID 17 6.2.2 Group ID 18 6.2.3 Wireless Power management system ID 18 6.2.4 Device ID . 18 6.3 Frame format

31、 18 6.3.1 General . 18 6.3.2 Frame header 19 6.3.3 Frame body . 19 2 IEC 62827-2:2017 IEC 2017 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 9 2 Normative references 9 3 Terms, definitions and abbreviated terms 9 3.1 Definitions. 9 3.2 Abbreviated terms . 11 4 Overview . 11 5 Functionalities . 13 5

32、.1 General . 13 5.2 Compatibility . 13 5.2.1 General . 13 5.2.2 Indirect control . 14 5.2.3 Direct control . 14 5.3 Initialization 14 5.3.1 General . 14 5.3.2 Frequency band scan 14 5.3.3 Initiation power transfer . 14 5.4 Association . 14 5.4.1 General . 14 5.4.2 Communication connection 14 5.4.3 W

33、PT eligibility check 14 5.5 General charging management . 15 5.5.1 General . 15 5.5.2 Simultaneous WPT 15 5.5.3 Sequential WPT . 15 5.5.4 Foaming WPT 15 5.5.5 Compound WPT 15 5.6 Abnormal status management . 15 5.6.1 General . 15 5.6.2 Source status detection . 16 5.6.3 Device status detection 16 5.

34、7 Interdevice WPT management 16 5.8 Termination . 17 6 Protocols . 17 6.1 General . 17 6.2 ID structure . 17 6.2.1 Unique coupler ID 17 6.2.2 Group ID 18 6.2.3 Wireless Power management system ID 18 6.2.4 Device ID . 18 6.3 Frame format 18 6.3.1 General . 18 6.3.2 Frame header 19 6.3.3 Frame body .

35、19 BS EN 628272:2017IEC 62827-2:2017 IEC 2017 3 6.4 Frame type . 20 6.4.1 General . 20 6.4.2 Data frame 20 6.4.3 Acknowledgement frame 20 6.5 Payload format 21 6.5.1 General . 21 6.5.2 Data frame 21 6.6 Data block 22 6.6.1 General . 22 6.6.2 Request block 22 6.6.3 Response block . 24 6.6.4 Notificat

36、ion block . 25 7 Procedures 27 7.1 General . 27 7.2 Association . 27 7.3 Group ID Setup . 28 7.4 General WPT management . 28 7.4.1 Simultaneous WPT 28 7.4.2 Sequential WPT . 29 7.4.3 Foaming WPT 30 7.4.4 Compound WPT 31 7.5 Abnormal situations management . 32 7.5.1 General . 32 7.5.2 Source status d

37、etection . 32 7.5.3 Device status detection 33 7.6 Interdevice WPT management 34 7.7 Termination . 35 Annex A (informative) Messages 36 A.1 General . 36 A.2 API between application and APP block 36 A.2.1 General . 36 A.2.2 ID display 36 A.2.3 Power status display 36 A.2.4 WPT mode selection display

38、37 A.2.5 Scheduling information display 38 A.2.6 Abnormal situations display . 39 A.3 Interface between MGMT and MGMT 39 A.3.1 General . 39 A.3.2 WPMSD identification 40 A.3.3 WPT authentication . 40 A.3.4 Zone recognition 42 A.3.5 WPT mode . 42 A.3.6 Scheduling information 43 A.3.7 Abnormal situati

39、ons management 44 A.3.8 WPMSD full charge notification 44 A.3.9 WPT termination notification 45 A.3.10 Interdevice WPT 45 A.4 Interface between MGMT block and APP block . 46 A.4.1 General . 46 BS EN 628272:2017IEC 62827-2:2017 IEC 2017 3 6.4 Frame type . 20 6.4.1 General . 20 6.4.2 Data frame 20 6.4

40、.3 Acknowledgement frame 20 6.5 Payload format 21 6.5.1 General . 21 6.5.2 Data frame 21 6.6 Data block 22 6.6.1 General . 22 6.6.2 Request block 22 6.6.3 Response block . 24 6.6.4 Notification block . 25 7 Procedures 27 7.1 General . 27 7.2 Association . 27 7.3 Group ID Setup . 28 7.4 General WPT m

41、anagement . 28 7.4.1 Simultaneous WPT 28 7.4.2 Sequential WPT . 29 7.4.3 Foaming WPT 30 7.4.4 Compound WPT 31 7.5 Abnormal situations management . 32 7.5.1 General . 32 7.5.2 Source status detection . 32 7.5.3 Device status detection 33 7.6 Interdevice WPT management 34 7.7 Termination . 35 Annex A

42、(informative) Messages 36 A.1 General . 36 A.2 API between application and APP block 36 A.2.1 General . 36 A.2.2 ID display 36 A.2.3 Power status display 36 A.2.4 WPT mode selection display 37 A.2.5 Scheduling information display 38 A.2.6 Abnormal situations display . 39 A.3 Interface between MGMT a

43、nd MGMT 39 A.3.1 General . 39 A.3.2 WPMSD identification 40 A.3.3 WPT authentication . 40 A.3.4 Zone recognition 42 A.3.5 WPT mode . 42 A.3.6 Scheduling information 43 A.3.7 Abnormal situations management 44 A.3.8 WPMSD full charge notification 44 A.3.9 WPT termination notification 45 A.3.10 Interde

44、vice WPT 45 A.4 Interface between MGMT block and APP block . 46 A.4.1 General . 46 4 IEC 62827-2:2017 IEC 2017 A.4.2 Data request 46 A.5 Interface between APP layer and MAC layer . 47 A.5.1 General . 47 A.5.2 MAC identification request . 48 A.6 Interface between MGMT block and Coupler Block . 48 A.6

45、.1 General . 48 A.6.2 Scheduling control . 48 A.6.3 Current/voltage sensing . 49 A.6.4 Abnormal situation control . 49 A.6.5 WPT termination control 50 A.6.6 Full charge 50 A.6.7 Inter-device WPT . 51 Figure 1 Usage examples of WPMS services . 12 Figure 2 WPMS structure . 13 Figure 3 Function of int

46、erdevice WPT management . 17 Figure 4 UCID structure . 17 Figure 5 Frame format . 19 Figure 6 Data frame format 20 Figure 7 Acknowledgement frame format . 20 Figure 8 Payload format of data frame . 21 Figure 9 Block format of device status request . 23 Figure 10 Block format of WPT request 23 Figure

47、 11 Block format of coil control request 23 Figure 12 Block format of Group ID setup request 23 Figure 13 Block format of interdevice WPT request 24 Figure 14 Block format of connection response 24 Figure 15 Block format of device status response 24 Figure 16 Block format of WPT response . 24 Figure

48、 17 Block format of coil control response 25 Figure 18 Block format of coil control response 25 Figure 19 Block format of interdevice WPT response . 25 Figure 20 Block format of COM ID notification 25 Figure 21 Block format of WPT ID notification 26 Figure 22 Block format of WPT mode notification .

49、26 Figure 23 Block format of WPT schedule notification 26 Figure 24 Block format of WPT termination request . 26 Figure 25 Block format of full charge notification 26 Figure 26 Block format of discharge rate variation notification 27 Figure 27 Association 27 Figure 28 Group ID setup . 28 Figure 29 Simultaneous WPT . 29 Figure 30 Sequential WPT . 30 Figure 31 Foaming WPT 31 Figure 32 Compound WPT . 32 BS EN 628272:2017IEC 62827-2:2017 IEC