EN 62769-6-2015 en Field Device Integration (FDI) - Part 6 FDI Technology Mapping.pdf

《EN 62769-6-2015 en Field Device Integration (FDI) - Part 6 FDI Technology Mapping.pdf》由会员分享，可在线阅读，更多相关《EN 62769-6-2015 en Field Device Integration (FDI) - Part 6 FDI Technology Mapping.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationField Device Integration (FDI)Part 6: FDI Technology MappingBS EN 62769-6:2015National forewordThis British Standard is the UK implementation of EN 62769-6:2015. It isidentical to IEC 62769-6:2015.The UK participation in its preparation was entrusted to TechnicalCommittee AM

2、T/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its co

3、rrect application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 78328 9ICS 25.040.40; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy a

4、nd Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62769-6:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62769-6 June 2015 ICS 25.040.40; 35.100 English Version Field Device Integration (FDI) - Part 6: FDI Technology

5、 Mapping (IEC 62769-6:2015) Intgration des appareils de terrain (FDI) - Partie 6: Mapping de technologies FDI (IEC 62769-6:2015) Feldgerteintegration (FDI) - Teil 6: Technologieabbildungen (IEC 62769-6:2015) This European Standard was approved by CENELEC on 2015-06-16. CENELEC members are bound to c

6、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENE

7、LEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre

8、 has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

9、 Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Ele

10、ktrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62769-6:2015 E BS EN 62769-6:2015EN 62769-6:2015 2 European foreword The text of document 6

11、5E/349/CDV, future edition 1 of IEC 62769-6, prepared by SC 65E “Devices and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62769-6:2015. The following dates are fix

12、ed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-06-16 Attention is drawn to the

13、possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62769-6:2015 was approved by CENELEC as a European

14、 Standard without any modification. BS EN 62769-6:2015EN 62769-6:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensab

15、le for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

16、 EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61804 series Function Blocks (FB) for process control EN 61804 series IEC 62541 series OPC unified architecture

17、 EN 62541 series IEC 62769-1 - Devices and integration in enterprise systems; Field Device Integration - Part 1: Overview - - IEC 62769-2 - Devices and integration in enterprise systems; Field Device Integration - Part 2: FDI Client - - IEC 62769-4 - Devices and integration in enterprise systems; Fi

18、eld Device Integration - Part 4: FDI Packages - - IEC 62769-5 - Devices and integration in enterprise systems; Field Device Integration - Part 5: FDI Information Model - - ISO/IEC 19505-1 - Information technology - Object Management Group Unified Modeling Language (OMG UML) - Part 1: Infrastructure

19、- - ISO/IEC 29500 series Information technology - Document description and processing languages - Office Open XML File Formats - series BS EN 62769-6:2015 2 IEC 62769-6:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, abbreviated terms, ac

20、ronyms and conventions . 7 3.1 Terms and definitions 7 3.2 Abbreviated terms and acronyms 8 3.3 Symbols 8 4 Technical concepts 8 4.1 General . 8 4.1.1 Overview . 8 4.1.2 Platforms . 9 4.1.3 FDI Type Library 9 4.2 UIP representation 10 4.3 UIP executable representation 10 4.4 UIP executable compatibi

21、lity rules 11 4.5 Allowed .NET Common Language Run-time versions 11 4.5.1 General . 11 4.5.2 CLR compatibility strategy . 11 4.5.3 How to identify the .NET target platform of a UIP . 12 4.6 Installing UIP 12 4.7 UIP Lifecycle. 13 4.7.1 General . 13 4.7.2 UIP Assembly activation steps . 13 4.7.3 UIP

22、Assembly deactivation steps . 15 4.8 Interaction between an FDI Client and a UIP . 16 4.8.1 Handling of standard UI elements 16 4.8.2 Non-blocking service execution . 16 4.8.3 Blocking service execution. 17 4.8.4 Cancel service execution . 18 4.8.5 Threading 19 4.8.6 Timeout . 19 4.8.7 Exception han

23、dling 20 4.8.8 Type safe interfaces 21 4.8.9 Globalization and localization 21 4.8.10 WPF Control handling 21 4.8.11 Win Form handling . 21 4.9 Security 21 4.9.1 General . 21 4.9.2 Access permissions . 22 4.9.3 Code identity concept 23 5 Interface definition . 23 Bibliography 27 Figure 1 FDI Type Li

24、brary structure 10 BS EN 62769-6:2015IEC 62769-6:2015 IEC 2015 3 Figure 2 .NET surrogate process . 12 Figure 3 Identification of Run-time Version. 12 Figure 4 IAsyncPattern based asynchronous service execution example 17 Figure 5 Blocking service execution example using IAsyncResult based pattern 18

25、 Figure 6 Cancel service processing sequence example . 18 Figure 7 Exception source . 20 Table 1 Technology edition reference 9 Table 2 Base Property Services . 24 Table 3 Device Model Services 24 Table 4 Access Control Services 24 Table 5 Direct Access Services 24 Table 6 Hosting Services . 25 Tabl

26、e 7 UIP Services . 25 Table 8 Base Data Types . 26 Table 9 Special Types . 26 BS EN 62769-6:2015 4 IEC 62769-6:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIELD DEVICE INTEGRATION (FDI) Part 6: FDI Technology Mapping FOREWORD 1) The International Electrotechnical Commission (IEC) is a

27、worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to oth

28、er activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the

29、subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions

30、 determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National

31、Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in

32、which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publ

33、ication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is

34、 not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its tec

35、hnical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IE

36、C Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 62769-6 has been prepared by subcommittee 65E: Devices and integration in enter

37、prise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the following documents: CDV Report on voting 65E/349/CDV 65E/426/RVD Full information on the voting for the approval of this standard can be found in the repor

38、t on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62769 series, published under the general title Field Device Integration (FDI), can be found on the IEC website. BS EN 62769-6:2015IEC 62769-6

39、:2015 IEC 2015 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, r

40、eplaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS E

41、N 62769-6:2015 6 IEC 62769-6:2015 IEC 2015 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning a) Method for the Supplying and Installation of Device-Specific Func

42、tionalities, see Patent Family DE10357276; b) Method and device for accessing a functional module of automation system, see Patent Family EP2182418; c) Methods and apparatus to reduce memory requirements for process control system software applications, see Patent Family US2013232186; d) Extensible

43、Device Object Model, see Patent Family US12/893,680. IEC takes no position concerning the evidence, validity and scope of this patent right. The holders of these patent rights have assured the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discrimi

44、natory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: a) ABB Research Ltd Claes Rytoft Affolterstrasse 4 Zurich, 8050 Switzerland b) Phoenix Contact GmbH BS EN 6276

45、9-6:2015IEC 62769-6:2015 IEC 2015 13 called the UIP folder structure. The FDI Client shall manage the UIP folder structure. The UIP folder structure shall separate the UIP Variants from each other in order to avoid file name conflicts. UIP executables shall be installed to a path that allows browse

46、read and write access. Since the FDI Client manages the folder structure the UIP shall not perform any access to an absolute path. Any file access shall be done relative to the installation root of the UIP. According the version management described in IEC 62769-4, the coexistence of major version c

47、hanges of UIP of the same type shall be supported. This shall be done by installing a newer UIP into a separate folder. The “strong-name” rule ensures that related Assemblies can coexist during runtime. The FDI Client implementation ensures that UIP deployment works independently from current user c

48、redentials. (See the NOTE below.) NOTE Certain operating system managed folders require specific access rights, for example, modifications in folder “Program Files” require “Administrator” rights. The Windows operating system provides several means to allow an application running with restricted use

49、r rights, to execute actions with administrator privileges transparent to the user, for example, special restriction handling for identified directories, services with administration rights, executables that are configured to automatically run with administration rights. The alternative is to copy UIP executables into folders writeable for “normal” users. 4.7 UIP Lifecycle 4.7.1 General The UIP state machine, outlined in IEC 62769-4, is composed of the Loaded, Creat