EN 62453-301-2009 en Field device tool (FDT) interface specification - Part 301 Communication profile integration - IEC 61784 CPF 1 (Incorporates Amendment A1 2017)《现场装置工具(FDT)接口规范.pdf

《EN 62453-301-2009 en Field device tool (FDT) interface specification - Part 301 Communication profile integration - IEC 61784 CPF 1 (Incorporates Amendment A1 2017)《现场装置工具(FDT)接口规范.pdf》由会员分享，可在线阅读，更多相关《EN 62453-301-2009 en Field device tool (FDT) interface specification - Part 301 Communication profile integration - IEC 61784 CPF 1 (Incorporates Amendment A1 2017)《现场装置工具(FDT)接口规范.pdf（132页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 301: Communication profile integration IEC 61784 CPF 1BS EN 62453-301:2009National forewordThis British Standard is the UK imp

2、lementation of EN 62453-301:2009. It isidentical to IEC 62453-301:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtain

3、ed onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62560 2ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal o

4、bligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62453-301:2009EUROPEAN STANDARD EN 62453-301 NORME EUROPENNE EUROPISCHE NORM October

5、2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserv

6、ed worldwide for CENELEC members. Ref. No. EN 62453-301:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 (IEC 62453-301:2009) Spcification des interfaces des outils des dispositifs

7、de terrain (FDT) - Partie 301: Intgration des profils de communication - CEI 61784 CPF 1 (CEI 62453-301:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 301: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 1 nach IEC 61784 (IEC 62453-301:2009) This European

8、 Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co

9、ncerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member in

10、to its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel

11、and, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62453-301:2009EN 62453-301:2009 - 2 - Foreword The text of document 65E/125/FDIS, future edition 1 of IEC 62453-301, prep

12、ared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-301 on 2009-08-01. Each part of the EN 62453-3xy series is intended to be read i

13、n conjunction with EN 62453-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdr

14、awn (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-301:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 62453-301:2009- 3 - EN 62453-301:2009 Annex ZA (normative) Normative references to

15、international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

16、any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61158-2 1)Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specificatio

17、n and service definition EN 61158-2 20082)IEC 61158-3-1 1)Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements EN 61158-3-1 20082)IEC 61158-4-1 2007 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-li

18、nk layer protocol specification - Type 1 elements EN 61158-4-1 2008 IEC 61158-5-5 1)Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements EN 61158-5-5 20082)IEC 61158-5-9 1)Industrial communication networks - Fieldbus specifica

19、tions - Part 5-9: Application layer service definition - Type 9 elements EN 61158-5-9 20082)IEC 61158-6-5 1)Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements EN 61158-6-5 20082)IEC 61158-6-9 1)Industrial communication n

20、etworks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements EN 61158-6-9 20082)IEC 61784-1 1)Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 20082)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part

21、1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 ISO/IEC 646 1)Information technology - ISO 7-bit coded character set for information interchange - - 1)Undated reference. 2)Valid edit

22、ion at date of issue. BS EN 62453-301:2009 2 62453-301 IEC:2009(E) CONTENTS INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Terms, definitions, symbols, abbreviated terms and conventions 9 3.1 Terms and definitions 9 3.2 Abbreviated terms .9 3.3 Conventions 9 3.3.1 Data type names and reference

23、s to data types 9 3.3.2 Vocabulary for requirements9 3.3.3 Use of UML .10 4 Fundamentals.10 4.1 System and FDT topology .10 4.2 FDT topology for H1 devices .10 4.3 FDT topology for HSE devices.11 4.4 Nested communication 13 5 Bus category 14 6 Access to instance and device data14 6.1 DTM 14 6.2 BTM

24、14 7 Protocol specific behavior.15 7.1 Connection management.15 7.1.1 FMS connection.15 7.1.2 FDT connection .16 7.2 Abort .16 7.2.1 OnAbort Indication.16 7.2.2 Abort request.17 7.3 Relation of FMS requests and FMS responses 17 7.4 Subscription mechanism18 7.4.1 General .18 7.4.2 Transactions for su

25、bscribing H1 18 7.4.3 Transactions for subscribing HSE19 7.4.4 Transactions for subscribing BTM20 8 Protocol specific usage of general data types.20 8.1 Address.20 8.2 protocolID .20 8.3 applicationDomain.20 8.4 semanticId.21 8.4.1 Block specific definitions .21 8.4.2 Fieldbus management definitions

26、 21 8.4.3 Fieldbus specific definitions.21 9 Protocol specific data types22 9.1 DTM 22 9.1.1 Topology scan definitions 22 9.1.2 Parameter access22 BS EN 62453-301:200962453-301 IEC:2009(E) 3 9.1.3 FF device data types .28 9.2 BTM 29 9.2.1 General .29 9.2.2 Parameter access - FF specific definitions.

27、29 10 Network management data types43 10.1 General .43 10.2 H1 network management definitions 43 10.3 HSE network management data types .43 11 Communication data types .85 11.1 Common data types 85 11.2 FF FMS data types90 11.3 H1 communication data types96 11.4 HSE communication data types .103 11.

28、5 FDT FF standard block communication data types.110 12 Channel parameter data types112 13 Device identification .114 13.1 Protocol specific handling of data type STRING 114 13.2 Common device type identification data types .115 13.3 Scan identification data types121 13.4 Device type identification

29、data types provided by DTM .121 Annex A (informative) Implementation hints .123 Annex B (normative) Levels of support.125 Bibliography128 Figure 1 Part 301 of the IEC 62453 series .7 Figure 2 Object relations for H1 Device DTM .10 Figure 3 Object relations for HSE application with DTMs and BTMs.12 F

30、igure 4 FMS mapping in the FDT connection15 Figure 5 FDT Disconnect service .16 Table 1 Object relations for H1 Device DTM 11 Table 2 Object relations for HSE application wtith DTMs and BTMs .13 Table 3 FF specific protocol identifiers.14 Table 4 Relation of FMS requests and FMS responses 17 Table 5

31、 Action object definitions (refer to FF-890):.23 Table 6 Link object definitions23 Table 7 Alert object definitions.24 Table 8 Trend object definitions .26 Table 9 View definition.27 Table 10 Domain object definitions 27 Table 11 Program invocation object definitions 28 Table 12 Structured FF device

32、 data types 29 Table 13 Parameter mnemonic 30 Table 14 Mnemonic of structured data types 38 Table 15 Simple common data types42 BS EN 62453-301:2009 4 62453-301 IEC:2009(E) Table 16 H1 Fieldbus Management data types.43 Table 17 Simple HSE Fieldbus Management Definitions 43 Table 18 Structured HSE Ne

33、twork management data types49 Table 19 Simple common data types85 Table 20 Structured common data types 87 Table 21 Simple FF FMS data types 90 Table 22 Structured FF FMS data types.91 Table 23 Simple H1 communication data types 97 Table 24 Structured H1 communication data types.98 Table 25 Simple H

34、SE communication data types .103 Table 26 Structured HSE communication data types 104 Table 27 Block communication data types111 Table 28 Simple FF channel data types .112 Table 29 Structured FF channel data types113 Table 30 FieldbusFoundation H1 table.115 Table 31 FieldbusFoundation HSE.117 Table

35、32 FieldbusFoundation blocks 119 Table 33 Simple Fieldbus Scan definitions.121 Table 34 Device identification data types .122 Table B.1 Levels of support .126 BS EN 62453-301:200962453-301 IEC:2009(E) 7 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field De

36、vice Tool) components for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly

37、. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in ext

38、ensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the

39、 field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration is in general open for all kinds of fieldbusses and thus meets the requirements for integrating different kinds of devices into h

40、eterogeneous control systems. Figure 1 shows how IEC 62453-301 is aligned in the structure of the IEC 62453 series. Part 301Communicationprofile integration IEC 61784 CPF 1Figure 1 Part 301 of the IEC 62453 series IEC 1120/09 BS EN 62453-301:2009 8 62453-301 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTER

41、FACE SPECIFICATION Part 301: Communication profile integration IEC 61784 CPF 1 1 Scope Communication Profile Family 1 (commonly known as FOUNDATIONFieldbus1) defines communication profiles based on IEC 61158-2, Type 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5, and IE

42、C 61158-6-9. The basic profiles CP 1/1 (FF H1) and CP 1/2 (FF HSE) are defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the FOUNDATION Fieldbus (FF) protocol into the FDT standard (IEC 62453-2). The standard describes communication definitions, protocol specific ex

43、tensions and the means for block (e.g. transducer, resource or function blocks) representation. The new protocol specific definitions are based on FF-specifications for H1 and HSE protocols. Furthermore, the definitions contain information that is needed by systems to configure FF devices. The scope

44、 is limited to FOUNDATION Fieldbus device and system specific definitions. 2 Normative references The following referenced documents are indispensable for the application of this specification. For dated references, only the edition cited applies. For undated references, the latest edition of the re

45、ferenced document (including any amendments) applies IEC 61158-2, Industrial communication networks Fieldbus specifications Part 2: Physical layer specification and service definition IEC 61158-3-1, Industrial communication networks Fieldbus specifications Part 3-1: Data-link layer service definitio

46、n Type 1 elements IEC 61158-4-1:2007, Industrial communication networks Fieldbus specifications Part 4-1 Data-link layer protocol specification Type 1 elements IEC 61158-5-5, Industrial communication networks Fieldbus specifications Part 5-5: Application layer service definition Type 5 elements IEC

47、61158-5-9, Industrial communication networks Fieldbus specifications Part 5-9: Application layer service definition Type 9 elements IEC 61158-6-5, Industrial communication networks Fieldbus specifications Part 6-5: Application layer protocol specification Type 5 elements 1FOUNDATION Fieldbus is a tr

48、ade name of the non-profit organization Fieldbus Foundation. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trade name holder or any of its products. Compliance to this standard does not require use of the tr

49、ade name Foundation Fieldbus. Use of the trade name FOUNDATION Fieldbus requires permission of Fieldbus Foundation. BS EN 62453-301:200962453-301 IEC:2009(E) 9 IEC 61158-6-9, Industrial communication networks Fieldbus specifications Part 6-9: Application layer protocol specification Type 9 elements IEC 61784-1, Industrial communication networks Profiles