EN 62343-1-2-2015 en Dynamic modules - Part 1-2 Performance standards - Tuneable chromatic dispersion compensator (non-connectorized).pdf

《EN 62343-1-2-2015 en Dynamic modules - Part 1-2 Performance standards - Tuneable chromatic dispersion compensator (non-connectorized).pdf》由会员分享，可在线阅读，更多相关《EN 62343-1-2-2015 en Dynamic modules - Part 1-2 Performance standards - Tuneable chromatic dispersion compensator (non-connectorized).pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationDynamic modulesPart 1-2: Performance standards Tuneable chromatic dispersion compensator (non-connectorized)BS EN 62343-1-2:2015National forewordThis British Standard is the UK implementation of EN 62343-1-2:2015. It isidentical to IEC 62343-1-2:2015. It supersedes BS EN 623

2、43-1-2:2008 whichis withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publi

3、cation does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 85513 9ICS 33.180.30Compliance with a British Standard cannot confer immunity

4、fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62343-1-2:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 623

5、43-1-2 November 2015 ICS 33.180.30 Supersedes EN 62343-1-2:2008 English Version Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized) (IEC 62343-1-2:2015) Modules dynamiques - Partie 1-2: Normes de performance - Compensateur de dispersion c

6、hromatique rglable (non connectoris) (IEC 62343-1-2:2015) Dynamische Module - Teil 1-2: Betriebsverhaltensnormen - Einstellbarer Kompensator fr chromatische Dispersion (nicht mit Steckern versehen) (IEC 62343-1-2:2015) This European Standard was approved by CENELEC on 2015-07-30. CENELEC members are

7、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t

8、he CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Manage

9、ment Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel

10、and, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Kom

11、itee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62343-1-2:2015 E BS EN 62343-1-2:2015EN 62343-1-2:2015 2 European foreword The t

12、ext of document 86C/1315/FDIS, future edition 2 of IEC 62343-1-2, prepared by SC 86C “Fibre optic systems and active devices” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62343-1-2:2015. The following dates are fixed: latest date by which t

13、he document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-05-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-30 This document supersedes EN 62343-1-2:2008. It const

14、itutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) substantial addition of definitions and removal of type C performances. b) change in the title to reflect standard terminology. Attention is drawn to the possibilit

15、y that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62343-1-2:2015 was approved by CENELEC as a European Standar

16、d without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62343-1 NOTE Harmonized as EN 62343-1 1). IEC 62343-1-3 NOTE Harmonized as EN 62343-1-3. 1)At draft stage. BS EN 62343-1-2:2015EN 62343-1-2:2015 3 Annex ZA (no

17、rmative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For un

18、dated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European

19、 Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-14 - Fibre optic interconnectin

20、g devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization

21、 dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices EN 61300-3-29 - IEC 61

22、300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3-32 - IEC 61300-3-38 - Fibre optic interconnecting devices and

23、passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple EN 61300-3-38 - BS EN 62343-1-2:2015EN 62343-1-2:2015 4 Publication Year Title EN/HD Year IEC 61753-021-2 - Fibre optic interconnecting devices an

24、d passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 - IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification EN 62074-1

25、- IEC 62343 - Dynamic modules - General and guidance EN 62343 - ITU-T Recommendation G.671 - Transmission characteristics of optical components and subsystems - - ITU-T Recommendation G.692 - Optical interfaces for multichannel systems with optical amplifiers - - ITU-T G-series Recommendations - Sup

26、plement 39 Optical system design and engineering considerations - - BS EN 62343-1-2:2015 2 IEC 62343-1-2:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references. 5 3 Terms and definitions 6 4 Test 7 4.1 General . 7 4.2 Module 7 4.3 Spectral bands 7 5 Test report. 8 6 Performance require

27、ments . 8 6.1 Dimensions . 8 6.2 Sample size 8 6.3 Test details and requirements 8 Bibliography . 11 Table 1 Spectral bands for single-mode systems (ITU-T G Suppl. 39) . 8 Table 2 Test and requirements for type A (Multi/single channel type TDC with large dispersion variable range) . 9 Table 3 Test a

28、nd requirements for type B (Multi/single channel type TDC with standard dispersion variable range) . 10 BS EN 62343-1-2:2015IEC 62343-1-2:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DYNAMIC MODULES Part 1-2: Performance standards Tuneable chromatic dispersion compensator (non-connect

29、orized) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizatio

30、n in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is ent

31、rusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Inter

32、national Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since

33、each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of

34、 IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in

35、their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity asse

36、ssment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, empl

37、oyees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of th

38、e publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the

39、possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62343-1-2 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of I

40、EC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) substantial addition of definitions a

41、nd removal of type C performances. b) change in the title to reflect standard terminology. BS EN 62343-1-2:2015 4 IEC 62343-1-2:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting 86C/1315/FDIS 86C/1336/RVD Full information on the voting for the approva

42、l of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62343 series, published under the general title Dynamic modules, can be found on the IEC website.

43、The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revi

44、sed edition, or amended. BS EN 62343-1-2:2015IEC 62343-1-2:2015 IEC 2015 5 DYNAMIC MODULES Part 1-2: Performance standards Tuneable chromatic dispersion compensator (non-connectorized) 1 Scope This part of IEC 62343 contains the recommended minimum initialization test and measurement requirements an

45、d severities for optical tuneable chromatic dispersion compensators (TDC). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated ref

46、erences, the latest edition of the referenced document (including any amendments) applies. IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance IEC 61300-2-14, Fibre optic interconnecting devices and passive compon

47、ents Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61

48、300-3-29, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-29: Examinations and measurements Spectral transfer characteristics of DWDM devices IEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic test and measurement

49、procedures Part 3-32: Examinations and measurements Polarization mode dispersion measurement for passive optical components IEC 61300-3-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: Examinations and measurements Group delay, chromatic dispersion and phase ripple IEC 61753-021-2, Fibre optic interconnecting devices and passive components performance standard Part 021-2: Grade C/3 sing