EN 62150-5-2017 en Fibre optic active components and devices - Test and measurement procedures - Part 5 Wavelength channel tuning time of tuneable transmitters.pdf

《EN 62150-5-2017 en Fibre optic active components and devices - Test and measurement procedures - Part 5 Wavelength channel tuning time of tuneable transmitters.pdf》由会员分享，可在线阅读，更多相关《EN 62150-5-2017 en Fibre optic active components and devices - Test and measurement procedures - Part 5 Wavelength channel tuning time of tuneable transmitters.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、Fibre optic active components and devices - Test and measurement proceduresPart 5: Wavelength channel tuning time of tuneable transmittersBS EN 621505:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62150-5 Aug

2、ust 2017 ICS 33.180.20 English Version Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters (IEC 62150-5:2017) Composants et dispositifs actifs fibres optiques - Procdures dessais et de mesures - Partie 5: Dure

3、daccordement des metteurs accordables en longueur donde (IEC 62150-5:2017) Aktive Lichtwellenleiter-Bauteile und -Bauelemente - Prf- und Messverfahren - Teil 5: Wellenlngenkanal-Abstimmzeit von abstimmbaren Sendern (IEC 62150-5:2017) This European Standard was approved by CENELEC on 2017-06-15. CENE

4、LEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on a

5、pplication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN

6、-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary

7、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrote

8、chnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62150-5:2017 E National forewordThis British Standard is

9、the UK implementation of EN 621505:2017. It is identical to IEC 621505:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can be obtained on request to its secretary.

10、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 89394 0ICS 33.180.20Compliance with a British Standard cannot confe

11、r immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 621505:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

12、NORM EN 62150-5 August 2017 ICS 33.180.20 English Version Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters (IEC 62150-5:2017) Composants et dispositifs actifs fibres optiques - Procdures dessais et de mesure

13、s - Partie 5: Dure daccordement des metteurs accordables en longueur donde (IEC 62150-5:2017) Aktive Lichtwellenleiter-Bauteile und -Bauelemente - Prf- und Messverfahren - Teil 5: Wellenlngenkanal-Abstimmzeit von abstimmbaren Sendern (IEC 62150-5:2017) This European Standard was approved by CENELEC

14、on 2017-06-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m

15、ay be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and

16、notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

17、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Norm

18、alisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62150-5:2017 E BS EN 621505:2017EN 621

19、50-5:2017 2 European foreword The text of document 86C/1440/FDIS, future edition 1 of IEC 62150-5, prepared by SC 86C “Fibre optic systems and active devices“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62150-5:2017. The following dates ar

20、e fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-15 Attention is drawn to

21、 the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62150-5:2017 was approved by CENELEC as a European Stand

22、ard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60191 Series NOTE Harmonized as EN 60191 Series. IEC 60747-5 Series NOTE Harmonized as EN 60747-5 Series. IEC 60825 Series NOTE Harmonized as EN 60825 Series

23、. IEC 62149-1 NOTE Harmonized as EN 62149-1. IEC 62150-1 NOTE Harmonized as EN 62150-1. IEC 62522 NOTE Harmonized as EN 62522. 2 IEC 62150-5:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviated terms 6 3.1 Terms and definitions

24、6 3.2 Abbreviated terms . 7 4 Apparatus 7 4.1 Tuneable transmitter under test 7 4.2 Optical filter set. 7 4.3 Optical-to-electrical (O/E) converter with low-pass filter (LPF). 7 4.4 Oscilloscope . 8 4.5 Control unit . 8 5 Testing and measuring procedures 8 5.1 General . 8 5.2 Measurement procedures

25、9 6 Test results . 9 6.1 Required information . 9 6.2 Information to be available on request 10 Annex A (normative) Optical filter set . 11 A.1 General . 11 A.2 Arrayed waveguide grating filter 11 A.2.1 Setup . 11 A.2.2 Optical spectrum of arrayed waveguide grating filter 11 A.2.3 Illustration of wa

26、velength channel tuning time 12 A.3 Etalon filter . 12 A.3.1 Setup . 12 A.3.2 Optical spectrum of etalon filter . 13 A.3.3 Illustration of wavelength channel tuning time 13 Bibliography 14 Figure 1 Illustration of wavelength channel tuning time 8 Figure 2 Measurement setup for wavelength channel tun

27、ing time . 9 Figure A.1 Measurement setup using arrayed waveguide grating filter . 11 Figure A.2 Optical spectrum of arrayed waveguide grating filter . 11 Figure A.3 Wavelength channel tuning time using arrayed waveguide grating filter 12 Figure A.4 Measurement setup using etalon filter . 12 Figure

28、A.5 Optical spectrum of etalon filter 13 Figure A.6 Wavelength channel tuning time using etalon filter 13 BS EN 621505:2017EN 62150-5:2017 2 European foreword The text of document 86C/1440/FDIS, future edition 1 of IEC 62150-5, prepared by SC 86C “Fibre optic systems and active devices“ of IEC/TC 86

29、 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62150-5:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-15 late

30、st date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-15 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such pate

31、nt rights. Endorsement notice The text of the International Standard IEC 62150-5:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60191 Series NOTE Harmonized

32、 as EN 60191 Series. IEC 60747-5 Series NOTE Harmonized as EN 60747-5 Series. IEC 60825 Series NOTE Harmonized as EN 60825 Series. IEC 62149-1 NOTE Harmonized as EN 62149-1. IEC 62150-1 NOTE Harmonized as EN 62150-1. IEC 62522 NOTE Harmonized as EN 62522. 2 IEC 62150-5:2017 IEC 2017 CONTENTS FOREWOR

33、D . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviated terms 6 3.1 Terms and definitions 6 3.2 Abbreviated terms . 7 4 Apparatus 7 4.1 Tuneable transmitter under test 7 4.2 Optical filter set. 7 4.3 Optical-to-electrical (O/E) converter with low-pass filter (L

34、PF). 7 4.4 Oscilloscope . 8 4.5 Control unit . 8 5 Testing and measuring procedures 8 5.1 General . 8 5.2 Measurement procedures 9 6 Test results . 9 6.1 Required information . 9 6.2 Information to be available on request 10 Annex A (normative) Optical filter set . 11 A.1 General . 11 A.2 Arrayed wa

35、veguide grating filter 11 A.2.1 Setup . 11 A.2.2 Optical spectrum of arrayed waveguide grating filter 11 A.2.3 Illustration of wavelength channel tuning time 12 A.3 Etalon filter . 12 A.3.1 Setup . 12 A.3.2 Optical spectrum of etalon filter . 13 A.3.3 Illustration of wavelength channel tuning time 1

36、3 Bibliography 14 Figure 1 Illustration of wavelength channel tuning time 8 Figure 2 Measurement setup for wavelength channel tuning time . 9 Figure A.1 Measurement setup using arrayed waveguide grating filter . 11 Figure A.2 Optical spectrum of arrayed waveguide grating filter . 11 Figure A.3 Wavel

37、ength channel tuning time using arrayed waveguide grating filter 12 Figure A.4 Measurement setup using etalon filter . 12 Figure A.5 Optical spectrum of etalon filter 13 Figure A.6 Wavelength channel tuning time using etalon filter 13 BS EN 621505:2017IEC 62150-5:2017 IEC 2017 3 INTERNATIONAL ELECTR

38、OTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES TEST AND MEASUREMENT PROCEDURES Part 5: Wavelength channel tuning time of tuneable transmitters FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national el

39、ectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Speci

40、fications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internat

41、ional, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal

42、 decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for

43、international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)

44、In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall

45、be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certific

46、ation bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury

47、, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cit

48、ed in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifyi

49、ng any or all such patent rights. International Standard IEC 62150-5 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86C/1440/FDIS 86C/1445/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in acc