EN 61970-452-2017 en Energy management system application program interface (EMS-API) - Part 452 CIM static transmission network model profiles.pdf

《EN 61970-452-2017 en Energy management system application program interface (EMS-API) - Part 452 CIM static transmission network model profiles.pdf》由会员分享，可在线阅读，更多相关《EN 61970-452-2017 en Energy management system application program interface (EMS-API) - Part 452 CIM static transmission network model profiles.pdf（182页珍藏版）》请在麦多课文档分享上搜索。

1、Energy management system application program interface (EMS-API)Part 452: CIM static transmission network model profiles (IEC 61970-452:2017)BS EN 61970-452:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61970

2、-452 November 2017 ICS 33.200 Supersedes EN 61970-452:2015 English Version Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles (IEC 61970-452:2017) Interface de programmation dapplication pour systme de gestion dnergie (EMS-API)

3、 - Partie 452: Profils du modle de rseau de transport statique CIM (IEC 61970-452:2017) Schnittstelle fr Anwendungsprogramme fr Netzfhrungssysteme (EMS-API) - Teil 452: CIM-Statische-bertragungsnetzwerk-Modell-Profile (IEC 61970-452:2017) This European Standard was approved by CENELEC on 2017-08-30.

4、 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

5、 on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to th

6、e CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu

7、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Elec

8、trotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61970-452:2017 E National forewordThis British Stand

9、ard is the UK implementation of EN 61970-452:2017. It is identical to IEC 61970-452:2017. It supersedes BS EN 61970-452:2015, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange.A list of

10、 organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limit

11、ed 2017ISBN 978 0 580 95205 0ICS 33.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text a

12、ffectedBRITISH STANDARDBS EN 61970452:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61970-452 November 2017 ICS 33.200 Supersedes EN 61970-452:2015 English Version Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles (

13、IEC 61970-452:2017) Interface de programmation dapplication pour systme de gestion dnergie (EMS-API) - Partie 452: Profils du modle de rseau de transport statique CIM (IEC 61970-452:2017) Schnittstelle fr Anwendungsprogramme fr Netzfhrungssysteme (EMS-API) - Teil 452: CIM-Statische-bertragungsnetzwe

14、rk-Modell-Profile (IEC 61970-452:2017) This European Standard was approved by CENELEC on 2017-08-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration

15、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made

16、by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Rep

17、ublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

18、Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means rese

19、rved worldwide for CENELEC Members. Ref. No. EN 61970-452:2017 E BS EN 61970452:2017EN 61970-452:2017 2 European foreword The text of document 57/1868/FDIS, future edition 3 of IEC 61970-452, prepared by IEC/TC 57 “Power systems management and associated information exchange“ was submitted to the IE

20、C-CENELEC parallel vote and approved by CENELEC as EN 61970-452:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-05-30 latest date by which the national standar

21、ds conflicting with the document have to be withdrawn (dow) 2020-08-30 This document supersedes EN 61970-452:2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all su

22、ch patent rights. Endorsement notice The text of the International Standard IEC 61970-452:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61970-1 NOTE Harmon

23、ized as EN 61970-1. IEC/TS 61970-2 NOTE Harmonized as CLC/TS 61970-2. IEC 61970-552 NOTE Harmonized as EN 61970-552. BS EN 61970452:2017EN 61970-452:2017 2 European foreword The text of document 57/1868/FDIS, future edition 3 of IEC 61970-452, prepared by IEC/TC 57 “Power systems management and asso

24、ciated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61970-452:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop)

25、2018-05-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-08-30 This document supersedes EN 61970-452:2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall n

26、ot be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61970-452:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added

27、for the standards indicated: IEC 61970-1 NOTE Harmonized as EN 61970-1. IEC/TS 61970-2 NOTE Harmonized as CLC/TS 61970-2. IEC 61970-552 NOTE Harmonized as EN 61970-552. EN 61970-452:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publi

28、cations The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments

29、) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Titl

30、e EN/HD Year IEC 61968-13 - Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution EN 61968-13 - IEC 61970-301 2016 Energy Management System Application Program Interface (EMS-API) - Part 301: Common inf

31、ormation model (CIM) base EN 61970-301 2017 IEC 61970-456 - Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles EN 61970-456 - IEC 61970-501 - Energy management system application program interface (EMS-API) - Part 501: Common Information M

32、odel Resource Description Framework (CIM RDF) schema EN 61970-501 - IEC 61970-552 - Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format EN 61970-552 - BS EN 61970452:2017This page deliberately left blank 2 IEC 61970-452:2017 IEC 2017 CONTENTS FOR

33、EWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 8 3 Terms and definitions 8 4 Overview of data requirements 8 4.1 Overview. 8 4.2 General requirements . 9 4.3 Transformer modeling . 9 4.4 Modeling authorities 11 4.5 Use of measurement classes 11 4.5.1 General . 11 4.5.2 ICCP data exchang

34、e 12 4.6 Voltage or active power regulation 12 4.7 Use of curves 13 4.7.1 General . 13 4.7.2 Generating unit reactive power limits . 13 4.8 Definition of schedules 13 5 CIM Static Transmission Network Model Profiles . 13 5.1 CIM Static Transmission Network Model Profiles General . 13 5.2 Core Equipm

35、ent Profile . 14 5.2.1 Concrete Classes 14 5.2.2 Abstract Classes 66 5.2.3 Enumerations 83 5.2.4 Datatypes 88 5.3 Operation Profile . 92 5.3.1 Concrete Classes 92 5.3.2 Abstract Classes 113 5.3.3 Enumerations 122 5.3.4 Datatypes 125 5.4 Short Circuit Profile . 126 5.4.1 Concrete Classes 126 5.4.2 Ab

36、stract Classes 148 5.4.3 Enumerations 154 5.4.4 Datatypes 154 6 Amplifications and conventions 157 6.1 Overview. 157 6.2 XML file validity 157 6.3 Normative string tables . 157 6.4 Roles and multiplicity 158 Annex A (informative) Model exchange use cases . 159 A.1 General . 159 A.2 Regional security

37、 coordinators operating as peers 159 A.3 Hierarchical modeling . 161 Annex B (informative) Modeling authorities 164 B.1 General . 164 2 IEC 61970-452:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 8 3 Terms and definitions 8 4 Overview of data requirements 8 4.

38、1 Overview. 8 4.2 General requirements . 9 4.3 Transformer modeling . 9 4.4 Modeling authorities 11 4.5 Use of measurement classes 11 4.5.1 General . 11 4.5.2 ICCP data exchange 12 4.6 Voltage or active power regulation 12 4.7 Use of curves 13 4.7.1 General . 13 4.7.2 Generating unit reactive power

39、limits . 13 4.8 Definition of schedules 13 5 CIM Static Transmission Network Model Profiles . 13 5.1 CIM Static Transmission Network Model Profiles General . 13 5.2 Core Equipment Profile . 14 5.2.1 Concrete Classes 14 5.2.2 Abstract Classes 66 5.2.3 Enumerations 83 5.2.4 Datatypes 88 5.3 Operation

40、Profile . 92 5.3.1 Concrete Classes 92 5.3.2 Abstract Classes 113 5.3.3 Enumerations 122 5.3.4 Datatypes 125 5.4 Short Circuit Profile . 126 5.4.1 Concrete Classes 126 5.4.2 Abstract Classes 148 5.4.3 Enumerations 154 5.4.4 Datatypes 154 6 Amplifications and conventions 157 6.1 Overview. 157 6.2 XML

41、 file validity 157 6.3 Normative string tables . 157 6.4 Roles and multiplicity 158 Annex A (informative) Model exchange use cases . 159 A.1 General . 159 A.2 Regional security coordinators operating as peers 159 A.3 Hierarchical modeling . 161 Annex B (informative) Modeling authorities 164 B.1 Gene

42、ral . 164 BS EN 61970452:2017IEC 61970-452:2017 IEC 2017 3 B.2 The ModelingAuthority Class and ModelingAuthoritySets 164 B.3 Full Model Exchange. 164 B.4 Benefits of this approach 164 B.4.1 Generality 164 B.4.2 Naming any IEC National Committee interested in the subject dealt with may participate in

43、 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the

44、two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have

45、the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misint

46、erpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nationa

47、l or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services car

48、ried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Co

49、mmittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of th