EN 61850-7-2-2010 en Communication networks and systems for power utility automation - Part 7-2 Basic information and communication structure - Abstract communication service inter.pdf

《EN 61850-7-2-2010 en Communication networks and systems for power utility automation - Part 7-2 Basic information and communication structure - Abstract communication service inter.pdf》由会员分享，可在线阅读，更多相关《EN 61850-7-2-2010 en Communication networks and systems for power utility automation - Part 7-2 Basic information and communication structure - Abstract communication service inter.pdf（220页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationCommunication networks and systems for power utility automationPart 7-2: Basic information and communication structure Abstract communication service interface (ACSI)BS EN 61850-

2、7-2:2010National forewordThis British Standard is the UK implementation of EN 61850-7-2:2010. It isidentical to IEC 61850-7-2:2010. It supersedes BS EN 61850-7-2:2003, whichis withdrawn.The UK participation in its preparation was entrusted to Technical CommitteePEL/57, Power systems management and a

3、ssociated information exchange. A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 52972 6

4、ICS 33.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2011.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6

5、1850-7-2:2010EUROPEAN STANDARD EN 61850-7-2 NORME EUROPENNE EUROPISCHE NORM October 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brus

6、sels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61850-7-2:2010 E ICS 33.200 Supersedes EN 61850-7-2:2003English version Communication networks and systems for power utility automation - Part 7-2: Basic information and co

7、mmunication structure - Abstract communication service interface (ACSI) (IEC 61850-7-2:2010) Rseaux de communication pour lautomatisation des systmes des compagnies dlectricit - Partie 7-2: Principes des structures dinformations et de communication - Interface de services abstraits de communication

8、(ACSI) (CEI 61850-7-2:2010) Kommunikationsnetze und -systeme fr die Automatisierung in der elektrischen Energieversorgung - Teil 7-2: Grundlegende Informations- und Kommunikationsstruktur - Abstrakte Schnittstelle fr Kommunikationsdienste (ACSI) (IEC 61850-7-2:2010) This European Standard was approv

9、ed by CENELEC on 2010-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation

10、al standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language

11、and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

12、 Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61850-7-2:2010EN 61850-7-2:2010 Foreword The text of document 57/1065/FDIS, future edition 2 of IEC 61850-7-2, prepared by IEC TC 57

13、, Power systems management and associated information exchange, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61850-7-2 on 2010-10-01. This European Standard supersedes EN 61850-7-2:2003. The major technical changes with regard to EN 61850-7-2:2003 are as follows:

14、class diagrams have been updated; data types not required have been removed; errors and typos haven been corrected; substitution model has been moved to EN 61850-7-3; service tracking for control blocks have been added; the view concept will be according to the new work on role bases access (RBA); s

15、ecurity issues are solved by the IEC 62351 series; and several terms have been harmonized with those in the other parts. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this document, the following print types are used: bold is used to highlight defined terms;

16、 Tahoma is used where the difference between a capital i (I) and a small L (l) is important to see. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such pate

17、nt rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-10-01

18、 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61850-7-2:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IE

19、C 61400-25-2 NOTE Harmonized as EN 61400-25-2. IEC 61850-8 series NOTE Harmonized in EN 61850-8 series (not modified). IEC 61850-9 series NOTE Harmonized in EN 61850-9 series (not modified). BS EN 61850-7-2:2010EN 61850-7-2:2010 IEC 61850-9-1 NOTE Harmonized as EN 61850-9-1. _ BS EN 61850-7-2:2010EN

20、 61850-7-2:2010 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referenc

21、es, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC/TS 61850-2 - Communication networks and system

22、s in substations - Part 2: Glossary - - IEC 61850-5 - Communication networks and systems in substations - Part 5: Communication requirements for functions and device models EN 61850-5 - IEC 61850-6 - Communication networks and systems for power utility automation - Part 6: Configuration description

23、language for communication in electrical substations related to IEDs EN 61850-6 - IEC 61850-7-1 - Communication networks and systems in substations - Part 7-1: Basic communication structure for substation and feeder equipment - Principles and models EN 61850-7-1 - IEC 61850-7-3 - Communication netwo

24、rks and systems in substations - Part 7-3: Basic communication structure for substation and feeder equipment - Common data classes EN 61850-7-3 - IEC 61850-7-4 - Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classe

25、s and data object classes EN 61850-7-4 - IEC 61850-8-1 - Communication networks and systems in substations - Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 EN 61850-8-1 - IEC 61850-9-2 - Communication networks and systems i

26、n substations - Part 9-2: Specific Communication Service Mapping (SCSM) - Sampled values over ISO/IEC 8802-3 EN 61850-9-2 - BS EN 61850-7-2:2010EN 61850-7-2:2010 Publication Year Title EN/HD Year ISO 4217 - Codes for the representation of currencies and funds - - ISO 9506-1 - Industrial automation s

27、ystems - Manufacturing Message Specification - Part 1: Service definition - - IEEE 754 - Binary floating-point arithmetic - - BS EN 61850-7-2:201061850-7-2 IEC:2010(E) CONTENTS INTRODUCTION.11 1 Scope.12 2 Normative references12 3 Terms and definitions .13 4 Abbreviated terms.14 5 ACSI overview and

28、basic concepts15 5.1 Conceptual model of IEC 61850.15 5.2 The meta-meta model16 5.3 The meta model.16 5.3.1 General .16 5.3.2 Information modelling classes 17 5.3.3 Information exchange modelling classes 18 5.3.4 Relations between classes .20 5.4 The domain type model21 5.5 The data instance model21

29、 6 TypeDefinitions.22 6.1 General .22 6.1.1 BasicTypes 22 6.1.2 CommonACSITypes.23 7 GenServerClass model .29 7.1 GenServerClass definition .29 7.1.1 GenServerClass syntax29 7.1.2 GenServerClass attributes .30 7.2 Server class services.30 7.2.1 Overview of directory and GetDefinition services 30 7.2

30、.2 GetServerDirectory 31 8 Application association model .32 8.1 Introduction .32 8.2 Concept of application associations .32 8.3 TWO-PARTY-APPLICATION-ASSOCIATION (TPAA) class model32 8.3.1 TWO-PARTY-APPLICATION-ASSOCIATION (TPAA) class definition .32 8.3.2 Two-party application association service

31、s . 34 8.4 MULTICAST-APPLICATION-ASSOCIATION (MCAA) class 37 8.4.1 MULTICAST-APPLICATION-ASSOCIATION (MCAA) class definition 37 8.4.2 MULTICAST-Application-association (MCAA) class attributes.37 9 GenLogicalDeviceClass model 38 9.1 GenLogicalDeviceClass definition 38 9.1.1 GenLogicalDeviceClass synt

32、ax 38 9.1.2 GenLogicalDeviceClass attributes 38 9.2 GenLogicalDeviceClass services38 9.2.1 GetLogicalDeviceDirectory .38 10 GenLogicalNodeClass model 39 10.1 GenLogicalNodeClass definition.39 10.1.1 GenLogicalNodeClass diagram 39 10.1.2 GenLogicalNodeClass syntax.40 BS EN 61850-7-2:201061850-7-2 IEC

33、:2010(E) 10.1.3 GenLogicalNodeClass attributes 41 10.2 GenLogicalNodeClass services42 10.2.1 Overview .42 10.2.2 GetLogicalNodeDirectory .42 10.2.3 GetAllDataValues.43 11 Generic data object class model .45 11.1 GenDataObjectClass diagram 45 11.2 GenDataObjectClass syntax 45 11.3 GenDataObjectClass

34、attributes 46 11.3.1 DataObjectName .46 11.3.2 DataObjectRef data object reference.46 11.3.3 m/o/c .46 11.3.4 DataObjectType .46 11.4 GenDataObjectClass services46 11.4.1 General definitions and overview46 11.4.2 GetDataValues 47 11.4.3 SetDataValues.48 11.4.4 GetDataDirectory .49 11.4.5 GetDataDefi

35、nition 50 12 Generic common data class model50 12.1 General .50 12.2 GenCommonDataClass .51 12.2.1 GenCommonDataClass diagram 51 12.2.2 GenCommonDataClass syntax.51 12.2.3 GenCommonDataClass attributes 52 12.3 GenDataAttributeClass 52 12.3.1 GenDataAttributeClass diagram .52 12.3.2 GenDataAttributeC

36、lass syntax53 12.3.3 GenDataAttributeClass attributes .53 12.4 GenConstructedAttributeClass .57 12.4.1 GenConstructedAttributeClass diagram 57 12.4.2 GenConstructedAttributeClass syntax 57 12.4.3 GenConstructedAttributeClass attributes .57 12.5 GenSubDataAttributeClass 57 12.5.1 SubDataAttributeClas

37、s diagram .57 12.5.2 SubDataAttributeClass syntax 58 12.5.3 GenSubDataAttributeClass attributes .58 12.6 Referencing data objects and their components .58 12.6.1 General .58 12.6.2 Reference syntax .59 12.6.3 Base types and their relation 59 12.6.4 Example of using references 60 13 DATA-SET class mo

38、del 61 13.1 General .61 13.2 DATA-SET class definition.62 13.2.1 DATA-SET class syntax .62 13.2.2 DATA-SET class attributes.63 13.3 DATA-SET class services 63 13.3.1 Overview .63 BS EN 61850-7-2:201061850-7-2 IEC:2010(E) 13.3.2 GetDataSetValues .64 13.3.3 SetDataSetValues65 13.3.4 CreateDataSet .66

39、13.3.5 DeleteDataSet .66 13.3.6 GetDataSetDirectory 67 14 Service tracking 68 14.1 General .68 14.2 Common service tracking (CST) 68 15 Modelling of control block classes .70 15.1 General .70 15.2 Control block class models 70 15.2.1 Control block attributes 71 15.2.2 Control block services71 15.2.3

40、 Attribute type .71 15.3 Control block tracking services 71 15.3.1 General .71 15.3.2 Common data classes for control block service tracking .72 16 SETTING-GROUP-CONTROL-BLOCK class model.82 16.1 General .82 16.2 SGCB class definition 83 16.2.1 SGCB class syntax 83 16.2.2 SGCB class attributes 84 16

41、.3 SGCB class services .85 16.3.1 Overview .85 16.3.2 SelectActiveSG85 16.3.3 SelectEditSG .86 16.3.4 SetEditSGValue .87 16.3.5 ConfirmEditSGValues 88 16.3.6 GetEditSGValue.89 16.3.7 GetSGCBValues 90 17 REPORT-CONTROL-BLOCK and LOG-CONTROL-BLOCK class models 91 17.1 Overview .91 17.2 REPORT-CONTROL-

42、BLOCK class model93 17.2.1 Basic concepts 93 17.2.2 BUFFERED-REPORT-CONTROL-BLOCK (BRCB) class definition .93 17.2.3 BRCB class services 103 17.2.4 UNBUFFERED-REPORT-CONTROL-BLOCK (URCB) class definition 116 17.2.5 URCB class services . 117 17.3 LOG-CONTROL-BLOCK class model. 118 17.3.1 General . 11

43、8 17.3.2 LCB class definition . 119 17.3.3 LOG class definition. 124 17.3.4 Reason code for log entries . 127 17.3.5 LOG services. 127 18 Generic substation event class model (GSE). 131 18.1 Overview . 131 18.2 GOOSE-CONTROL-BLOCK (GoCB) class . 132 18.2.1 GoCB definition . 132 18.2.2 GOOSE service

44、definitions. 134 BS EN 61850-7-2:201061850-7-2 IEC:2010(E) 18.2.3 Generic object oriented substation event (GOOSE) message . 139 19 Transmission of sampled value class model 140 19.1 Overview . 140 19.2 Transmission of sampled values using multicast 142 19.2.1 MSVCB class definition 142 19.2.2 Multi

45、cast sampled value class services 144 19.3 Transmission of sampled values using unicast . 147 19.3.1 USVCB class definition 147 19.3.2 Unicast sampled value services . 150 19.4 Sampled value format 153 19.4.1 MsvID or UsvID . 154 19.4.2 OptFlds . 154 19.4.3 DatSet. 154 19.4.4 Sample 1n . 155 19.4.5

46、SmpCnt . 155 19.4.6 RefrTm 155 19.4.7 ConfRev 155 19.4.8 SmpSynch . 155 19.4.9 SmpRate . 155 19.4.10 SmpMod 155 19.4.11 Simulation . 155 20 CONTROL class model. 156 20.1 Introduction . 156 20.2 Control with normal security. 158 20.2.1 Direct control with normal security 158 20.2.2 SBO control with n

47、ormal security 160 20.3 Control with enhanced security 162 20.3.1 Introduction . 162 20.3.2 Direct control with enhanced security . 162 20.3.3 SBO control with enhanced security . 163 20.4 Time-activated operate 166 20.5 CONTROL class service definitions . 167 20.5.1 Overview . 167 20.5.2 Service pa

48、rameter definition. 168 20.5.3 Service specification 172 20.6 Tracking of control services . 178 20.6.1 General . 178 20.6.2 Control service tracking (CTS) . 178 21 Time and time-synchronization model . 179 21.1 General . 179 21.2 External information. 180 22 Naming conventions . 181 22.1 Class nami

49、ng and class specializations 181 22.2 Referencing an instance of a class. 182 22.3 Scope 183 23 File transfer model 184 23.1 File class . 184 23.1.1 FileName . 184 23.1.2 FileSize . 184 BS EN 61850-7-2:201061850-7-2 IEC:2010(E) 23.1.3 LastModified 184 23.2 File services 185 23.2.1 GetFile 185 23.2.2 SetFile. 185 23.2.3 DeleteFile 186 23.2.4 GetFileAttributeValues . 186 Annex A (normative) ACSI conformance statement. 188 Annex B (normative) Formal definition of IEC 61850-7-2 Common Data Classes. 195 Ann