EN 61754-32-2016 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32 Type DiaLink connector family.pdf

《EN 61754-32-2016 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32 Type DiaLink connector family.pdf》由会员分享，可在线阅读，更多相关《EN 61754-32-2016 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32 Type DiaLink connector family.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、Fibre optic interconnecting devices and passive components Fibre optic connector interfacesPart 32: Type DiaLink connector familyBS EN 61754-32:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 6

2、1754-32:2016. It isidentical to IEC 61754-32:2016.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this committee can be obtaine

3、d onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 87582 3ICS 33.180.20Compliance with a B

4、ritish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61754-32:2016EUROPEAN STANDARD N

5、ORME EUROPENNE EUROPISCHE NORM EN 61754-32 December 2016 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family (IEC 61754-32:2016) Dispositifs dinterconnexion et composants passifs fibroniq

6、ues - Interfaces de connecteurs fibroniques - Partie 32: Famille de connecteurs de type DiaLink (IEC 61754-32:2016) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 32: Steckverbinderfamilie der Bauart DiaLink (IEC 61754-32:20

7、16) This European Standard was approved by CENELEC on 2016-10-31. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi

8、cal references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi

9、lity of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, F

10、ormer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotech

11、nical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No

12、. EN 61754-32:2016 E BS EN 61754-32:2016EN 61754-32:2016 2 European foreword The text of document 86B/4005/FDIS, future edition 1 of IEC 61754-32, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vot

13、e and approved by CENELEC as EN 61754-32:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-07-31 latest date by which the national standards conflicting with the

14、 document have to be withdrawn (dow) 2019-10-31 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the Int

15、ernational Standard IEC 61754-32:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60794-2-50 NOTE Harmonized as EN 60794-2-50. IEC 61755 NOTE Harmonized in EN

16、 61755 series. ISO 8015:2011 NOTE Harmonized as EN ISO 8015:2011 (not modified). BS EN 61754-32:2016 2 IEC 61754-32:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Description 6 4 Interfaces 6 (informative) Outline and maximum dimensions 13 Annex A(informat

17、ive) Protection cap dimensions . 15 Annex B(informative) Version of the plug connector interface without sleeve 16 Annex CBibliography . 17 Figure 1 Fixed ferrule interface (plug connector) view with sleeve . 7 Figure 2 Fixed ferrule interface (plug connector) view without sleeve 8 Figure 3 APC end

18、face geometry 8 Figure 4 PC end face geometry 8 Figure 5 Pin gauge for a fixed ferrule interface (plug connector) with sleeve 10 Figure 6 Spring-loaded ferrule interface (socket connector) 11 Figure A.1 Outline and maximum dimensions (version with a locking mechanism) . 13 Figure A.2 Fixed ferrule i

19、nterface (plug connector) 13 Figure A.3 Spring-loaded ferrule interface (socket connector) . 14 Figure B.1 Fixed ferrule interface with a pulling rope protection cap 15 Figure C.1 Plug connector interface without sleeve . 16 Table 1 Intermateability between plug connectors . 7 Table 2 Dimensions of

20、a fixed ferrule interface (plug connector) 9 Table 3 Ferrule grade table for a connector interface 10 Table 4 Pin gauge dimensions 10 Table 5 Dimensions of a spring-loaded ferrule interface (socket connector) . 12 Table A.1 Outline and maximum dimensions . 14 Table B.1 Dimensions of a fixed ferrule

21、interface with a pulling rope protection cap . 15 BS EN 61754-32:2016IEC 61754-32:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 32: Type DiaLink connector family FOREWORD 1) The Internation

22、al Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic

23、fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any

24、 IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardi

25、zation (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repres

26、entation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC

27、cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publica

28、tions. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas,

29、 access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including

30、 individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance

31、upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 61754-32 has been prepared by subcomm

32、ittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86B/4005/FDIS 86B/4021/RVD Full information on the voting for the approval of this standard can be

33、found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 61754-32:2016 4 IEC 61754-32:2016 IEC 2016 A list of all the parts in the IEC 61754 series, published under the general title Fibre optic interconnec

34、ting devices and passive components Fibre-optic connector interfaces, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the

35、specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61754-32:2016IEC 61754-32:2016 IEC 2016 5 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that complian

36、ce with this document may involve the use of a patent concerning IEC 61754-32. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminat

37、ory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: DIAMOND SA Via dei Patrizi 5 6616 Losone Switzerland Attention is drawn to the possibility that some of the eleme

38、nts of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/www.iec.ch/tctools/patent_decl.htm) maintain online data bases of patents relevant to

39、their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. BS EN 61754-32:2016 6 IEC 61754-32:2016 IEC 2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 32: Type DiaLink connector family

40、1 Scope This part of IEC 61754 defines the standard interface dimensions for the type DiaLink family of connectors. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated referenc

41、es, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. There are no normative references in this document. 3 Description The parent connector for the type DiaLink connector family is a simplex connector which is c

42、haracterized by a 1,25 mm nominal ferrule diameter. It includes a push-pull coupling mechanism, which is spring-loaded relative to the ferrule in the direction of the optical axis. To provide adequate contact force, one of the parts containing the ferrule is spring-loaded. The other part contains a

43、fixed ferrule. The optical alignment mechanism of the connectors is a resilient sleeve style and is attached directly to the fixed ferrule interface. Drawings and dimensions provided consist of those minimum features that are functionally critical during the mating and unmating sequences of counterp

44、art components. 4 Interfaces This document defines the standard interfaces for the type DiaLink connector family. This document contains the following standard interfaces: IEC 61754-32-1 Fixed ferrule plug connector PC-interface (plug connector) IEC 61754-32-2 Spring-loaded ferrule plug connector PC

45、-interface (socket connector) IEC 61754-32-3 Fixed ferrule plug connector interface APC 8 (plug connector) IEC 61754-32-4 Spring-loaded ferrule plug connector interface APC 8 (socket connector) The document interfaces given in Table 1 are intermateable. BS EN 61754-32:2016IEC 61754-32:2016 IEC 2016

46、7 Table 1 Intermateability between plug connectors Plug interfaces IEC 61754-32-1 IEC61754-32-2 IEC61754-32-3 IEC61754-32-4 IEC 61754-32-1 - Mate Not mate Not mate IEC 61754-32-2 Mate - Not mate Not mate IEC 61754-32-3 Not mate Not mate - Mate IEC 61754-32-4 Not mate Not mate Mate - Figures 1 and 2

47、show a fixed ferrule interface for the plug connector with and without sleeve, respectively. Figures 3 and 4 show APC and PC end face geometry, respectively. Table 2 gives dimensions of a fixed ferrule interface for the plug connector. Table 3 shows ferrule grades for connector interfaces. Figure 5

48、shows a pin gauge for a fixed ferrule interface for a plug connector with sleeve and Table 4 gives pin gauge dimensions. Figure 1 Fixed ferrule interface (plug connector) view with sleeve IEC D E C B O N KMASOther design allowed MECHANICAL REFERENCE PLANE View with sleeve MECHANICAL REFERENCE PLANE

49、L F G H U JRPOPTICAL REFERENCE PLANE BS EN 61754-32:2016 8 IEC 61754-32:2016 IEC 2016 Figure 2 Fixed ferrule interface (plug connector) view without sleeve Figure 3 APC end face geometry Figure 4 PC end face geometry IEC T SOPTICAL REFERENCE PLANE MECHANICAL REFERENCE PLANE AView without sleeve Plane A Body EA Plane B Ferrule EB IEC No sharp edge A BG BI BHIEC No sharp edge A BG BI BHBS EN 61754-32:2016IEC 61754-32:2016 IEC 2016 9 Table