EN 61603-1-1997 en Transmission of Audio and or Video and Related Signals Using Infra-Red Radiation Part 1 General《使用红外辐射的音频和 或视频及相关信号的传输系统 第1部分 总则 替代HD 455 S1 1985 IEC 61603-1 199.pdf

《EN 61603-1-1997 en Transmission of Audio and or Video and Related Signals Using Infra-Red Radiation Part 1 General《使用红外辐射的音频和 或视频及相关信号的传输系统 第1部分 总则 替代HD 455 S1 1985 IEC 61603-1 199.pdf》由会员分享，可在线阅读，更多相关《EN 61603-1-1997 en Transmission of Audio and or Video and Related Signals Using Infra-Red Radiation Part 1 General《使用红外辐射的音频和 或视频及相关信号的传输系统 第1部分 总则 替代HD 455 S1 1985 IEC 61603-1 199.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、STD-BSI BS EN bLb03-1-ENGL 1797 = Lb24bb7 Ob577Lb O90 BRITISH STANDARD Tkansmission of audio and/or video and related signals using infra-red radiation Part 1. General The European Standard EN 616031 : 1997 has the status of a British Standard ICs 33.160.99 BS EN 61603-1 : 1997 EC 61603-1 1997 -o I-

2、.= U- NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHI LAW This British Standard, having been prepared under the direction of the Eiectrotechnicai Sector Board, was pubiishe under the authority of the Standards Board and comes inta effect on 15 September 1997 O BSI 1997 ISBN O 080

3、27761 6 National foreword This British Standard is the English language version of EN 6160S1: 1997. It is identicai with IEC 6160S1: 1997 including corrigendum May 1997. It supemedes BS 6418 : 1983 which will be withdrawn on 1997-12-01. “he UK participation in its preparation was entrusted by Techni

4、cal Committee EPU100, Audio, video and multimedia systems and equipment, to Subcommittee EPUlB, Equipment and systems in the field of audio, video and audiovisual engineering, which has the responsibility to: - aid enquirem to understand the te* - present to the responsible intedonaVEuropean committ

5、ee any enquiries on the intmpretation, or proposais for change, and keep the UK interests informed, - monitor related intedonal and European developments and promulgate them in the UK. This standard should be read in coqjunction with BS 7693 : 1993 Guide to uses of infra-red tsansmiss ion and the pr

6、evention or contxol of intererence between systems. BS EN 61603 will consist of six parts: Partl: General Part2: 7kammml * on systms for audio wideband and related signais Part3 ?f.ansmissi on systems for audio signals for conference and similar applications Part4 IlransmiSsi on systems for low-spee

7、d remote control Part5 lluwNm on systems for highqeed dab. and remote control Part6 Ik.ansmiss ion systems for video and audiovisual signah of high quality A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, ali IEC publications

8、have the number 60000 aded to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, pubiications may contain idenam from both systems. Cross-references Attention is drawn to the fact that CEN and

9、 CENELEC Standards normay include an annex which lists normative references to international publications with their corresponding European pubiications. The British Standards which implement these international or European pubiidons may be found in the BSI standards Catalogue under the section enti

10、tled Internationai standards Correspondence Index, or using the fi8 facity of the BSI Standards Electsonic Catalogue. Compliance with a British Standard does not of itself confer immunity from legai obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ti

11、tie page, pages 2 to 27, a blank page, an inside back cover and a back cover. Amendments issued since publication I Date Amd No. STD-BSI Bs EN bLb03-2-ENGL 2797 LbZqbbq Ob57714 7b3 m EUROPEAN STANDARD EN 61603-1 NORME EUROPEENNE EUROPISCHE NORM May 1997 ICs 33.160.99 Supandes HD 4SS S1: 1985 Descrip

12、tors: Sound transmission, electroacoustic equipment, infrared rsdiation, gsnerd, measurements, characteristics, performince evehation, clasricstions, marking English version Transmission of audio and/or video and related signals using inf ra-red radiation Part 1: General (IEC 61 603-1 :1997 + corrig

13、endum 1997) Transmission de signaux audio et/ou vido et de signaux similaires au moyen du rayonnement infrarouge mit Infrarot-Strahlung Partie 1 : Gnralits bertragung von Ton- und/oder Bildsignalen und verwandten Signalen Teil 1 : Allgemeines (CE1 61 603-1 :I 997 + (IEC 61603-1 :1997 + - - corrigend

14、um 1997) _. Corrigendum 1997) * * v) This European Standard was approved by CENELEC on 1997-03-1 1, CENELEC members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

15、 Up-todate lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENuH= member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

16、n under the responsibility of a CENELH= member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland. It

17、aly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotschnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Centrai Secretariat: NO de Stassart 35, B -

18、1050 Brussels * 1997 CENELEC - Ali rights of exploitation in my form and by my meana roaawd worldwide for CENELEC members. Ref. NO, EN 61603-11997 E STD-BSI BS EN bLb03-1-ENGL 1997 LbZqbbS Ob57719 BTT 9 Page 2 EN 61603-1 : 1997 Foreword The text of document 1 OOC/31 /FDIS, future edition 1 of IEC 61

19、 603-1, prepared by SC 1 OOC, Audio, video and multimedia subsystems and equipment, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61 603-1 on 1997-03-1 1. This European Standard supersedes HD 455 Si

20、: 1985. This standard is to be used in conjunction with ENV 50185-1:1995. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1 997-1 2-0 1 - latest date by which the national s

21、tandards conflicting with the EN have to be withdrawn (daw) 1997-1 2-01 Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annex A is informative. Annex ZA has been added by

22、 CENELEC. Endowment notice The text of the International Standard IEC 61 603-1 : 1997 and its corrigendum May 1997 was approved by CENELEC as a European Standard without any modification. STD-BSI BS EN bLb03-1-ENGL 1777 m 1bZqbbS Ob57720 511 m Page 3 EN 61603-1 : 1997 CONTENTS Page 5 INTRODUCTION SE

23、CTION 1 : GENERAL Clause 1.1 1.2 1.3 1.4 2.1 2.2 2.3 - 2.4 2.5 2.6 = = - . = II _. 2.7 2.8 * * m 3.1 3.2 3.3 3.4 Scope . 6 Normative references . 6 Definitions 7 Abbreviations 7 SECTION 2: EXPLANATION OF TERMS AND GENERAL INFORMATION General Operating environment . IR sour IR propagation medium and

24、receiver . Modulation IR interference Electromagnetic compatibility . Safety aspects SECTION 3: GENERAL CONDITIONS FOR MEASUREMENTS 8 8 8 9 10 12 12 12 Operating environment and measurement conditions . 13 Pre-conditioning . 13 Interface (matching) values 13 Presentation of results in specifications

25、 . 13 SECTION 4: CHARACTERISTICS TO BE SPECIFIED AND THEIR METHODS OF MEASUREMENT . 4.1 Characteristics of IR sources 13 4.2 Characteristics of the IR propagation medium and receiver 15 4.3 Characteristics of modulation . 17 SECTION 5: PERFORMANCE REQUIREMENTS AND RECOMMENDATIONS 5.1 Maximum power d

26、ensity of the irradiation 18 5.2 Spurious IR emission . 18 5.3 Polarity . 18 5.4 Electrical interfaces 18 5.5 Spurious modulation signals 18 5.6 IR emissions from other devices and equipment . 18 O BSI 1997 STDDBSI BS EN bLb03-1-ENGL 1777 Lb2qbbS Ob57721 458 U Page 4 EN 61603-1 : 1997 Page SECTION 6

27、: CLASSIFICATION OR SYSTEMS AND EQUIPMENT Clause 6.1 General 19 6.2 Classification criteria and coding 19 SECTION 7: MARKING AND CONTENTS OF SPECIFICATIONS 7.1 Marking 19 7.2 Contents of specifications 19 Tables 1 Interference between IR sources and systems 20 2 Channel allocation scheme 21 3 Markin

28、g and contents of specifications 23 Figures 1 Signal chain and related IEC standards . 19 2 Presentation of channel grids . 21 3 Preferred electrical spectrum allocation for IR modulation, and the relevant parts of this standard . 22 Annex A - Details of the applications of parts 2 to 6 of IEC 1603

29、. . 24 Annex ZA (normative) Normative references to internationai publications with their corresponding European publications . 26 Q BSI 1997 STD.BS1 BS EN bLb03-1-EGL 1997 fi Lb2qbbS b57722 374 Page 6 EN 61603-1 : 1997 INTRODUCTION This part of IEC 1603 covers the transmission of audio, video, data

30、 and control signals which use free radiation of infra-red (IR). Transmission using infra-red radiation is in growing use for many different applications. This standard gives guidance for the generic usage of infra-red. It provides information for designers and users of infra-red systems which allow

31、 the evaluation of the operation of different systems. IEC 764 specifies requirements for audio transmission with high quality audio transfer via two infra-red channels and for conference systems with up to nine audio channels and using frequency modulation on subcarrierc which amplitude modulate th

32、e IR intensity. However, this number of channels sets limits on technical evolution. The growing use of IR transmission, such as for remote control or data transmission, and the increasing number of cases, where modulated IR is emitted as a side-effect, reveals the need for a more general concept. I

33、nfra-red systems typically use radiation in the range of wavelengths from 830 nm to 950 nm. To take into account possible future development, this standard covers wavelengths from 700 nm to 1600 nm. A direct modulation of the frequency of the infra-red radiation is possible, but is not yet used for

34、transmission through air. It should not be excluded in the long term. - I The prevention of interference between different applications by the use of different - wavelengths is not yet economically feasible, but the situation may soon change; therefore this = possibility is allowed for in this stand

35、ard. - I - * v, * Most of the applications in the complete standard (six parts) already exist as wired systems. In extending to wireless links using infra-red, the aim is to retain the transmission properties of I the wired versions. This standard is therefore as consistent as possible with existing

36、 standards for wired systems. This standard gives guidance only on avoiding interference from light sources. For a fully compatible system, it is necessary to set limits both for the emission from light sources and for the immunity of the infra-red transmission systems. For ease of reference, the ap

37、plications covered in the different parts of this standard are explained in more detail in annex A. STD=BSI BS EN blb03-l-ENGL 1997 Lb29bbS Ob57723 220 Page 6 EN 61603-1 : 1997 TRANSMISSION OF AUDIO AND/OR VIDEO AND RELATED SIGNALS USING INFRA-RED RADIATION - Part 1: General Section 1: General 1.1 S

38、cope This part of IEC 1603 gives methods of measuring and specifying the common technicai features of the parts of systems which use diffusely radiated or wide beams of infra-red radiation as carriers of information, mainly representing audio and/or video signals but also control data related to aud

39、io and video apparatus. This standard applies to signal transmission by use of freely radiated infra-red, normally used indoors in rooms and for groups of varying sizes. It does not cover security systems or other industrial applications, such as measurement and automation equipment. It also does no

40、t cover traffic systems or systems for the help of handicapped people. Narrow-beam and cable-like infra-red applications are excluded, although the former could interfere with the systems covered. 1.2 Normative references The following normative documents contain provisions which, through reference

41、in this text, constitute provisions of this part of IEC 1603. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 1603 are encouraged to investigate the possibility of applying the most re

42、cent editions of the normative documents indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IEC 50(845): 1987, International Electrotechnical Vocabulary - Lighting IEC 65: 1985, Safety requirements for mains operated electronic and related apparatu

43、s for household and similar general use IEC 68: Environmental testing IEC 268-1 : 1985, S0un.d system equipment - Part 1: General IEC 268-15: 1996, Sound system equipment - Part 15: Preferred matching values for the interconnection of sound system components IEC 417: Graphical symbols for use on equ

44、ipment IEC 574-3: 1983, Audiovisual, video and television equipment and systems - Part 3: Connectors for the interconnection of equipment in audiovisual systems IEC 574-4: 1982, Audiovisual, video and television equipment and systems - Part 4: Preferred matching values for the interconnection of equ

45、ipment in a system IEC 825-1: 1993, Safety of laser products - Part 1: Equipment classification, requirements and users guide IEC 1147: 1993, Uses of infra-red transmission and the prevention or control of interference between systems IS0 7000: 1989, Graphical symbols for use on equipment - Index an

46、d synopsis STD-BSI BS EN bLb03-2-ENGL 1997 Lb24bb9 Ob57724 Lb7 D Page 7 EN 61603-1 : 1997 1.3 Definitions For the purpose of this part of IEC 1603, the following definitions apply. 1.3.1 channel identification number: In a multichannel system, the number given to a specific single channel for identi

47、fication purposes. 1.3.2 detector; IR detector: Front end of an IR receiver, such as photodiode, phototransistor. 1.3.3 number of channels: The total number of information channels offered by a system, as specified by the manufacturer. 1.3.4 power density 1) In general, the quotient of the IR power

48、and a specified unit area. 2) For diffuse IR radiation in a room, the total installed IR power divided by the floor area of the room. NOTE - This special definition has proved to be helpful for planning purposes. 1.3.5 radiator; IR radiator: Device for converting the electrical input supplied by a s

49、eparate transmitter into IR. - II _I 1.3.6 receiver; IR receiver: Device with IR detector and signal processing which reconstructs the original message or transcodes it for special use, such as remote control. 1.3.7 source; IR source: Any device supplying IR for transmitting signals. 1.3.8 - = = = - * v, * transmitter; IR transmitter: Device containing an electronic circuitry which processes a message into a signal suitable for the modulation of an IR source in the same or in a separate unit. 1.3.9 Ulbricht sphere: Device, in the shape of a