EN 61076-4-115-2003 en Connectors for electronic equipment Part 4-115 Printed board connectors Backplane connector for InfiniBand equipment《电子设备用连接器 第4-115部分 印制板连接器 InfiniBand装置用背板.pdf

《EN 61076-4-115-2003 en Connectors for electronic equipment Part 4-115 Printed board connectors Backplane connector for InfiniBand equipment《电子设备用连接器 第4-115部分 印制板连接器 InfiniBand装置用背板.pdf》由会员分享，可在线阅读，更多相关《EN 61076-4-115-2003 en Connectors for electronic equipment Part 4-115 Printed board connectors Backplane connector for InfiniBand equipment《电子设备用连接器 第4-115部分 印制板连接器 InfiniBand装置用背板.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61076-4-115: 2003 Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment The European Standard EN 61076-4-115:2003 has the status of a British Standard ICS 31.220.10 BS EN 61076-4-115:2003 This British Standard was

2、 published under the authority of the Standards Policy and Strategy Committee on 2 October 2003 BSI 2 October 2003 ISBN 0 580 42666 1 National foreword This British Standard is the official English language version of EN 61076-4-115:2003. It is identical with IEC 61076-4-115:2003. The UK participati

3、on in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on reque

4、st to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI El

5、ectronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers t

6、o understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document c

7、omprises a front cover, an inside front cover, the EN title page, pages 2 to 68, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61076-

8、4-115 NORME EUROPENNE EUROPISCHE NORM August 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of e

9、xploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-4-115:2003 E ICS 31.220.10 English version Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003) Connecteurs pour

10、quipements lectroniques Partie 4-115: Connecteurs pour cartes imprimes Connecteur de fond de panier pour quipement InfiniBand (CEI 61076-4-115:2003) Steckverbinder fr elektronische Einrichtungen Teil 4-115: Steckverbinder fr gedruckte Schaltungen Rckplatten-Steckverbinder fr InfiniBand-Gerte (IEC 61

11、076-4-115:2003) This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

12、bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsi

13、bility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Irelan

14、d, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 48B/1288/FDIS, future edition 1 of IEC 61076-4-115, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical

15、structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-4-115 on 2003-05-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by

16、endorsement (dop) 2004-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-05-01 The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is claimed that compliance with this document may involve the use

17、of a patent concerning a) an electrical connector assembly for establishing electrical contact with contacting devices of external terminals, e.g. with solder points of a circuit board; b) an electrical connector assembly for establishing electrical contact with external terminals having contacting

18、devices with contact faces, e.g. with solder points of a circuit board; c) an electrical connector assembly with an electrical connector having a connecting position and contacting devices for establishing electrical contact between a first and a second printed circuit board. The IEC and CENELEC tak

19、e no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the sta

20、tement of the holder of this patent right is registered with the IEC. Information may be obtained from: Tyco Electronics Cororation PO Box 3608 Harrisburg, PA 17105-3608 USA Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other tha

21、n those identified above. IEC and CENELEC shall not be held responsible for identifying any or all such patent rights. Annexes designated “normative“ are part of the body of the standard. In this standard, annexes A, B and ZA are normative. Annex ZA has been added by CENELEC. _ Endorsement notice Th

22、e text of the International Standard IEC 61076-4-115:2003 was approved by CENELEC as a European Standard without any modification. _ Page2 EN610764115:2003-67016-4 5113002:CEI 3 CONTENTS 1General data.7 1.1Recommended method of mounting.7 1.2Ratings and characteristics8 1.3Normative references.9 1.4

23、Marking.10 1.5IEC type designation10 1.6Ordering information10 2Technical data11 2.1Definitions.11 2.2Survey of styles and variants12 2.3Information on application13 3Dimensional information17 3.1General.17 3.2Isometric view and common features18 3.3Mating information.21 3.4Fixed connector.24 3.5Plu

24、g-in card paddle25 3.6Mounting information for fixed connector27 3.7Mounting information for paddle-guard.28 3.8Gauges30 4Characteristics35 4.1Climatic category.35 4.2Electrical35 4.3Mechanical38 4.4High-speed characteristics.40 5Test schedule.43 5.1General.43 5.2Test schedule tables 50 Annex A (nor

25、mative) Test method for gauge supporting force. 62 A.1Object 62 A.2Preparation of the specimen. 62 A.3Test equipment 62 A.4Test method. 62 A.5Details to be specified 64 Annex B (normative) Test method for dust and fibre resistance. 65 B.1Object 65 B.2Preparation of the specimen. 65 B.3Test equipment

26、 65 B.4Test method. 66 Page3 EN610764115:2003 Annex ZA (normative) Normative references to international publications with their corresponding European publications 61076-4-115 IEC:2003 3 TNOCENTS 1 Greneatad la51. 1.1 Rcemomm dedneefo dohtm gnitnuo 51. 2.1 Rsgnitac dna rahcaretiscits 71 3.1 Nromavi

27、ter efercnese91. 4.1 raMkign 12. 5.1 yt CEIsed epnoitangi 12 6.1 Orredfni gniormnoita 12 2 Tcecinhaatad l 32 1.2 Dfesnoitini 32. 2.2 Sruyevfo s ytlserav dna istna52 3.2 fnIromacilppa no noitnoita 72 3 Dmisnefni lanoiormnoita53 1.3 Grenela 53. 2.3 sIomertciweiv c dna ommf norutaese73 3.3 fni gnitaMor

28、mnoita 34. 4.3 Fxic decennorot 94. 5.3 P-gulc niardelddap 15 6.3 fni gnitnuoMormf noitaorf ixc decennorot55 7.3 fni gnitnuoMormf noitaor-elddap raugd 75. 8.3 Gsegua16 4 Crahcaretiscits.17. 1.4 Cmilcitac arogety 17. 2.4 Ecelrtical17 3.4 ceMcinahal 77 4.4 H-hgisc deeprahcaretiscits18. 5 Tses tceludeh

29、.78 1.5 Grenela 78. 2.5 Tses tcselbat eludeh 101 xennA( A ronm)evitaT setm f dohteros eguag roppuf gnitroce .521 1.A Ojbcet 521 2.A Prrapefo noitas eht cepmine.521 3.A Tsempiuqe ttne 521 4.A Tsem tedoht.215 5.A Dsliates eb ot cepfidei 921 xennA( B ronm)evitaT sem tf dohterosud f dna tirbr eseiscnate

30、.131 1.B Ojbcet 131 2.B Prrapefo noitas eht cepmine.131 3.B Tsempiuqe ttne 131 4.BTsem tedoht.133 3egaP 3002:511467016NE xennA amron( AZtiv)e Nromtaiverefer ences ot etnirtaninoal buplacitoins wit hthrie rrocespidnong eporuEap nulbicatoins 61076-4-115 IEC:2003 3 TNOCENTS 1Genertad laa.7 .11Recomm de

31、dnemeo dohtf mnitnuog.7 .12Rgnitas dna cahracetrisitcs8 .13Normaitve referneces.9 .14aMrking.01 .15t CEIyed epsoitangin01 .16Oredrni gniformoitan01 2Tecinhcatad la11 .21Defnoitinis.11 .22Surevyo f stylesav dna ritnas21 .23nIformailppa no noitcoitan31 3Dimnesni lanoiformoitan71 .31General.71 .32Isome

32、triceiv w dna comm nofutaeres81 .33ni gnitaMformoitan.12 .34Fix decennocotr.42 .35Pgul- nicardlddap e52 .36ni gnitnuoMform noitafor fix decennocotr72 .37ni gnitnuoMform noitaforelddap -augrd.82 .38Geguas03 4Cahracetrisitcs53 .41Cilmitac caogetry.53 .42Eelctrical53 .43eMcinahcal83 .44Hhgi-s deepcahra

33、cetrisitcs.04 5Tes tcsludehe.34 .51General.34 .52Tes tcselbat eludehs 05 ennAx A (onrmevita) Test m dohtefor eguag soppur gnitforce. 26 .A1Object 26 .A2Prapero noitaf eht sepcimen. 26 .A3Tespiuqe tmnet 26 .A4Tes tmeohtd. 26 .A5Dliates eb ot sepcifeid 46 ennAx B (onrmevita) Tes tm dohteforud s dna tf

34、ibr eresisnatce. 56 .B1Object 56 .B2Prapero noitaf eht sepcimen. 56 .B3Tespiuqe tmnet 56 .B4Tes tmeohtd. 66 3egaP 3002:511467016NE xennA amron( AZtiv)e Nromtaiverefer ences ot etnirtaninoal buplacitoins wit hthrie rrocespidnong eporuEap nulbicatoins -67016-4 5113002:CEI 3 CONTENTS 1 General data.15

35、1.1 Recommended method of mounting .15 1.2 Ratings and characteristics 17 1.3 Normative references.19 1.4 Marking .21 1.5 IEC type designation 21 1.6 Ordering information 21 2 Technical data 23 2.1 Definitions .23 2.2 Survey of styles and variants25 2.3 Information on application 27 3 Dimensional in

36、formation35 3.1 General .35 3.2 Isometric view and common features37 3.3 Mating information .43 3.4 Fixed connector .49 3.5 Plug-in card paddle51 3.6 Mounting information for fixed connector55 3.7 Mounting information for paddle-guard .57 3.8 Gauges61 4 Characteristics71 4.1 Climatic category .71 4.

37、2 Electrical71 4.3 Mechanical 77 4.4 High-speed characteristics.81 5 Test schedule .87 5.1 General .87 5.2 Test schedule tables 101 Annex A (normative) Test method for gauge supporting force .125 A.1 Object 125 A.2 Preparation of the specimen.125 A.3 Test equipment 125 A.4 Test method.125 A.5 Detail

38、s to be specified 129 Annex B (normative) Test method for dust and fibre resistance.131 B.1 Object 131 B.2 Preparation of the specimen.131 B.3 Test equipment 131 .4BTse mtehodt.133 Page3 EN610764115:2003 Annex ZA (normative) Normative references to international publications with their corresponding

39、 European publications 61076-4-115 IEC:2003 3 TNOCENTS 1Genertad laa.7 .11Recomm dednemeo dohtf mnitnuog.7 .12Rgnitas dna cahracetrisitcs8 .13Normaitve referneces.9 .14aMrking.01 .15t CEIyed epsoitangin01 .16Oredrni gniformoitan01 2Tecinhcatad la11 .21Defnoitinis.11 .22Surevyo f stylesav dna ritnas2

40、1 .23nIformailppa no noitcoitan31 3Dimnesni lanoiformoitan71 .31General.71 .32Isometriceiv w dna comm nofutaeres81 .33ni gnitaMformoitan.12 .34Fix decennocotr.42 .35Pgul- nicardlddap e52 .36ni gnitnuoMform noitafor fix decennocotr27 .37ni gnitnuoMform noitaforelddap -augrd.82 .38Geguas03 4Cahracetri

41、sitcs53 .41Cilmitac caogetry.53 .42Eelctrical53 .43eMcinahcal83 .44Hhgi-s deepcahracetrisitcs.04 5Tes tcsludehe.34 .51General.34 .52Tes tcselbat eludehs 05 ennAx A (onrmevita) Test m dohtefor eguag soppur gnitforce. 26 .A1Object 26 .A2Prapero noitaf eht sepcimen. 26 .A3Tespiuqe tmnet 26 .A4Tes tmeoh

42、td. 26 .A5Dliates eb ot sepcifeid 46 ennAx B (onrmevita) Tes tm dohteforud s dna tfibr eresisnatce. 56 .B1Object 56 .B2Prapero noitaf eht sepcimen. 56 .B3Tespiuqe tmnet 56 .B4Tes tmeohtd. 66 3egaP 3002:511467016NE xennA amron( AZtiv)e Nromtaiverefer ences ot etnirtaninoal buplacitoins wit hthrie rro

43、cespidnong eporuEap nulbicatoins -67016-4 5113002:CEI 3 CONTENTS 1 General data.15 1.1 Recommended method of mounting .15 1.2 Ratings and characteristics 17 1.3 Normative references.19 1.4 Marking .21 1.5 IEC type designation 21 1.6 Ordering information 21 2 Technical data 23 2.1 Definitions .23 2.2

44、 Survey of styles and variants25 2.3 Information on application 27 3 Dimensional information35 3.1 General .35 3.2 Isometric view and common features37 3.3 Mating information .43 3.4 Fixed connector 49. 3.5 Plug-in card paddle51 3.6 Mounting information for fixed connector55 3.7 Mounting information

45、 for paddle-guard .57 3.8 Gauges61 4 Characteristics71 4.1 Climatic category .71 4.2 Electrical71 4.3 Mechanical 77 4.4 High-speed characteristics.81 5 Test schedule .87 5.1 General .87 5.2 Test schedule tables 101 Annex A (normative) Test method for gauge supporting force .125 A.1 Object 125 A.2 Pr

46、eparation of the specimen.125 A.3 Test equipment 125 A.4 Test method.125 A.5 Details to be specified 129 Annex B (normative) Test method for dust and fibre resistance.131 B.1 Object 131 B.2 Preparation of the specimen.131 B.3 Test equipment 131 .4BTse mtehodt.133 Page3 EN610764115:2003 Annex ZA (nor

47、mative) Normative references to international publications with their corresponding European publications -67016-4 5113002:CEI 3 CONTENTS 1General data.7 1.1Recommended method of mounting.7 1.2Ratings and characteristics8 1.3Normative references.9 1.4Marking.10 1.5IEC type designation10 1.6Ordering

48、information10 2Technical data11 2.1Definitions.11 2.2Survey of styles and variants12 2.3Information on application13 3Dimensional information17 3.1General.17 3.2Isometric view and common features18 3.3Mating information.21 3.4Fixed connector.42 3.5Plug-in card paddle52 3.6Mounting information for fi

49、xed connector27 3.7Mounting information for paddle-guard.28 3.8Gauges30 4Characteristics35 4.1Climatic category.35 4.2Electrical35 4.3Mechanical38 4.4High-speed characteristics.40 5Test schedule.43 5.1General.43 5.2Test schedule tables 50 Annex A (normative) Test method for gauge supporting force. 62 A.1Object 62 A.2Preparation of the specimen. 62 A.3Test equipment 62 A.4Test method. 62 A.5Details to