EN 61069-6-2016 en Industrial-process measurement control and automation - Evaluation of system properties for the purpose of system assessment - Part 6 Assessment of system operab.pdf

《EN 61069-6-2016 en Industrial-process measurement control and automation - Evaluation of system properties for the purpose of system assessment - Part 6 Assessment of system operab.pdf》由会员分享，可在线阅读，更多相关《EN 61069-6-2016 en Industrial-process measurement control and automation - Evaluation of system properties for the purpose of system assessment - Part 6 Assessment of system operab.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、Industrial-process measurement,control and automation Evaluation of system propertiesfor the purpose of system assessmentPart 6: Assessment of system operabilityBS EN 61069-6:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard i

2、s the UK implementation of EN 61069-6:2016. It isidentical to IEC 61069-6:2016. It supersedes BS EN 61069-6:1998 which iswithdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/65, Measurement and control, to Subcommittee GEL/65/1,System considerations.A list of org

3、anizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 201

4、6ISBN 978 0 580 85996 0ICS 25.040.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2016.Amendments/corrigenda issued since publicationDate Text affecte

5、dBRITISH STANDARDBS EN 61069-6:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61069-6 September 2016 ICS 25.040.40 Supersedes EN 61069-6:1998 English Version Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part

6、 6: Assessment of system operability (IEC 61069-6:2016) Mesure, commande et automation dans les processus industriels - Apprciation des proprits dun sytme en vue de son valuation - Partie 6: Evaluation de loprabilit dun systme (IEC 61069-6:2016) Leittechnik fr industrielle Prozesse - Ermittlung der

7、Systemeigenschaften zum Zweck der Eignungsbeurteilung eines Systems - Teil 6: Eignungsbeurteilung der Systembedienbarkeit (IEC 61069-6:2016) This European Standard was approved by CENELEC on 2016-07-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

8、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Stand

9、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are

10、the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Pol

11、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix

12、 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61069-6:2016 E BS EN 61069-6:2016EN 61069-6:2016 2 European foreword The text of document 65A/794/FDIS, future edition 2 of IEC 61069-6, prepared by SC 65A “S

13、ystem aspects“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61069-6:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of

14、an identical national standard or by endorsement (dop) 2017-04-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-07-20 This document supersedes EN 61069-6:1998. Attention is drawn to the possibility that some of the elements of this document

15、 may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61069-6:2016 was approved by CENELEC as a European Standard without any modification. In the official ve

16、rsion, for Bibliography, the following notes have to be added for the standards indicated: IEC 61069-3:2016 NOTE Harmonized as EN 61069-3:201X 1)(not modified). IEC 61069-4:2016 NOTE Harmonized as EN 61069-4:201X 1)(not modified). IEC 61069-8 NOTE Harmonized as EN 61069-8. IEC/TS 62603-1 NOTE Harmon

17、ized as CLC/TS 62603-1. ISO 6385 NOTE Harmonized as EN ISO 6385. ISO 9241-10 NOTE Harmonized as EN ISO 9241-10. ISO 10075-1 NOTE Harmonized as EN ISO 10075-1. ISO 10075-2 NOTE Harmonized as EN ISO 10075-2. ISO 11064-1 NOTE Harmonized as EN ISO 11064-1. ISO 11064-7 NOTE Harmonized as EN ISO 11064-7.

18、1) To be published. BS EN 61069-6:2016EN 61069-6:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appli

19、cation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

20、NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61069-1 2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system

21、 assessment - Part 1: Terminology and basic concepts EN 61069-1 201X 2)IEC 61069-2 2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology EN 61069-2 201X 2)2) To be published. BS EN 61069-6:2

22、016 2 IEC 61069-6:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references. 8 3 Terms, definitions, abbreviated terms, acronyms, conventions and symbols 8 3.1 Terms and definitions 8 3.2 Abbreviated terms, acronyms, conventions and symbols 8 4 Basis of assessment specifi

23、c to operability . 8 4.1 Operability properties 8 4.1.1 General . 8 4.1.2 Efficiency . 10 4.1.3 Intuitiveness 10 4.1.4 Transparency . 11 4.1.5 Robustness 11 4.2 Factors influencing operability . 12 5 Assessment method 12 5.1 General . 12 5.2 Defining the objective of the assessment . 12 5.3 Design a

24、nd layout of the assessment . 12 5.4 Planning of the assessment program . 13 5.5 Execution of the assessment . 13 5.6 Reporting of the assessment . 13 6 Evaluation techniques 14 6.1 General . 14 6.2 Analytical evaluation techniques 15 6.2.1 General . 15 6.2.2 Efficiency . 15 6.2.3 Intuitiveness 15 6

25、.2.4 Transparency . 16 6.2.5 Robustness 16 6.3 Empirical evaluation techniques. 16 6.3.1 General . 16 6.3.2 Efficiency . 16 6.3.3 Intuitiveness 16 6.3.4 Transparency . 17 6.3.5 Robustness 17 6.4 Additional topics for evaluation techniques 17 Annex A (informative) Checklist and/or example of SRD for

26、system operability 18 A.1 General . 18 A.2 Factors resulting from the industrial process itself 18 A.3 Factors related with the task of the operators, their frequency, percentage of time spent, required number of actions, etc. . 19 A.4 Factors due to the control strategy required . 19 A.5 Factors co

27、ncerning the human-machine interface design . 20 A.6 Influence of the workplace on the operability requirements . 20 A.7 General human factors 21 BS EN 61069-6:2016IEC 61069-6:2016 IEC 2016 3 Annex B (informative) Checklist and/or example of SSD for system operability 22 B.1 SSD information 22 B.2 C

28、heck points for system operability . 22 Annex C (informative) Example of a list of assessment items (information from IEC TS 62603-1) . 23 C.1 Overview. 23 C.2 Operability properties of Human Machine Interface (HMI) . 23 C.2.1 General . 23 C.2.2 Control room HMI hardware system configuration 23 C.2.

29、3 Control room HMI hardware machines . 23 C.2.4 Control room HMI hardware monitors . 24 C.2.5 Control room HMI hardware special displays 24 C.2.6 Control room HMI software . 24 C.2.7 Requirements for Local Operator Interface . 25 C.2.8 BPCS localisation 25 Annex D (informative) Phase of a system lif

30、e cycle . 26 Bibliography . 27 Figure 1 General layout of IEC 61069 . 7 Figure 2 Operability . 10 Table D.1 Phases of a system life cycle 26 BS EN 61069-6:2016 4 IEC 61069-6:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION EVALUATION OF

31、 SYSTEM PROPERTIES FOR THE PURPOSEOF SYSTEM ASSESSMENT Part 6: Assessment of system operability FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of

32、 IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (P

33、AS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising wi

34、th the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as n

35、early as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in t

36、hat sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committ

37、ees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide

38、 any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest

39、 edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whethe

40、r direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indi

41、spensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61069

42、-6 has been prepared by subcommittee 65A: System aspects, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the foll

43、owing significant technical changes with respect to the previous edition: a) reorganization of the material of IEC 61069-6:1998 to make the overall set of standards more organized and consistent; b) IEC TS 62603-1 has been incorporated into this edition. BS EN 61069-6:2016IEC 61069-6:2016 IEC 2016 5

44、 The text of this standard is based on the following documents: FDIS Report on voting 65A/794/FDIS 65A/804/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the

45、ISO/IEC Directives, Part 2. A list of all parts in the IEC 61069 series, published under the general title Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system assessment, can be found on the IEC website. The committee has decided that the

46、contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT

47、The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 61069-6:2016 6 IEC 61069-6:2016 IEC 2016 INTRODUCT

48、ION IEC 61069 deals with the method which should be used to assess system properties of a basic control system (BCS). IEC 61069 consists of the following parts. Part 1: Terminology and basic concepts Part 2: Assessment methodology Part 3: Assessment of system functionality Part 4: Assessment of syst

49、em performance Part 5: Assessment of system dependability Part 6: Assessment of system operability Part 7: Assessment of system safety Part 8: Assessment of other system properties Assessment of a system is the judgement, based on evidence, of the suitability of the system for a specific mission or class of missions. To obtain total evidence would require complete evaluation (for example under all influencing factors) of all system properties relevant to the specific mission or cl