EN 61010-2-011-2017 en Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-011 Particular requirements for refrigerating equipment.pdf

《EN 61010-2-011-2017 en Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-011 Particular requirements for refrigerating equipment.pdf》由会员分享，可在线阅读，更多相关《EN 61010-2-011-2017 en Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-011 Particular requirements for refrigerating equipment.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、Safety requirements for electrical equipment for measurement, control, and laboratory usePart 2-011: Particular requirements for refrigerating equipment (IEC 61010-2-011:2016)BS EN 61010-2-011:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME

2、 EUROPENNEEUROPISCHE NORMEN 61010-2-011April 2017ICS 19.080English VersionSafety requirements for electrical equipment for measurement,control, and laboratory use - Part 2-011: Particular requirementsfor refrigerating equipment(IEC 61010-2-011:2016)Rgles de scurit pour appareils lectriques de mesura

3、ge,de rgulation et de laboratoire - Partie 2-011: Exigencesparticulires pour appareils de rfrigration(IEC 61010-2-011:2016)Sicherheitsbestimmungen fr elektrische Mess-, Steuer-, Regel- und Laborgerte - Teil 2-011: Besondere Anforderungen fr KHLGERT(IEC 61010-2-011:2016)This European Standard was app

4、roved by CENELEC on 2016-08-25. CENELEC members are bound to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such natio

5、nal standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own

6、 language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

7、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen

8、 de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 61010-2-011:2017 ENational forewo

9、rdThis British Standard is the UK implementation of EN 61010-2-011:2017. It is identical to IEC 61010-2-011:2016.The UK participation in its preparation was entrusted to Technical Committee EPL/66, Safety of measuring, control and laboratory equipment.A list of organizations represented on this comm

10、ittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 82116 5ICS 19.080

11、Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61010201

12、1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61010-2-011 April 2017 ICS 19.080 English Version Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment (IEC 61010-2-011:2016) Rgles de scu

13、rit pour appareils lectriques de mesurage, de rgulation et de laboratoire - Partie 2-011: Exigences particulires pour appareils de rfrigration (IEC 61010-2-011:2016) Sicherheitsbestimmungen fr elektrische Mess-, Steuer-, Regel- und Laborgerte - Teil 2-011: Besondere Anforderungen fr KHLGERT (IEC 610

14、10-2-011:2016) This European Standard was approved by CENELEC on 2016-08-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b

15、ibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the

16、 responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia,

17、 Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Commit

18、tee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENEL

19、EC Members. Ref. No. EN 61010-2-011:2017 E BS EN 610102011:2017EN 61010-2-011:2017 2 European foreword The text of document 66/589/FDIS, future edition 1 of IEC 61010-2-011, prepared by IEC/TC 66 “Safety of measuring, control and laboratory equipment“ was submitted to the IEC-CENELEC parallel vote a

20、nd approved by CENELEC as EN 61010-2-011:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-21 latest date by which the national standards conflicting with the

21、 document have to be withdrawn (dow) 2020-04-21 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under

22、a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 61010-2-011:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the follow

23、ing notes have to be added for the standards indicated: AdditionIEC 60079-20-1:2010 NOTE Harmonized as EN 60079-20-1:2010. EN ISO 4126-1 NOTE Harmonized as EN ISO 4126-1. EN ISO 4126-2 NOTE Harmonized as EN ISO 4126-2. BS EN 610102011:2017EN 61010-2-011:2017 2 European foreword The text of document

24、66/589/FDIS, future edition 1 of IEC 61010-2-011, prepared by IEC/TC 66 “Safety of measuring, control and laboratory equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61010-2-011:2017. The following dates are fixed: latest date by which the document has to be im

25、plemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-21 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-21 Attention is drawn to the possibility that some of the elements of this docu

26、ment may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text o

27、f the International Standard IEC 61010-2-011:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: AdditionIEC 60079-20-1:2010 NOTE Harmonized as EN 60079-20-1:2010. E

28、N ISO 4126-1 NOTE Harmonized as EN ISO 4126-1. EN ISO 4126-2 NOTE Harmonized as EN ISO 4126-2. EN 61010-2-011:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively re

29、ferenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common mo

30、difications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. AdditionPublication Year Title EN/HD Year IEC 60079-15 2010 Explosive atmospheres - Part 15: Equipment p

31、rotection by type of protection “n“ EN 60079-15 2010 IEC 60335-2-34 2012 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors EN 60335-2-34 2013 + A1 2015 + A1 2015 UL 471 2010 Commercial refrigerators and freezers - - BS EN 610102011:2017Th

32、is page deliberately left blank 2 IEC 61010-2-011:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope and object . 9 2 Normative references. 10 3 Terms and definitions 10 4 Tests . 11 5 Marking and documentation . 13 6 Protection against electric shock 17 7 Protection against mechanical HAZ

33、ARDS 17 8 Resistance to mechanical stresses . 17 9 Protection against the spread of fire . 17 10 Equipment temperature limits and resistance to heat 18 11 Protection against HAZARDS from fluids . 19 12 Protection against radiation, including laser sources, and against sonic and ultrasonic pressure 2

34、9 13 Protection against liberated gases and substances, explosion and implosion 29 14 Components and subassemblies 30 15 Protection by safety interlocks . 30 16 HAZARDS resulting from application. 30 17 RISK assessment . 31 Annexes . 32 Annex G (informative) Leakage and rupture from fluids under pre

35、ssure 32 Annex L (informative) Index of defined terms . 32 Annex AA (normative) Non-sparking “n” electrical apparatus 33 Annex BB (informative) HAZARDS associated with REFRIGERATING SYSTEMS and refrigerants . 34 Annex CC (informative) Safety requirements for components and piping 36 Annex DD (inform

36、ative) Equipment containing FLAMMABLE REFRIGERANTS Information and marking requirements . 41 Bibliography . 44 Figure 101 Schema of a REFRIGERATING SYSTEM incorporating a condenser . 7 Figure 102 Flow chart illustrating the selection process 8 Figure 103 Scratching TOOL tip details 25 Table 1 Symbol

37、s 15 Table 101 Maximum temperatures for motor-compressors 18 Table 102 Minimum temperature for determination of saturated vapor pressure of refrigerant. 20 Table 103 Refrigerant flammability parameters . 28 Table CC.1 Parameters of pressure vessels according to EN 14276-1 . 36 Table CC.2 Parameters

38、of pipping according to EN 14276-2 . 38 Table CC.3 Component and piping requirements 39 2 IEC 61010-2-011:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope and object . 9 2 Normative references. 10 3 Terms and definitions 10 4 Tests . 11 5 Marking and documentation . 13 6 Protection again

39、st electric shock 17 7 Protection against mechanical HAZARDS 17 8 Resistance to mechanical stresses . 17 9 Protection against the spread of fire . 17 10 Equipment temperature limits and resistance to heat 18 11 Protection against HAZARDS from fluids . 19 12 Protection against radiation, including la

40、ser sources, and against sonic and ultrasonic pressure 29 13 Protection against liberated gases and substances, explosion and implosion 29 14 Components and subassemblies 30 15 Protection by safety interlocks . 30 16 HAZARDS resulting from application. 30 17 RISK assessment . 31 Annexes . 32 Annex G

41、 (informative) Leakage and rupture from fluids under pressure 32 Annex L (informative) Index of defined terms . 32 Annex AA (normative) Non-sparking “n” electrical apparatus 33 Annex BB (informative) HAZARDS associated with REFRIGERATING SYSTEMS and refrigerants . 34 Annex CC (informative) Safety re

42、quirements for components and piping 36 Annex DD (informative) Equipment containing FLAMMABLE REFRIGERANTS Information and marking requirements . 41 Bibliography . 44 Figure 101 Schema of a REFRIGERATING SYSTEM incorporating a condenser . 7 Figure 102 Flow chart illustrating the selection process 8

43、Figure 103 Scratching TOOL tip details 25 Table 1 Symbols 15 Table 101 Maximum temperatures for motor-compressors 18 Table 102 Minimum temperature for determination of saturated vapor pressure of refrigerant. 20 Table 103 Refrigerant flammability parameters . 28 Table CC.1 Parameters of pressure ves

44、sels according to EN 14276-1 . 36 Table CC.2 Parameters of pipping according to EN 14276-2 . 38 Table CC.3 Component and piping requirements 39 BS EN 610102011:2017IEC 61010-2-011:2016 IEC 2016 3 Table CC.4 Minimum wall thickness for copper and steel tubing 40 Table DD.1 Quantity of Group A2/A3 refr

45、igerant per occupied space . 43 BS EN 610102011:2017IEC 61010-2-011:2016 IEC 2016 3 Table CC.4 Minimum wall thickness for copper and steel tubing 40 Table DD.1 Quantity of Group A2/A3 refrigerant per occupied space . 43 4 IEC 61010-2-011:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFE

46、TY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 2-011: Particular requirements for REFRIGERATING EQUIPMENT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnic

47、al committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, T

48、echnical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, gover

49、nmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects s