EN 60794-2-2017 en Optical fibre cables - Part 2 Indoor cables - Sectional specification.pdf

《EN 60794-2-2017 en Optical fibre cables - Part 2 Indoor cables - Sectional specification.pdf》由会员分享，可在线阅读，更多相关《EN 60794-2-2017 en Optical fibre cables - Part 2 Indoor cables - Sectional specification.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、Optical fibre cablesPart 2: Indoor cables - Sectional specification (IEC 60794-2:2017)BS EN 60794-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60794-2 October 2017 ICS 33.180.10 Supersedes EN 60794-2:2003

2、English Version Optical fibre cables - Part 2: Indoor cables - Sectional specification (IEC 60794-2:2017) Cbles fibres optiques - Partie 2: Cbles intrieurs - Spcification intermdiaire (IEC 60794-2:2017) Lichtwellenleiterkabel - Teil 2: LWL-Innenkabel - Rahmenspezifikation (IEC 60794-2:2017) This Eur

3、opean Standard was approved by CENELEC on 2017-07-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc

4、es concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE

5、NELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugosl

6、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnica

7、l Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN

8、 60794-2:2017 E National forewordThis British Standard is the UK implementation of EN 60794-2:2017. It is identical to IEC 60794-2:2017. It supersedes BS EN 60794-2:2003, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/86/1, Optical fibres and cabl

9、es.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Sta

10、ndards Limited 2017ISBN 978 0 580 92214 5ICS 33.180.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since public

11、ationDate Text affectedBRITISH STANDARDBS EN 60794-2:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60794-2 October 2017 ICS 33.180.10 Supersedes EN 60794-2:2003 English Version Optical fibre cables - Part 2: Indoor cables - Sectional specification (IEC 60794-2:2017) Cbles fibres optiques

12、- Partie 2: Cbles intrieurs - Spcification intermdiaire (IEC 60794-2:2017) Lichtwellenleiterkabel - Teil 2: LWL-Innenkabel - Rahmenspezifikation (IEC 60794-2:2017) This European Standard was approved by CENELEC on 2017-07-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulati

13、ons which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC memb

14、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official version

15、s. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the N

16、etherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC M

17、anagement Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60794-2:2017 E BS EN 60794-2:2017EN 60794-2:2017 2 European foreword The text of document 86A/1793/FDIS, future edition 4 of IE

18、C 60794-2, prepared by SC 86 A “Fibres and Cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-2:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an iden

19、tical national standard or by endorsement (dop) 2018-04-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-27 This document supersedes EN 60794-2:2003. Attention is drawn to the possibility that some of the elements of this document may be

20、 the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60794-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliog

21、raphy, the following notes have to be added for the standards indicated: IEC 60794-1-2 NOTE Harmonized as EN 60794-1-2. IEC 60794-1-31 NOTE Harmonized as EN 60794-1-31. IEC 609794-2-10 NOTE Harmonized as EN 609794-2-10. IEC 60794-3 NOTE Harmonized as EN 60794-3. IEC 62807-1 NOTE Harmonized as EN 628

22、07-1. BS EN 60794-2:2017EN 60794-2:2017 2 European foreword The text of document 86A/1793/FDIS, future edition 4 of IEC 60794-2, prepared by SC 86 A “Fibres and Cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-2:2017. The followin

23、g dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-27 This docume

24、nt supersedes EN 60794-2:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 6079

25、4-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60794-1-2 NOTE Harmonized as EN 60794-1-2. IEC 60794-1-31 NOTE Harmonized as EN 60794-1-31. IEC 609794-2-

26、10 NOTE Harmonized as EN 609794-2-10. IEC 60794-3 NOTE Harmonized as EN 60794-3. IEC 62807-1 NOTE Harmonized as EN 62807-1. EN 60794-2:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to

27、 in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Public

28、ation has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60304 - Standard colours for i

29、nsulation for low-frequency cables and wires HD 402 S2 - IEC 60793-1-40 - Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC 60793-2-10 2015 Optical fibres - Part 2

30、-10: Product specifications - Sectional specification for category A1 multimode fibres EN 60793-2-10 2016 IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60794-1-1 2015 Optical fibre cables - Part 1-1: G

31、eneric specification - General EN 60794-1-1 2016 IEC 60794-1-21 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods EN 60794-1-21 - IEC 60794-1-22 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable te

32、st procedures - Environmental test methods EN 60794-1-22 - IEC 60794-1-23 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods EN 60794-1-23 - IEC 60794-1-24 - Optical fibre cables - Part 1-24: Generic specification - Basic opti

33、cal cable test procedures - Electrical test methods EN 60794-1-24 - IEC 60794-2 series Optical fibre cables - Part 2: Indoor cables EN 60794-2 series IEC 60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of no

34、n-metallic sheath EN 60811-202 - IEC 60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions EN 60811-203 - IEC/TR 61931 - Fibre optic - Terminology - - ISO/IEC 11801 - Information technology - Generic cabl

35、ing for customer premises - - BS EN 60794-2:2017This page deliberately left blank 2 IEC 60794-2:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviated terms 6 4 Optical fibres . 6 4.1 General . 6 4.2 Transmission requirements . 6 5 Cable

36、elements and cable construction 6 5.1 General . 6 5.2 Buffer 7 5.3 Ruggedized fibre element . 7 5.4 Polymeric tube 7 5.5 Ribbon structure . 7 5.6 Slotted core 7 5.7 Strength and anti-buckling members . 7 5.8 Electrical conductors . 8 5.9 Lay-up of the cable elements 8 5.10 Ripcord . 8 5.11 Sheath 8

37、5.12 Sheath marking . 8 5.13 Identification . 8 5.13.1 General . 8 5.13.2 Fibre identification . 9 5.13.3 Unit colour coding 9 5.13.4 Sheath colour coding . 9 5.14 Examples of cable constructions . 10 6 Installation and operating conditions 10 7 Tests . 10 7.1 General . 10 7.2 Characterization of ca

38、ble elements . 10 7.3 Optical fibre cable tests 11 7.4 Fire performance 12 8 Packaging . 13 9 Quality assurance 13 Bibliography 14 Table 1 Colour coding scheme for units in hybrid or composite cables (example) 9 Table 2 Colour coding of cable outer sheaths (example) 10 Table 3 Characteristic of diff

39、erent types of cable elements . 11 Table 4 Mechanical, environmental, electrical and dimensional applicable tests 12 2 IEC 60794-2:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviated terms 6 4 Optical fibres . 6 4.1 General . 6 4.2 Tra

40、nsmission requirements . 6 5 Cable elements and cable construction 6 5.1 General . 6 5.2 Buffer 7 5.3 Ruggedized fibre element . 7 5.4 Polymeric tube 7 5.5 Ribbon structure . 7 5.6 Slotted core 7 5.7 Strength and anti-buckling members . 7 5.8 Electrical conductors . 8 5.9 Lay-up of the cable element

41、s 8 5.10 Ripcord . 8 5.11 Sheath 8 5.12 Sheath marking . 8 5.13 Identification . 8 5.13.1 General . 8 5.13.2 Fibre identification . 9 5.13.3 Unit colour coding 9 5.13.4 Sheath colour coding . 9 5.14 Examples of cable constructions . 10 6 Installation and operating conditions 10 7 Tests . 10 7.1 Gene

42、ral . 10 7.2 Characterization of cable elements . 10 7.3 Optical fibre cable tests 11 7.4 Fire performance 12 8 Packaging . 13 9 Quality assurance 13 Bibliography 14 Table 1 Colour coding scheme for units in hybrid or composite cables (example) 9 Table 2 Colour coding of cable outer sheaths (example

43、) 10 Table 3 Characteristic of different types of cable elements . 11 Table 4 Mechanical, environmental, electrical and dimensional applicable tests 12 BS EN 60794-2:2017IEC 60794-2:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 2: Indoor cables Sectional speci

44、fication FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizati

45、on in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is en

46、trusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Inte

47、rnational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since

48、 each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content o

49、f IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the la